IMADA ZTS-DPUH-10kN Force Gauges (Model ZTS-DPUH-10kN) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA ZTS-DPUH-10kN Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ZTS-DPUH-10kN |
|---|---|
| Product Name | IMADA.ZTS-DPUH-10kN Sensor Division Type Digital Force Gauges |
| Series | IMADA ZTS-DPU / ZTS-DPUH Series (Sensor Division Type Digital Force Gauges) |
| Specification | ZTS Indication Main unit + external DPUH-10kN Measuring Force Sensor (a sets Combination) |
| Measurement Type | Force, Pressure Force ( Pressure Dual toward Measurement) |
| Rated Capacity | 10kN |
| Displayed Value | 10.00kN |
| Resolution | 0.01kN |
| Set Accuracy | ±0.25% F.S. or less (Sensor and Indicator Combination Rear Accuracy) |
| Indication Main Unit Accuracy | ZTS Main unit ±0.2% F.S. ±1digit |
| Sampling Rate | Maximum 2000 times / s (Peak and Continuous Data can) |
| Display Screen | 4 digits with Unit EL(OLED) Height to than degrees Display, Division three Layer Customisable Display |
| Display Update Rate | 16 times / s |
| Measuring Unit | N(≤5N can Display mN; ≥1000N can Display kN), kgf, lbf switchable |
| Built-in Memory | 1000 points Measurement Data |
| Judgment Function | Comparison Device 3 Range Judgment (-NG / OK / +NG), with +NG Alarm |
| Safe Overload | Approx. 200% F.S.; Load Over Over Approx. 110% F.S. when Warning Display and Alarm |
| Sensor Model | DPUH-10kN |
| Sensor Type | Plate Type Measuring Force Sensor ( Pressure two Use) |
| Sensor Measuring Spindle | M18 P1.5 internal Thread (Depth 22mm) |
| Sensor Wire Length | 3m(DPU Series optional Length Wire / Height Property Wire to 10m; DPUH N / A Wire Length ) |
| Sensor IP Rating | IP64(only Sensor Part Division) |
| Sensor Rated Output | 1.5mV/V ±10%(DPUH) |
| Sensor Linearity / Hysteresis | 0.1% R.O.(DPUH) |
| Sensor Weight | 1000~5000N: Approx. 900g; 10kN: Approx. 2.0kg; 20kN: Approx. 2.6kg |
| Sensor Operating Environment | -10~+40℃(Allowable -20~+80℃) |
| Signal Output | USB, RS232C, ±2VDC Analog Output (D / A), Comparison Device 3 Range Output, Overload Alarm |
| Power Supply | built-in Rechargeable Battery, Continuous Operating Approx. 6.5 hours; Full Approx. 2 hours; standard AC Adapter |
| Operating Environment | Temperature 0~+40℃, Humidity 20~80% RH(non-condensing) |
| Standard accessories | AC Adapter, Check Pass / Fail , Driver CD(incl. Data Recording Software Force Logger), USB Wire, Matching Accessories, Portable Case |
| Origin | Japan Control (MADE IN JAPAN) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Capacity | Displayed Value | Resolution |
|---|---|---|---|
| ZTS-DPU-2N | 2N | 2.000N(2000mN) | 0.001N(1mN) |
| ZTS-DPU-5N | 5N | 5.000N(5000mN) | 0.001N(1mN) |
| ZTS-DPU-10N | 10N | 10.00N | 0.01N |
| ZTS-DPU-20N | 20N | 20.00N | 0.01N |
| ZTS-DPU-50N | 50N | 50.00N | 0.01N |
| ZTS-DPU-100N | 100N | 100.0N | 0.1N |
| ZTS-DPU-200N | 200N | 200.0N | 0.1N |
| ZTS-DPU-500N | 500N | 500.0N | 0.1N |
| ZTS-DPUH-1000N | 1000N | 1000N(1.000kN) | 1N(0.001kN) |
| ZTS-DPUH-2000N | 2000N | 2000N(2.000kN) | 1N(0.001kN) |
| ZTS-DPUH-5000N | 5000N | 5000N(5.000kN) | 1N(0.001kN) |
| ZTS-DPUH-10kN | 10kN | 10.00kN | 0.01kN |
| ZTS-DPUH-20kN | 20kN | 20.00kN | 0.01kN |
Q: What is the difference between ZTS-DPU and ZTS standard type?SpwxSQQQQ1ZX
A:ZTS Standard(ZTS-2N-ZTS-5000N) sensors are integrated with the instruction mainframe, which holds direct measurementsZTS-DPU SeriesYesSensor Separation%consisting of the ZTS indicator host + the extra DPU/DPUH detector sensor, which can be installed on the device, clip or liner by thread and the host is located in a read-friendly position. The instructions are designed to be consistent with the performance of the host and it is official that the direction of accuracy and testing is determined by the combination of sensors and indicators
Q: What's the difference between DPU and DPUH? Q: Q: Q
A: These are two official sections by volume: —DPU StandardOverlayed by 2N ~ 500N, combined with 0.2% F.S., sensor approximately 325g, 500N, S., S., S., S., S, (a) The measurement axis is M6 P1.0 outer thread (M12 P1.75 inner thread after decomposing the measurement axis); Xx Xx XxDPUH High-volume typeCharlieOverlayed 1000N ~ 20kN, combined accuracy 0.25% F.S. Sensor 1000 ~ 5000N about 900g, 10kN about 2.0kg, 20kN about 2.6kg with a measurement axis of M10 P1.5 external thread; Of these, DPUH-10kN/ 20kN without measurement axis, changed to the inner thread of M18 P1.5, depth 22mm (optional measurement axis). The DPUH series has IP64 protection level (sensitized only)
Q: Why are two indicators + sensors? Is it less appropriate?
A: No. ZTS-DPU- is officially definedFull Group Model(Official form entitled "Models of pulling into cum") — The Queen of the Nation — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy See — The Holy Order ZTS-DPU-500N to get the ZTS indicator host + DPU-500N Sensor + corresponding attachments and cables, which will be open for use. If you buy sensors separately (e.g. only DPU-500N), the official description of the case isNot includedStandard attachments such as hooks A-1/S-1 and must be extra amplifiers (indicators) to read.A-HuntsScreak
Q: Can sensors be installed in the device?
A: Yes, this is the design of the series. The official description DPU/DPUH is a transactive pull-on dual-use sensor "with ease of loading into production lines and equipment".! The sensor is connected to the equipment by the external thread of the measurement axis, and the cable is extracted and received from the ZTS mainframe.DPU St. , PUH high-capacity segment 3m, DPU series can be selected with extension or high-soft lines (maximum 10m, which reduces the risk of repeated bending and breaking lines). Reference: 2m
Q: Can you measure the displacement?
A: The ZTS-DPU combination itself only detects the force (ZTS host is not entered anywhere). If you need to record the power - the shift curve at the same time, select the ZTA series (ZTA-DPU), FSA force - a movement measurement unit with a shift I/O) or IMADA. In addition, a separate drawing power - a time curve - can be used for the kopalier software
Q: How do you export data to computers?!??
A: Attached to USB data lines and klo., to transmit host display values and built-in 1000 points to computers (approximately 10 times/s) Software automatically identifies the minimum value and saves it in CSV format, allowing for record retention.ScreenScreech The host is also equipped with an output of RS232C and simulations to accommodate external devices such as PLC, logs, etc.SSSSSS. Reference: 2000Hz
Q: Can you get a test stand or use it for an automatic determination of the production line?
A: Yes. Host belt comparison 3 paragraph output (-NG/ OK/ +NG) and excess alarm output, which can be linked to external alarm lights, The sensor can be incorporated directly into the automated equipment at the workstation, with the equipment's power and the results read out by the ZTS mainframe..Survey of the device.Survey of the device.Survey of the product.SurveyStreats.Survey of the device.ssStStStSSS. Reference: PLC
Q: How long can the battery last?!!?
A: ZTS internal charger cells, which are used continuously for approximately 6.5 hours, full of approximately 2 hours; and the labeled AC adapter, which is available for side charging. Securityly overloaded approximately 200%F.S., displayed and warned on screen over and above 110%F.S.%Charlie Charlie Change
The official position of the ZTS series as ""1 (New Generation Series)— is a combined IMADA measurement device with the necessary improvements, functionality and performance upgrades, which can be installed by the user to support site IMADA-Connected with additional features and download the software and instructions; The series corresponds to a solid ZTS version of the V.5 or more. The official new generation of improvements includes measuring electrical noise further increasing measurement stability, supporting the online updating of the solids, and supporting the development of the new system..The new generation of improvements, including measuring electrical noise, further measuring stability, supporting the online updating of the solids, A variety of software and additional features can be downloaded to enhance ease of use. The official description of the sensor separation is "with external sensors suitable for internal use in the equipment or for measurement in special circumstances" and provides waterproofing, heat-proofing, and water-resistant,symmetrical, `symmetrical'. Multiple sensors, such as pens, are optional.!
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.