Home › Products

Product Overview

Peacock 47SZ Precision Measuring Tools (Model 47SZ) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock 47SZ Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Peacock | Category: Precision Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Peacock 47SZ Precision Measuring Tools

Technical Specifications

Model47SZ
BrandPEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.)
SeriesPEACOCK Single Rotation Type Z Series
Product TypeMechanical Dial Indicators(Single Rotation Type)
Graduation0.01 mm
Measuring Range0.8 mm(Free Travel 4.0 mm)
Scale Reading40 - 0 - 40
Indication Error MPE (1 / 10 Rotation)8 µm
Indication Error MPE (1 / 2 Rotation)N / A (Single Rotation Type Pointer Stroke not a Rotation, Official not )
Indication Error MPE (1 Rotation)N / A (Single Rotation Type Pointer Stroke not a Rotation, Official not )
Indication Error MPE (Full Range)15 µm
Hysteresis Error (Hysteresis)4 µm
Repeatability3 µm
Measuring Force1.4 N or less
Official FeaturesSmall Dial Type (Ø36); standard Contact Point (XB-1); Flat back cover
Applicable StandardJIS B 7503: 2017(Japan Standard Indicator)
Single Rotation Type DescriptionPointer Stroke not a Rotation, 1 / 2 Rotation and 1 Rotation Indication Error Official not
OriginJapan( OZAKI MFG.CO.,LTD.)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

PEACOCK PEACOCKZ Series Single-Change Indicator Table.%1%2(a) Officially defined as a " high precision table of indications with less than one round of the needle process" that can withstand severe continuous measurements; long main axis is covered with stainless steel material, which is strong and tight and does not fail; With the exception of No. 18 and 17B, the dashboard is marked with a green and orange subsector (enium) and the reading is more visual47SZMinute value 0.01 mm, range of measurements 0.8 mm (free process 4.0 mm) Officially marked indicator error (MPE) 1/10 to 8 µm, full range 15 µm, delayed error 4 µm, Repeated 3 µm, detector 1.4 N, as follows: official features: small-screen type (36); taghead (XB-1); flat cover. PEACOCK (PEACOCK, Japan) is a brand of equipment for the company's end-of-stage production (OZAKI MFG.CO., LTD.) and is a brand of equipment for the company's end-of-life production. . ., LTD.. of the company 'St.'. The percentage table and the thousands table are marked with an accuracy of JIS B 7503: 2017, with model suffix directly indicating structural differences, and within the same range, the fast-tracking pattern is based on the need for the backcap, oil resistance, low-caliber, lift poles, etc. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q


PEACOCK single-transform Z series specification comparison (official HPs extract, 18 models)A-ZX model-H-R-R-R-R-R-R-R-E-E-E-E-L-E-E-E-E-E-E-E-E-E-E-E-E

ModelGraduationMeasuring rangeIndicator error 1/10 transferSplitIndicator error full processHysteresisRepeatabilityForce Measurement
15Z0.001 mm0.16 mm (free travel 3.0 mm)2 µm5 µm2 µm0.5 µm1.5 N
15Z-SWF0.001 mm0.16 mm (free travel 3.0 mm)2 µm5 µm2 µm0.5 µm1.5 N
5Z0.001 mm0.14 mm (free travel 3.0 mm)2 µm5 µm2 µm0.5 µm1.5 N
5Z-XB0.001 mm0.14 mm (free travel 3.0 mm)2 µm5 µm2 µm0.5 µm1.5 N
15DZ0.001 mm0.16 mm (free travel 3.0 mm)2 µm5 µm2 µm0.5 µm1.5 N
180.001 mm0.16 mm (free travel 3.0 mm)2 µm5 µm2 µm0.5 µm1.5 N
36Z0.005 mm0.4 mm (free travel 3.0 mm)5 µm12 µm3 µm3 µm1.4 N
117Z0.01 mm1.0 mm (free travel 7.0 mm)5 µm8 µm3 µm3 µm1.4 N
17Z0.01 mm0.8 mm (free travel 7.0 mm)5 µm8 µm3 µm3 µm1.4 N
17Z-SWA0.01 mm0.8 mm (free travel 7.0 mm)5 µm8 µm3 µm3 µm1.4 N
107Z0.01 mm0.8 mm (free travel 7.0 mm)5 µm8 µm3 µm3 µm1.4 N
107Z-XB0.01 mm0.8 mm (free travel 7.0 mm)5 µm8 µm3 µm3 µm1.4 N
17B0.01 mm0.8 mm (free travel 10 mm)5 µm8 µm3 µm3 µm1.4 N
47SZ0.01 mm0.8 mm (free travel 4.0 mm)8 µm15 µm4 µm3 µm1.4 N
196Z0.01 mm0.8 mm (free travel 4.0 mm)8 µm15 µm4 µm3 µm1.4 N
147Z0.01 mm1.0 mm (free travel 4.0 mm)8 µm15 µm4 µm3 µm1.4 N
47Z0.01 mm0.8 mm (free travel 4.0 mm)8 µm15 µm4 µm3 µm1.4 N
47Z-XB0.01 mm0.8 mm (free travel 4.0 mm)8 µm15 µm4 µm3 µm1.4 N

The above table is an extract of the official specifications of all 18 models in the Z-Swipe Z series, which are quoted directly from the official HPs table, The lateral comparison is facilitated by the selection of the selected type: the default area is determined by the range of measurements and the fractional values, and the indicator error slot meets the accuracy of the position, and the specific model is determined by the hierarchies of the back cover, oil resistance, low-calculation, lifting poles, etc._. Reference: PEACOCK

III. Key Product Advantages

IV. Industries and Typical Applications

V. FAQ

Q: Is 47 SZ a percentage table or a thousand scale? What are the fractions and the range of measurements?
A: Officially marked fraction value 0.01 mm, range of measurements (RaA20) 0.8 mm (free travel 4.0 mm), known as percentage table according to national custom. The fraction value is the amount represented by the small cells on the dashboard, the range of which is the effective process of the pole, which cannot be mixed: the fraction value determines which readings can be fined and the range of measurements determines how far and how far the differential can be measured

Q: Why is the "indicator error MPE" in the argument table in four?
A: Officially given 1/10 rotation, 1/2 rotation,. 1 transition to full-scale maximum permissible error in four: this model 8 µm/ Not applicable (one transition pointer is less than one turn, not officially marked) / not applicable (one transition pointer is less than one turn). The more the number of circles the needles turn, the more the accumulated error, the greater the value of the full sequence. When used, if only a small trip is done, the more the number of the steps are taken. Reference to the error in the Slotting of 1/10 is more meaningful. Reference: 15 µm

Q: What is the difference between the Z series (single transformation) and the standard type?
A: The single conversion process is less than a single pointer, so the official only indicates the error in the instructions for the conversion of 1/10 to the full range. 1/2 is transferred to 1 without marking. The gear rink is short, official indicates that it can withstand a severe continuous measurement; the long main axis is stainless steel. The disadvantage is that the measurement range is very small (this model 0.8 mm (free travel 4.0 mm) which is not a large scale and is suitable for the high accuracy of small journeys

Q: What's the measure? Do the software pieces press on deformation?
A: Officially marked measures 1.4 N below. When you are concerned about the pressure transformation, you should select the official low-calculation type (subfixed to E, initial pressure 0.4 N) when you are looking at film, sheet, plastic, rubber or a very delicate component

Q: Can you use it in workshops with cutting fluids and dust? Q
A: The official description frame reverses are sealed by the O-ring and the back by fillings, which are used for waterproofing the dust structure in the general workshop environment. It is recommended that the official oil-resistant type (suffix SWA/SWF) be selected. Note that the structure is not capable of soaking or high-pressure flushing and that the connection and back caps are removed with reduced protection

Q: Can the head and the holster be changed? How are the accessories matched?!?
A: Yes. The official labels the models for the header (e.g., small tablet type (36); taghead (XB-1); flat backhead, which is reusable and can be replaced by a worksheet shape, (a) Planted, needle-like, etc.; the drums are of different diameters by type (commonly 6.35 mm, 8 mm, 10 mm). The racks, magnetic tablets, head-testing accessories Guangzhou Yunke Electronics can be combined; 8 mm, 10 mm, )s, xxy The order type is sufficient.!

Q: What support can Guangzhou Yunke Electronics provide?
A: The full series of percentage tables for PEACOCK PEACOCK, the selection of the 1,000 scale, the support set with magnetic tablets, the first-class vulnerability measures and daily usage and maintenance advice are available and invited for quotations

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Peacock LH-2 Precision Measuring Tools
Precision Measuring Tools

Peacock LH-2 Precision Measuring Tools

LH-2
└ Peacock (Japan)
Peacock LB-14 Precision Measuring Tools
Precision Measuring Tools

Peacock LB-14 Precision Measuring Tools

LB-14
└ Peacock (Japan)
Peacock LB-9 Precision Measuring Tools
Precision Measuring Tools

Peacock LB-9 Precision Measuring Tools

LB-9
└ Peacock (Japan)
Peacock LB-8 Precision Measuring Tools
Precision Measuring Tools

Peacock LB-8 Precision Measuring Tools

LB-8
└ Peacock (Japan)
Peacock LB-7V Precision Measuring Tools
Precision Measuring Tools

Peacock LB-7V Precision Measuring Tools

LB-7V
└ Peacock (Japan)
Peacock LB-7S Precision Measuring Tools
Precision Measuring Tools

Peacock LB-7S Precision Measuring Tools

LB-7S
└ Peacock (Japan)