FSK FLV1-200 Precision Flat Level (Model FLV1-200) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. FSK FLV1-200 precision flat level with V-machined base, 200 mm, 0.02 mm/m sensitivity, JIS class A equivalent V-groove accuracy.
Brand: FSK | Category: Precision Levels
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FLV1-200 |
|---|---|
| Product Name | FSK.FLV1-200 Precision flat level (V Surface plus ) |
| Type | Precision flat level (V Surface plus ) |
| Series | FSK Precision flat level (V Surface plus ) Series |
| Product Code | 6061363 |
| Nominal Dimension (mm) | 200 |
| Sensitivity (mm/m) | 0.02 mm/m |
| L x W x H (mm) | 200×42×44 mm |
| Weight (kg) | 1.8kg |
| Accuracy Class | Bottom Surface V Type Groove Accuracy and JIS A class Same etc. (0.5 Scale or less) |
| V-Groove | V Surface plus (Bottom Surface V Groove Accuracy and JIS A class Same etc., 0.5 Scale or less) |
| Zero Adjustment | with Zero Adjustment cells Screw (with Protection Processing) |
| Body Material | Ferrous (FC200) Installed |
| Supplied Accessories | Included Box |
| Origin | Japan Control (MADE IN JAPAN) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The FSK FLV1-200 (product code 6061363) is a precision flat level with a V-machined base from Fuji Precision Instruments (FSK), Japan. Nominal size 200 mm, sensitivity 0.02 mm/m, overall dimensions 200 × 42 × 44 mm, weight 1.8 kg. The V-groove accuracy of the base is equivalent to JIS class A (within 0.5 divisions), making the level suitable for levelling machine tools, equipment installation and precision measurement. The body is painted cast iron (FC200) and a resin storage case is included.
The FLV1 series is available in 100 / 150 / 200 / 250 / 300 mm nominal sizes at 0.02 mm/m sensitivity: FLV1-100 (100 × 42 × 44 mm, 0.9 kg), FLV1-150 (150 × 42 × 44 mm, 1.3 kg), FLV1-200 (200 × 42 × 44 mm, 1.8 kg), FLV1-250 (250 × 50 × 47 mm, 2.8 kg) and FLV1-300 (300 × 50 × 47 mm, 3.3 kg).
Used in machine-tool manufacture and maintenance, precision equipment installation, mould and gauge making, surface plate verification, automotive and aerospace part machining, third-party metrology and vocational training. Typical checks: level, straightness and flatness of machine guideways and tables, levelling after equipment installation, flatness of surface plates, levelling of cylinders and pipes (V-groove models), daily inspection and accuracy review.
Size: select by the length of the surface; as a rule the level should be at least half as long as the surface for a representative reading. Sensitivity: a smaller figure (e.g. 0.02 mm/m) means a smaller tilt per bubble division and finer reading; general installation and coarse levelling can use 0.1 mm/m or 0.5 mm/m. Accuracy class: JIS class A (including AA) for precision inspection and reports, JIS class B and general grades for routine work. Environment: clean the surface and the instrument base before measuring and avoid temperature differences and hand warmth; insulated grips reduce thermal error. Bubble levels versus digital levels: bubble levels need no power, read directly and are durable and economical for installation and daily checks; digital models give direct numeric readings, fast response and data output where recording, multi-point surveys and archiving are required. The two are often used together.
All figures above are the values published in the official FSK specification, transcribed without conversion or inferred values. Calibration documentation and periodic verification can be arranged on request. This is a quotation-only catalogue; no prices are listed.
For selection advice, a quotation, lead time or an English datasheet, please contact our engineers.