Home › Products

Product Overview

IMADA ZTS-DPU-2N Force Gauges (Model ZTS-DPU-2N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA ZTS-DPU-2N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.

Brand: IMADA | Category: Force Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

IMADA ZTS-DPU-2N Force Gauges

Technical Specifications

ModelZTS-DPU-2N
Product NameIMADA.ZTS-DPU-2N Sensor Division Type Digital Force Gauges
SeriesIMADA ZTS-DPU / ZTS-DPUH Series (Sensor Division Type Digital Force Gauges)
SpecificationZTS Indication Main unit + external DPU-2N Measuring Force Sensor (a sets Combination)
Measurement TypeForce, Pressure Force ( Pressure Dual toward Measurement)
Rated Capacity2N
Displayed Value2.000N(2000mN)
Resolution0.001N(1mN)
Set Accuracy±0.2% F.S. or less (Sensor and Indicator Combination Rear Accuracy)
Indication Main Unit AccuracyZTS Main unit ±0.2% F.S. ±1digit
Sampling RateMaximum 2000 times / s (Peak and Continuous Data can)
Display Screen4 digits with Unit EL(OLED) Height to than degrees Display, Division three Layer Customisable Display
Display Update Rate16 times / s
Measuring UnitN(≤5N can Display mN; ≥1000N can Display kN), kgf, lbf switchable
Built-in Memory1000 points Measurement Data
Judgment FunctionComparison Device 3 Range Judgment (-NG / OK / +NG), with +NG Alarm
Safe OverloadApprox. 200% F.S.; Load Over Over Approx. 110% F.S. when Warning Display and Alarm
Sensor ModelDPU-2N
Sensor TypePlate Type Measuring Force Sensor ( Pressure two Use)
Sensor Measuring SpindleM6 P1.0(external Thread)
Sensor Wire Length2m(DPU Series optional Length Wire / Height Property Wire to 10m; DPUH N / A Wire Length )
Sensor IP RatingN / A (DPU Standard Type No IP Class)
Sensor Rated Output0.8~1.25mV/V(DPU)
Sensor Linearity / Hysteresis0.12% R.O.(DPU)
Sensor WeightApprox. 325g
Sensor Operating Environment0~+50℃(Allowable -10~+60℃)
Signal OutputUSB, RS232C, ±2VDC Analog Output (D / A), Comparison Device 3 Range Output, Overload Alarm
Power Supplybuilt-in Rechargeable Battery, Continuous Operating Approx. 6.5 hours; Full Approx. 2 hours; standard AC Adapter
Operating EnvironmentTemperature 0~+40℃, Humidity 20~80% RH(non-condensing)
Standard accessoriesAC Adapter, Check Pass / Fail , Driver CD(incl. Data Recording Software Force Logger), USB Wire, Matching Accessories, Portable Case
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


ModelCapacityDisplayed ValueResolution
ZTS-DPU-2N2N2.000N(2000mN)0.001N(1mN)
ZTS-DPU-5N5N5.000N(5000mN)0.001N(1mN)
ZTS-DPU-10N10N10.00N0.01N
ZTS-DPU-20N20N20.00N0.01N
ZTS-DPU-50N50N50.00N0.01N
ZTS-DPU-100N100N100.0N0.1N
ZTS-DPU-200N200N200.0N0.1N
ZTS-DPU-500N500N500.0N0.1N
ZTS-DPUH-1000N1000N1000N(1.000kN)1N(0.001kN)
ZTS-DPUH-2000N2000N2000N(2.000kN)1N(0.001kN)
ZTS-DPUH-5000N5000N5000N(5.000kN)1N(0.001kN)
ZTS-DPUH-10kN10kN10.00kN0.01kN
ZTS-DPUH-20kN20kN20.00kN0.01kN

Key Advantages

  1. Sensor separation designinstructs the host to be separated from the detector sensor (Luad.al), which can be installed in the inner or liner of the equipment, in the clip, in a readable location; the design is officially " fit for internal use in the device, "_._. Or for measurements in special settings, which solves the problem of one-size-fits-all thrusters that cannot be installed in a narrow space
  2. 2000 times/ seconds for high-speed samplingThe maximum ZTS host 2000 times/second sampling can closely follow the sharp force changes and capture instant peaks more accurately (e.g. fracture, instant shock). Official comparison notes: There are significant differences between the destructive test results of the same specimen under the 2000Hz sample and 100Hz, and the data for 2000Hz are less dispersed and more repetitive
  3. 0.2%/ 0.25%F.S. Highwithin the DPU standard (2N 500N) combination 0.2% F.S.; F.S. ; DPU standard segment The DPUH high-volume segment (1000N-20kN) is within 0.25% F.S. Sensor body accuracy: DPU 0.2% F.S.,S-S-S-S-S-S-S-S-S-S-S-S- DPUH 0.1% R.O. (non-linear and delayed 0.1%/0.12% R.O.). R.O
  4. Highlighting Organic EL (OLED) DisplayScreaks-Zx-Z-X-X-X-X-X-X-X-X-X-X-X-X-X4 bit organic EL displays high screen contrast and good visualization, which reduces error in reading; screens are shown in three layers, the middle layer is force value, and the top and bottom two are self-defined as calendars, bar charts,_Black_world_world_world_world_wide_ Compares the information on the set value. Supports the 8 language menu
  5. OK / NG Decision III /Computor, automatically makes -NG/ OK/ +NG, after setting the upper and lower limits, The time limit +NG or -NG indicator is activated; the undesirable items can be automatically selected in conjunction with external devices such as the alarm light, PLC and are suitable for full-scale inspection of the production line. +NG Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1 Q1
  6. 1000 Point Internal Storage + AttachedHost internalized 1000 data storage with peak (pull/pressure) automatically maintained; attached to USB line and data acquisition software ut Lo. Display values and built-in stored data can be passed to the computer (10 times/sec), automatically identifying the minimum value and saving it in CSV format._ Applies to the power of the utrahander software - real-time curves (max. 2000Hz)
  7. Rich External OutputMarked USB, RS232C, 2 VDC Simulation Output (D/A),. Comparer 3 segment output (-NG/OK/+NG), overload alarm output; externalable printer, PLC, recorder, Wireless transmission is also done through the wireless units WL01-ADP/WL01-USB
  8. Sensor lengths are optional and all attachments are completeDPU series standard line length 2m, DPUH series 3m; DPU series optional extension or high-soft line (maximum 10m, maximum) : series standard line length ZX series X-X-ray X- series optional extension or high- DPUH not applicable. Attached are AC adapters, check certificates, drivers CD (including data log software), USB lines, portable boxes and machine-type attachments
  9. Safely overloaded 200%F.SSafe overloading values of about 200%F.S. with a screen displaying warning messages and alerting when loading over approximately 110%F.S. reduces the risk of sensor damage due to mishandling

Applied industry & test project

  • Industry: Electronics and connectors, auto parts and interiors, medical appliances and consumables, packaging and glue products, textiles and cable, hardware springs, new energy batteries and photovoltaic components, third-party testing institutions, science institutes and production line automation places
  • Test: Connector and end-plugged, key and switch hand-sense, packing seal opening and stripping, welding strength and stripping strength, spring and wire pull pressure, thin film and tape striping, Automatic OK/NG determination of integrated force value monitoring (sensor load device) in-house equipment, line full-scope inspection postAVQ

FAQ

Q: What is the difference between ZTS-DPU and ZTS standard type?SpwxSQQQQ1ZX

A:ZTS Standard(ZTS-2N-ZTS-5000N) sensors are integrated with the instruction mainframe, which holds direct measurementsZTS-DPU SeriesYesSensor Separation%consisting of the ZTS indicator host + the extra DPU/DPUH detector sensor, which can be installed on the device, clip or liner by thread and the host is located in a read-friendly position. The instructions are designed to be consistent with the performance of the host and it is official that the direction of accuracy and testing is determined by the combination of sensors and indicators

Q: What's the difference between DPU and DPUH? Q: Q: Q

A: These are two official sections by volume: —DPU StandardOverlayed by 2N ~ 500N, combined with 0.2% F.S., sensor approximately 325g, 500N, S., S., S., S., S, (a) The measurement axis is M6 P1.0 outer thread (M12 P1.75 inner thread after decomposing the measurement axis); Xx Xx XxDPUH High-volume typeCharlieOverlayed 1000N ~ 20kN, combined accuracy 0.25% F.S. Sensor 1000 ~ 5000N about 900g, 10kN about 2.0kg, 20kN about 2.6kg with a measurement axis of M10 P1.5 external thread; Of these, DPUH-10kN/ 20kN without measurement axis, changed to the inner thread of M18 P1.5, depth 22mm (optional measurement axis). The DPUH series has IP64 protection level (sensitized only)

Q: Why are two indicators + sensors? Is it less appropriate?

A: No. ZTS-DPU- is officially definedFull Group Model(Official form entitled "Models of pulling into cum") — The Queen of the Nation — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy Order ZTS-DPU-500N to get the ZTS indicator host + DPU-500N Sensor + corresponding attachments and cables, which will be open for use. If you buy sensors separately (e.g. only DPU-500N), the official description of the case isNot includedStandard attachments such as hooks A-1/S-1 and must be extra amplifiers (indicators) to read.A-HuntsScreak

Q: Can sensors be installed in the device?

A: Yes, this is the design of the series. The official description DPU/DPUH is a transactive pull-on dual-use sensor "with ease of loading into production lines and equipment".! The sensor is connected to the equipment by the external thread of the measurement axis, and the cable is extracted and received from the ZTS mainframe.DPU St. , PUH high-capacity segment 3m, DPU series can be selected with extension or high-soft lines (maximum 10m, which reduces the risk of repeated bending and breaking lines). Reference: 2m

Q: Can you measure the displacement?

A: The ZTS-DPU combination itself only detects the force (ZTS host is not entered anywhere). If you need to record the power - the shift curve at the same time, select the ZTA series (ZTA-DPU), FSA force - a movement measurement unit with a shift I/O) or IMADA. In addition, a separate drawing power - a time curve - can be used for the kopalier software

Q: How do you export data to computers?!??

A: Attached to USB data lines and klo., to transmit host display values and built-in 1000 points to computers (approximately 10 times/s) Software automatically identifies the minimum value and saves it in CSV format, allowing for record retention.ScreenScreech The host is also equipped with an output of RS232C and simulations to accommodate external devices such as PLC, logs, etc.SSSSSS. Reference: 2000Hz

Q: Can you get a test stand or use it for an automatic determination of the production line?

A: Yes. Host belt comparison 3 paragraph output (-NG/ OK/ +NG) and excess alarm output, which can be linked to external alarm lights, The sensor can be incorporated directly into the automated equipment at the workstation, with the equipment's power and the results read out by the ZTS mainframe..Survey of the device.Survey of the device.Survey of the product.SurveyStreats.Survey of the device.ssStStStSSS. Reference: PLC

Q: How long can the battery last?!!?

A: ZTS internal charger cells, which are used continuously for approximately 6.5 hours, full of approximately 2 hours; and the labeled AC adapter, which is available for side charging. Securityly overloaded approximately 200%F.S., displayed and warned on screen over and above 110%F.S.%Charlie Charlie Change

Official Product Positioning

The official position of the ZTS series as ""1 (New Generation Series)— is a combined IMADA measurement device with the necessary improvements, functionality and performance upgrades, which can be installed by the user to support site IMADA-Connected with additional features and download the software and instructions; The series corresponds to a solid ZTS version of the V.5 or more. The official new generation of improvements includes measuring electrical noise further increasing measurement stability, supporting the online updating of the solids, and supporting the development of the new system..The new generation of improvements, including measuring electrical noise, further measuring stability, supporting the online updating of the solids, A variety of software and additional features can be downloaded to enhance ease of use. The official description of the sensor separation is "with external sensors suitable for internal use in the equipment or for measurement in special circumstances" and provides waterproofing, heat-proofing, and water-resistant,symmetrical, `symmetrical'. Multiple sensors, such as pens, are optional.!

Selection Guide

  • Selection by volume: 2N — 500N — ZTS-DPU ; 1000N — 20kN — ZTS-DPUH (high-capacity segment). XC:V-Chant — 20kN Q — — ZX XZ (high
  • It is recommended that the actual test strength should fall to 20 per cent of the rated capacity ~ 80 per cent, with a balance of accuracy and safety
  • Need Force - A Bit Shift Curve: Select the ZTA-DPU series (with a bit shift I/O) instead of ZTS-DPU
  • Multiple tests, such as frequent replacement of sensors, balancing pull with torque, are required: consideration of the eZ-Connect series (sensor interchangeable, corresponding model prefix e, e.g. eDPU-500N)
  • Sensor cables are required to use the device to walk through the device, giving preference to high-soft lines (-BR option) to reduce the risk of break-off
  • For calibration certificates or ISO/IEC 17025 retroactive service, this is a fee-based option, which is consulted separately

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

IMADA ZTS-LM-20kN Force Gauges
Force Gauges

IMADA ZTS-LM-20kN Force Gauges

ZTS-LM-20kN
└ IMADA (Japan)
IMADA ZTS-LM-10kN Force Gauges
Force Gauges

IMADA ZTS-LM-10kN Force Gauges

ZTS-LM-10kN
└ IMADA (Japan)
IMADA ZTS-LM-5000N Force Gauges
Force Gauges

IMADA ZTS-LM-5000N Force Gauges

ZTS-LM-5000N
└ IMADA (Japan)
IMADA ZTS-LM-2000N Force Gauges
Force Gauges

IMADA ZTS-LM-2000N Force Gauges

ZTS-LM-2000N
└ IMADA (Japan)
IMADA ZTS-LM-1000N Force Gauges
Force Gauges

IMADA ZTS-LM-1000N Force Gauges

ZTS-LM-1000N
└ IMADA (Japan)
FeaturedIMADA ZTS-LM-500N Force Gauges
Force Gauges

IMADA ZTS-LM-500N Force Gauges

ZTS-LM-500N
└ IMADA (Japan)