Home › Products

Product Overview

RSK DL-mXY Precision Levels (Model DL-mXY) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. RSK DL-mXY Precision Levels — Precision Levels · Yunke Electronics. Request a quotation and datasheet.

Brand: RSK | Category: Precision Levels

Sales Inquiries: 15626018696 · 78403603@qq.com

RSK DL-mXY Precision Levels

Technical Specifications

ModelDL-mXY
Product NameRSK.DL-mXY Number digits Type Precision Levels(Levelnik)
TypeNumber digits Type Precision Levels(Levelnik)
SeriesRSK(New Management Measure ) Number digits Type Precision Levels(Levelnik)
Product Code00010126
Measuring Range (Mm / M)±5.00
Minimum Reading Value 1 (Mm / M)0.01
Reading Accuracy Conditions 1 (%rdg)±3( and ±0.02mm / m Phase than Relatively Large )
Reading Accuracy Conditions 2 (%rdg)±4
Reading Accuracy Conditions 3 (%rdg)±5( and ±0.02mm / m Phase than Relatively Large )
Reading Accuracy Conditions 4 (%rdg)±6
Repeat Accuracy (Mm / M)±0.01 or less
XY Correction Accuracy (%)1( and Repeat Accuracy Phase than Relatively Large )
Measuring Period ()0.8-0.9
Power Supply5 No. Battery x2
Body Base Dimensions (Mm)L100xW100
Surface Thread Hole DimensionsM5xP0.8
Body Mass1400g
DimensionsBody Width 104mm × Body Height 59mm × Body Thickness 105mm
JAN Code4975846011403
MaterialBody: Aluminium; Base Part: Ferrous
Standard AccessoriesWarranty Caliper, Operating Instructions, Check Gauge, Box, 5 No. Battery x2
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Commodity codeModelBody massBody widthCrew_w_w_wBody heightSpunishment of the body heightsBody thicknessCharlieCreaturesJAN code
00010126DL-mXY1400g104mm59mm105mm300,000 X-ray4975846011403

Key Advantages

  1. The two directions can be measured simultaneously.!
  2. Small lightweight.!
  3. A checklist of performance with guaranteed performance.!
  4. Brings RS-232C output, which allows data collection using SK-LOG
  5. The switch to single axle measurements allows the use of the company's plane and straight-line software..SS
  6. The value can be determined over a short period of time compared to the bubble pipe, and there is no digital machine type of the surveyor's reading error
  7. Directly displays the measurement values on the body, and can read them directly
  8. 0 call, 1/2 call is available.SpunishmentSpunctionS
  9. A coiled coil with a base, with special base or plier

Applied industry & test project

  • Industry: Machine-bed manufacturing and maintenance, precision equipment installation commissioning, platform (platform) and tablet verification, semiconductor and electronic manufacturing equipment, auto parts and components processing, aerospace parts processing, third-party metering and detection agencies, — Physical training in scientific institutions and vocational colleges
  • Test: High-precision level correction of platform and machine bed, straight-line and plane measurements, vertical measurements, tilt and inclination management, installation of equipment levels to keep records, multi-point chain measurement and data automatic collection

FAQ

Q: What type of horizontal machine is DL-mXY?

A: DL-mXY Digital horizontal instrument ( ++) belonging to RSK (new, RSK) for official purposes: high level of precision correction for platform, work machinery, etc. And straight and flat measurements

Q: What are the official features of DL-mXY?

A: Official label: two directions can be measured simultaneously: X and Y. Small lightweight type. Check-out accomplishment table with guaranteed performance. With RS-232C output, data collection can be done using SK-LOG. Switch to a single axle measurement, using our flat and straight-line software. A number can be determined in a short time when compared to a bubble pipe, and there is no digital machine type of error in the surveyor's reading. Directly readable. With 0 call, 1/2 call. With a bottom thread, you can install a special base or a clamp

Q: What about the sensitivity and accuracy of the horizontal machine? Q

A: The height difference on the length of 1m when the sensitivity (mm/m) indicates the size of the bubble moving 1; the smaller the agility. The accuracy is usually marked as mm/m or the tic. XC Select the corresponding grade at the time of the purchase by the number of the bus band required for the test

Q: Does DL-mXY require regular calibration?

A: Yes. Bubbles are subject to change in their location as a result of use and handling, and it is recommended that they be sent to the school by the enterprise measurement cycle; the type of machine with the check-out schedule (officially marked with the "check-out sheet with the guarantee performance") can be used directly for receiving and inspection.'SSSecsSecures

Q: What should we do with bubble tubes and digital horizontals? Q

A: Bubble tubes (e.g., home type) do not require power, read-in-diagnostic, robust durability, suitable for machine bed installation and daily matching; digital (e.g., RSK digital horizontal instrument) can read values directly, respond quickly and can export data, — — — Fits for the need for numerical records and data retention.!

Official Product Positioning

RSK (new, RSK) digital horizontal machine ( bearing ån ) DL-mXY, body mass 1400g, , The body width 104mm x High 59mm x Thick 105mm, the commodity code 00010126 for high accuracy correction of platforms, work machinery, etc., and straight line, plane measurements

Selection Guide

  • Quantity selection: The recommended horizontal instrument is selected according to the length of the sample and is not less than the size of the measured 1/2 to ensure the representativeness of the readings
  • Sensitivity selection: The smaller the sensitivity value (e.g. 0.02mm/m), the smaller the tilt angle and the more sensitive the reader the bubble shift; the normal installation and rough tone can be selected for 0.1mm/m or 0.5mm/m specifications. XI or 0.5mm/m specifications
  • Precision level: JISA (including AA) for precision detection and report production, JIS B and general level for general operations and routine check-ups
  • Environment: Pre-measurement cleaning by surface and instrument bottom to avoid temperature differentials and hand temperature effects; type of aircraft with thermal insulated rubber / polyurethane holding the position reduces the measurement error caused by temperature. / / / / / / / PUR holding position
  • Periodic calibration: The bubble position can be modified by zero-point adjuster screws (some small and mini-coupled screws are official specifications), which are recommended for regular delivery and the maintenance of check-out schedules

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

RSK ML-150KW Precision Levels
Precision Levels

RSK ML-150KW Precision Levels

ML-150KW
└ RSK Levels
RSK ML-150KB Precision Levels
Precision Levels

RSK ML-150KB Precision Levels

ML-150KB
└ RSK Levels
RSK ML-100KW Precision Levels
Precision Levels

RSK ML-100KW Precision Levels

ML-100KW
└ RSK Levels
RSK ML-100KB Precision Levels
Precision Levels

RSK ML-100KB Precision Levels

ML-100KB
└ RSK Levels
RSK MAL-150BKD Precision Levels
Precision Levels

RSK MAL-150BKD Precision Levels

MAL-150BKD
└ RSK Levels
RSK MAL-150WKD Precision Levels
Precision Levels

RSK MAL-150WKD Precision Levels

MAL-150WKD
└ RSK Levels