Home › Products

Product Overview

RSK DL-SXYW-S(HID) Precision Levels (Model DL-SXYW-S(HID)) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. RSK DL-SXYW-S(HID) Precision Levels — Precision Levels · Yunke Electronics. Request a quotation and datasheet.

Brand: RSK | Category: Precision Levels

Sales Inquiries: 15626018696 · 78403603@qq.com

RSK DL-SXYW-S(HID) Precision Levels

Technical Specifications

ModelDL-SXYW-S(HID)
Product NameRSK.DL-SXYW-S(HID) Number digits Type Precision Levels(Levelnik)
TypeNumber digits Type Precision Levels(Levelnik)
SeriesRSK(New Management Measure ) Number digits Type Precision Levels(Levelnik)
Product Code00010130
Measuring Range (Mm / M)±5.000
Minimum Reading Value 1 (Mm / M)0.001
Reading Accuracy Conditions 1 (%rdg)±0.85( and Repeat Accuracy Phase than Relatively Large )
Reading Accuracy Conditions 2 (%rdg)±1.0
Reading Accuracy Conditions 3 (%rdg)±2.6( and Repeat Accuracy Phase than Relatively Large )
Reading Accuracy Conditions 4 (%rdg)±2.7
Repeat Accuracy (Mm / M)±0.005 or less
XY Correction Accuracy (%)1( and Repeat Accuracy Phase than Relatively Large )
Measuring Period ()1.1
Power Supply5 No. Battery x2, Included AC Adapter
Body Base Dimensions (Mm)L140xW140
Surface Thread Hole DimensionsM5xP0.8
Body Mass3600g
DimensionsBody Width 189mm × Body Height 100mm × Body Thickness 145mm
JAN Code4975846011465
MaterialBody: Aluminium; Base: not Steel
Standard AccessoriesWarranty Caliper, Operating Instructions, Check Gauge, Box, AC Adapter (DC3V Output, AC100V-240V), 5 No. Battery x2
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Commodity codeModelBody massBody widthCrew_w_w_wBody heightSpunishment of the body heightsBody thicknessCharlieCreaturesJAN code
00010130DL-SXYW-S(HID)3600g189mm100mm145mm750,000 X-ray4975846011465

Key Advantages

  1. The two directions can be measured simultaneously.!
  2. Data can be sent to iOS/ Andog's tablet and smartphones via HID communication
  3. The device name can be identified by an inherent number and the sender data contain the device name to prevent the error
  4. A checklist of performance with guaranteed performance.!
  5. Wireless output corresponds to wired output
  6. Wireless co-intruding does not occur when multiple stations are used at the same time.!
  7. The home body shows measurements, and therefore an inclined measurement is possible
  8. 0 call, 1/2 call is available.SpunishmentSpunctionS
  9. Sensor with a bottom screw hole, which may be fitted with a special base or a clamp

Applied industry & test project

  • Industry: Machine-bed manufacturing and maintenance, precision equipment installation commissioning, platform (platform) and tablet verification, semiconductor and electronic manufacturing equipment, auto parts and components processing, aerospace parts processing, third-party metering and detection agencies, — Physical training in scientific institutions and vocational colleges
  • Test: High-precision level correction of platform and machine bed, straight-line and plane measurements, vertical measurements, tilt and inclination management, installation of equipment levels to keep records, multi-point chain measurement and data automatic collection

FAQ

Q: What type of horizontal instrument is DL-SXYW-S (HID)?

A: DL-SXYW-S (HID) Digital horizontal instrument ( ++) belonging to RSK (new, RSK) for official designation purposes: for platform, High-precision correction of work machinery, etc., and straight-line, plane measurements

Q: What are the official features of the DL-SXYW-S (HID)?

A: Official label: X and Y can be measured simultaneously. Through HID communication, data can be sent to iOS/ And81 for tablets and smartphones._ The device name can be identified by an inherent number and the sender data contain the device name to prevent the error. the check accomplishment table with the guarantee performance. Wireless output corresponds to wired output._..Securing performance.Securing.Secture Wireless intertwining occurs when multiple stations are used. The home body displays measurements, so tilt measurements are possible. 0 calls, 1/2 calls._ Sensor with a bottom screw hole may be fitted with a special base or a plier

Q: What about the sensitivity and accuracy of the horizontal machine? Q

A: The height difference on the length of 1m when the sensitivity (mm/m) indicates the size of the bubble moving 1; the smaller the agility. The accuracy is usually marked as mm/m or the tic. XC Select the corresponding grade at the time of the purchase by the number of the bus band required for the test

Q: Does DL-SXYW-S (HID) need regular calibration?

A: Yes. Bubbles are subject to change in their location as a result of use and handling, and it is recommended that they be sent to the school by the enterprise measurement cycle; the type of machine with the check-out schedule (officially marked with the "check-out sheet with the guarantee performance") can be used directly for receiving and inspection.'SSSecsSecures

Q: What should we do with bubble tubes and digital horizontals? Q

A: Bubble tubes (e.g., home type) do not require power, read-in-diagnostic, robust durability, suitable for machine bed installation and daily matching; digital (e.g., RSK digital horizontal instrument) can read values directly, respond quickly and can export data, — — — Fits for the need for numerical records and data retention.!

Official Product Positioning

RSK (new, RSK) digital horizontal machine ( bearing ån ) DL-SXYW-S (HID), home mass 3600g, The body width 189mm x High 100mm x Thick 145mm, the commodity code 00010130 for high accuracy correction of platforms, work machinery, etc., and straight line, plane measurements

Selection Guide

  • Quantity selection: The recommended horizontal instrument is selected according to the length of the sample and is not less than the size of the measured 1/2 to ensure the representativeness of the readings
  • Sensitivity selection: The smaller the sensitivity value (e.g. 0.02mm/m), the smaller the tilt angle and the more sensitive the reader the bubble shift; the normal installation and rough tone can be selected for 0.1mm/m or 0.5mm/m specifications. XI or 0.5mm/m specifications
  • Precision level: JISA (including AA) for precision detection and report production, JIS B and general level for general operations and routine check-ups
  • Environment: Pre-measurement cleaning by surface and instrument bottom to avoid temperature differentials and hand temperature effects; type of aircraft with thermal insulated rubber / polyurethane holding the position reduces the measurement error caused by temperature. / / / / / / / PUR holding position
  • Periodic calibration: The bubble position can be modified by zero-point adjuster screws (some small and mini-coupled screws are official specifications), which are recommended for regular delivery and the maintenance of check-out schedules

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

RSK ML-150KW Precision Levels
Precision Levels

RSK ML-150KW Precision Levels

ML-150KW
└ RSK Levels
RSK ML-150KB Precision Levels
Precision Levels

RSK ML-150KB Precision Levels

ML-150KB
└ RSK Levels
RSK ML-100KW Precision Levels
Precision Levels

RSK ML-100KW Precision Levels

ML-100KW
└ RSK Levels
RSK ML-100KB Precision Levels
Precision Levels

RSK ML-100KB Precision Levels

ML-100KB
└ RSK Levels
RSK MAL-150BKD Precision Levels
Precision Levels

RSK MAL-150BKD Precision Levels

MAL-150BKD
└ RSK Levels
RSK MAL-150WKD Precision Levels
Precision Levels

RSK MAL-150WKD Precision Levels

MAL-150WKD
└ RSK Levels