Home › Products

Product Overview

RSK DL-S4W Precision Levels (Model DL-S4W) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. RSK DL-S4W Precision Levels — Precision Levels · Yunke Electronics. Request a quotation and datasheet.

Brand: RSK | Category: Precision Levels

Sales Inquiries: 15626018696 · 78403603@qq.com

RSK DL-S4W Precision Levels

Technical Specifications

ModelDL-S4W
Product NameRSK.DL-S4W Number digits Type Precision Levels(Levelnik)
TypeNumber digits Type Precision Levels(Levelnik)
SeriesRSK(New Management Measure ) Number digits Type Precision Levels(Levelnik)
Product Code00010053
Measuring Range (Mm / M,°)±5.00、±0.286
Minimum Reading Value 1 (Mm / M,°)0.001、0.0001
Minimum Reading Value 2 (Mm / M,°)0.01、0.001
Reading Accuracy Conditions 1 (%rdg)±0.85( and Repeat Accuracy Phase than Relatively Large )
Reading Accuracy Conditions 2 (%rdg)±1.0
Reading Accuracy Conditions 3 (%rdg)±2.6( and Repeat Accuracy Phase than Relatively Large )
Reading Accuracy Conditions 4 (%rdg)±2.7
Repeat Accuracy (Mm / M,°)±0.005, ±0.0003 or less
Power Supply9V Square Battery x1, 8.4V 006P Type Rechargeable Battery x1, Included AC Adapter
Body Base Dimensions (Mm)L150xW55
Surface Thread Hole DimensionsM5xP0.8
Body Mass2000g
DimensionsBody Width 61mm × Body Height 107mm × Body Thickness 158mm
JAN Code4975846010291
MaterialBody: Aluminium; Base Part: Ferrous
Standard AccessoriesWarranty Caliper, Operating Instructions, Check Gauge, Box, AC Adapter (DC9V Output, AC100V-240V), 8.4V 006P Type Rechargeable Battery x2, Charger, DL-S4W Dedicated Recording Software, Electric Terminal Wireless Single Element (USB Type-A)
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Commodity codeModelBody massBody widthCrew_w_w_wBody heightSpunishment of the body heightsBody thicknessCharlieCreaturesJAN code
00010053DL-S4W2000g61mm107mm158mm500,000 X-ray4975846010291

Key Advantages

  1. A checklist of performance with guaranteed performance.!
  2. Precision is higher than DL-m1, m3
  3. Directly displays the measurement values on the body, and can read them directly
  4. Measurement data can be sent wirelessly.!
  5. Measuring values and recording data can be displayed on computers through receivers and display software
  6. Wireless/ wired to be switched, power saved and time spent extended
  7. Automatically completes the drive settings when inserted, using the USB receiving module
  8. Attach a battery charged with 2, which is not interrupted
  9. A coiled coil with a base, with special base or plier

Applied industry & test project

  • Industry: Machine-bed manufacturing and maintenance, precision equipment installation commissioning, platform (platform) and tablet verification, semiconductor and electronic manufacturing equipment, auto parts and components processing, aerospace parts processing, third-party metering and detection agencies, — Physical training in scientific institutions and vocational colleges
  • Test: High-precision level correction of platform and machine bed, straight-line and plane measurements, vertical measurements, tilt and inclination management, installation of equipment levels to keep records, multi-point chain measurement and data automatic collection

FAQ

Q: What type of horizontal machine is DL-S4W?

A: DL-S4W Digital horizontal instrument ( ++) belonging to RSK (new, RSK) for official purposes: high level of precision correction for platform, work machinery, etc. And straight and flat measurements

Q: What are the official features of DL-S4W?

A: Official label: a check accomplishment table with guaranteed performance. Precision is higher than DL-m1, m3. The measurements are shown directly on the body and read directly. The measurements are sent wirelessly..Screech of the data.Screech of the data. The measurements and data can be recorded on the computer by the receiver and display software. Wireless/ wired can be switched, electrical energy saved and time extended. Use USB for receiving units,_ Auto-completes the drive settings after insertion. Attachs a 2 charge cell, which is not interrupted at the time of charging. With a bottom thread hole, you can install a special base or a clamp..Screech power supplyScreech power supplyScresScret

Q: What about the sensitivity and accuracy of the horizontal machine? Q

A: The height difference on the length of 1m when the sensitivity (mm/m) indicates the size of the bubble moving 1; the smaller the agility. The accuracy is usually marked as mm/m or the tic. XC Select the corresponding grade at the time of the purchase by the number of the bus band required for the test

Q: Does DL-S4W require regular calibration?

A: Yes. Bubbles are subject to change in their location as a result of use and handling, and it is recommended that they be sent to the school by the enterprise measurement cycle; the type of machine with the check-out schedule (officially marked with the "check-out sheet with the guarantee performance") can be used directly for receiving and inspection.'SSSecsSecures

Q: What should we do with bubble tubes and digital horizontals? Q

A: Bubble tubes (e.g., home type) do not require power, read-in-diagnostic, robust durability, suitable for machine bed installation and daily matching; digital (e.g., RSK digital horizontal instrument) can read values directly, respond quickly and can export data, — — — Fits for the need for numerical records and data retention.!

Official Product Positioning

RSK (new, RSK) digital horizontal machine ( bearing ån ) DL-S4W, body mass 2000g, , The body width 61mm x High 107mm x Thick 158mm, the commodity code 00010053 for high accuracy correction of platforms, work machinery, etc., and straight line, plane measurements

Selection Guide

  • Quantity selection: The recommended horizontal instrument is selected according to the length of the sample and is not less than the size of the measured 1/2 to ensure the representativeness of the readings
  • Sensitivity selection: The smaller the sensitivity value (e.g. 0.02mm/m), the smaller the tilt angle and the more sensitive the reader the bubble shift; the normal installation and rough tone can be selected for 0.1mm/m or 0.5mm/m specifications. XI or 0.5mm/m specifications
  • Precision level: JISA (including AA) for precision detection and report production, JIS B and general level for general operations and routine check-ups
  • Environment: Pre-measurement cleaning by surface and instrument bottom to avoid temperature differentials and hand temperature effects; type of aircraft with thermal insulated rubber / polyurethane holding the position reduces the measurement error caused by temperature. / / / / / / / PUR holding position
  • Periodic calibration: The bubble position can be modified by zero-point adjuster screws (some small and mini-coupled screws are official specifications), which are recommended for regular delivery and the maintenance of check-out schedules

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

RSK ML-150KW Precision Levels
Precision Levels

RSK ML-150KW Precision Levels

ML-150KW
└ RSK Levels
RSK ML-150KB Precision Levels
Precision Levels

RSK ML-150KB Precision Levels

ML-150KB
└ RSK Levels
RSK ML-100KW Precision Levels
Precision Levels

RSK ML-100KW Precision Levels

ML-100KW
└ RSK Levels
RSK ML-100KB Precision Levels
Precision Levels

RSK ML-100KB Precision Levels

ML-100KB
└ RSK Levels
RSK MAL-150BKD Precision Levels
Precision Levels

RSK MAL-150BKD Precision Levels

MAL-150BKD
└ RSK Levels
RSK MAL-150WKD Precision Levels
Precision Levels

RSK MAL-150WKD Precision Levels

MAL-150WKD
└ RSK Levels