Home › Products

Product Overview

RSK DL-S3L Precision Levels (Model DL-S3L) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. RSK DL-S3L Precision Levels — Precision Levels · Yunke Electronics. Request a quotation and datasheet.

Brand: RSK | Category: Precision Levels

Sales Inquiries: 15626018696 · 78403603@qq.com

RSK DL-S3L Precision Levels

Technical Specifications

ModelDL-S3L
Product NameRSK.DL-S3L Number digits Type Precision Levels(Levelnik)
TypeNumber digits Type Precision Levels(Levelnik)
SeriesRSK(New Management Measure ) Number digits Type Precision Levels(Levelnik)
Product Code00010027
Measuring Range (Mm / M,°)±5.00、±0.286
Minimum Reading Value 1 (Mm / M,°)0.001、0.0001
Minimum Reading Value 2 (Mm / M,°)0.01、0.001
Reading Accuracy Conditions 1 (%rdg)±0.85( and Repeat Accuracy Phase than Relatively Large )
Reading Accuracy Conditions 2 (%rdg)±1.0
Reading Accuracy Conditions 3 (%rdg)±2.6( and Repeat Accuracy Phase than Relatively Large )
Reading Accuracy Conditions 4 (%rdg)±2.7
Repeat Accuracy (Mm / M,°)±0.005, ±0.0003 or less
Power Supply9V Square Battery x1, Included AC Adapter
Base Degree (Mm)±0.04 or less
Body Base Dimensions (Mm)L150xW55
Surface Thread Hole DimensionsM5xP0.8
L Type Base Dimensions (Mm)L255xW55
Body Mass5500g
DimensionsBody Width 229mm × Body Height 215mm × Body Thickness 61mm
JAN Code4975846010277
MaterialBody: Aluminium; Base, L Type Base Part: Ferrous
Standard AccessoriesWarranty Caliper, Operating Instructions, Check Gauge, Box, AC Adapter (DC9V Output, AC100V-240V), 9V Square Battery
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Commodity codeModelBody massBody widthCrew_w_w_wBody heightSpunishment of the body heightsBody thicknessCharlieCreaturesJAN code
00010027DL-S3L5500g229mm215mm61mm650,000 X-ray4975846010277

Key Advantages

  1. A plane type with a digital horizontal instrument DL-S3 on the base seat of L.AVK
  2. Vertical measurements can also be made by means of the L-type base
  3. With magnets, easy to measure the Z axis
  4. Supermagnetic magnets are used to perform column measurements such as work machinery
  5. A slot with 130° V.!
  6. A checklist of performance with guaranteed performance.!
  7. The baseline setting, display value, etc., can be reduced by one key to the 0 call, 1/2 call switch
  8. Digital displays display values through RS-232C signal output

Applied industry & test project

  • Industry: Machine-bed manufacturing and maintenance, precision equipment installation commissioning, platform (platform) and tablet verification, semiconductor and electronic manufacturing equipment, auto parts and components processing, aerospace parts processing, third-party metering and detection agencies, — Physical training in scientific institutions and vocational colleges
  • Test: High-precision level correction of platform and machine bed, straight-line and plane measurements, vertical measurements, tilt and inclination management, installation of equipment levels to keep records, multi-point chain measurement and data automatic collection

FAQ

Q: What type of horizontal machine is DL-S3L?

A: DL-S3L Digital horizontal instrument ( ++) belonging to RSK (new, RSK) for official purposes: high level of precision correction for platform, work machinery, etc. and straight, flat, vertical measurements

Q: What are the official features of DL-S3L?

A: Official label: A machine with a digital horizontal instrument DL-S3 on the base of L. Vertical measurements can also be made with the base L. Magnetic magnets with magnets for Z-axis measurements, A column measuring, for example, of the work machine. A slot with 130°V. A check-out schedule with guaranteed performance. Called, via 0.Screech reporterScreech Standed by 0StanceStightsStreatsStanceSt 1/2 calls the switch to complete the baseline setting and display values by half. The digital monitor can display values via the RS-232C signal

Q: What about the sensitivity and accuracy of the horizontal machine? Q

A: The height difference on the length of 1m when the sensitivity (mm/m) indicates the size of the bubble moving 1; the smaller the agility. The accuracy is usually marked as mm/m or the tic. XC Select the corresponding grade at the time of the purchase by the number of the bus band required for the test

Q: Does DL-S3L require regular calibration?

A: Yes. Bubbles are subject to change in their location as a result of use and handling, and it is recommended that they be sent to the school by the enterprise measurement cycle; the type of machine with the check-out schedule (officially marked with the "check-out sheet with the guarantee performance") can be used directly for receiving and inspection.'SSSecsSecures

Q: What should we do with bubble tubes and digital horizontals? Q

A: Bubble tubes (e.g., home type) do not require power, read-in-diagnostic, robust durability, suitable for machine bed installation and daily matching; digital (e.g., RSK digital horizontal instrument) can read values directly, respond quickly and can export data, — — — Fits for the need for numerical records and data retention.!

Official Product Positioning

RSK (new, RSK) digital horizontal machine ( bearing ån ) DL-S3L, body mass 5500g, , The body width 229mm x High 215mm x Thick 61mm, the commodity code 00010027 for platform, work machinery, etc., is highly accurate and is line, plane, and so forth. Vertical measure_Functioned_Reforms

Selection Guide

  • Quantity selection: The recommended horizontal instrument is selected according to the length of the sample and is not less than the size of the measured 1/2 to ensure the representativeness of the readings
  • Sensitivity selection: The smaller the sensitivity value (e.g. 0.02mm/m), the smaller the tilt angle and the more sensitive the reader the bubble shift; the normal installation and rough tone can be selected for 0.1mm/m or 0.5mm/m specifications. XI or 0.5mm/m specifications
  • Precision level: JISA (including AA) for precision detection and report production, JIS B and general level for general operations and routine check-ups
  • Environment: Pre-measurement cleaning by surface and instrument bottom to avoid temperature differentials and hand temperature effects; type of aircraft with thermal insulated rubber / polyurethane holding the position reduces the measurement error caused by temperature. / / / / / / / PUR holding position
  • Periodic calibration: The bubble position can be modified by zero-point adjuster screws (some small and mini-coupled screws are official specifications), which are recommended for regular delivery and the maintenance of check-out schedules

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

RSK ML-150KW Precision Levels
Precision Levels

RSK ML-150KW Precision Levels

ML-150KW
└ RSK Levels
RSK ML-150KB Precision Levels
Precision Levels

RSK ML-150KB Precision Levels

ML-150KB
└ RSK Levels
RSK ML-100KW Precision Levels
Precision Levels

RSK ML-100KW Precision Levels

ML-100KW
└ RSK Levels
RSK ML-100KB Precision Levels
Precision Levels

RSK ML-100KB Precision Levels

ML-100KB
└ RSK Levels
RSK MAL-150BKD Precision Levels
Precision Levels

RSK MAL-150BKD Precision Levels

MAL-150BKD
└ RSK Levels
RSK MAL-150WKD Precision Levels
Precision Levels

RSK MAL-150WKD Precision Levels

MAL-150WKD
└ RSK Levels