Peacock 5-DX Precision Measuring Tools (Model 5-DX) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock 5-DX Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Peacock | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 5-DX |
|---|---|
| Brand | PEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.) |
| Series | PEACOCK Standard Type (0.001 / 0.005 mm) |
| Product Type | Mechanical Pointer Division Gauge (Standard Pointer Type) |
| Graduation | 0.001 mm |
| Measuring Range | 1 mm |
| Scale Reading | 0 - 100 - 0 |
| Indication Error MPE (1 / 10 Rotation) | 2 µm |
| Indication Error MPE (1 / 2 Rotation) | 3.5 µm |
| Indication Error MPE (1 Rotation) | 4 µm |
| Indication Error MPE (Full Range) | 5 µm |
| Hysteresis Error (Hysteresis) | 2 µm |
| Repeatability | 0.5 µm |
| Measuring Force | 1.5 N or less |
| Official Features | Use Type; Back cover with lug (Rotatable lug 90°) |
| Applicable Standard | JIS B 7503: 2017(Japan Standard Indicator) |
| Official Dimensions (Dimensions, Mm) | A 60 mm, B 42.6 mm, C 17 mm, D 55.7 mm, E 14.5 mm, F 20 mm, G 5 mm, H 7 mm, I 52 mm, J 8.0 mm(Dimension code per official drawing) |
| Origin | Japan( OZAKI MFG.CO.,LTD.) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PEACOCK PEACOCKSpecifications: 0.005 mm 0.001. Please contact our engineers for the full technical wording.which corresponds to JIS B 7503: 2017. The main axis is SK Q-ray steel, which is high and tight and does not fail; the seismic apparatus can avoid breaking the gear when the main axis is hit by a sharp start; The frame reverse is sealed by the O-ring and the back by fillings, and is waterproof to dust5-DXDecomposition value 0.001 mm, measurement range 1 mm, official indication error (MPE) 1/10 to 2 µm,Split ) Full-scale 5 µm, delayed-absence 2 µm, repeat 0.5 µm, detector 1.5 N, as follows: Official feature: endurance type; The head coverings (the earrings rotated 90°). PEACOCK (PEACOCK, Japan) is a company-style company, the OZAKI MFG.CO. X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X- The size brand of LTD.) is marked with a percentage and a thousand-point table with an accuracy of 2017, the model suffix directly indicating structural differences, which can be in the same range in the form of a back cap, oil-resistant, oil-resistant, Rapid selection of needs such as low-calculation, lift poles, etc. Reference: JIS B 7503
| Location code_Other Organiser_Other Organiser | A | B | C | D | E | F | G | H | I | J |
| Dimensions (mm)_em_em | 60 | 42.6 | 17 | 55.7 | 14.5 | 20 | 5 | 7 | 52 | 8.0 |
| Model | Graduation | Measuring range | Indicator error 1/10 transferSplit | Indicator error full process | Hysteresis | Repeatability | Force Measurement |
|---|---|---|---|---|---|---|---|
| 5B-HG | 0.001 mm | 1 mm | 1.6 µm | 4 µm | 1.6 µm | 0.5 µm | 1.5 N |
| 5B | 0.001 mm | 1 mm | 2 µm | 5 µm | 2 µm | 0.5 µm | 1.5 N |
| 5F | 0.001 mm | 1 mm | 2 µm | 5 µm | 2 µm | 0.5 µm | 1.5 N |
| 5-DX | 0.001 mm | 1 mm | 2 µm | 5 µm | 2 µm | 0.5 µm | 1.5 N |
| 5-SWF | 0.001 mm | 1 mm | 2 µm | 5 µm | 2 µm | 0.5 µm | 1.5 N |
| 25 | 0.001 mm | 2 mm | 2 µm | 7 µm | 2 µm | 0.5 µm | 1.5 N |
| 25S | 0.001 mm | 2 mm | 2 µm | 7 µm | 2 µm | 0.5 µm | 1.5 N |
| 25F-RE | 0.001 mm | 2 mm | 2 µm | 7 µm | 2 µm | 0.5 µm | 1.5 N |
| 55 | 0.001 mm | 5 mm | 3.5 µm | 10 µm | 3 µm | 1 µm | 1.5 N |
| 55-DX | 0.001 mm | 5 mm | 3.5 µm | 10 µm | 3 µm | 1 µm | 1.5 N |
| 56 | 0.005 mm | 5 mm | 5 µm | 12 µm | 3 µm | 3 µm | 1.5 N |
The above table is an extract of the official specifications of all 11 models, which are the PEACOCK standard type (0.001 / 0.005 mm). The values are quoted directly from the official HP & & Table to facilitate lateral comparison and selection: first, lock the interval by range of measurements and scoring values, then see if the error slot meets the grade accuracy requirement, and finally, backhead form, Oil resistance, low-calculation, lift poles, etc., determines the specific model
Q: Is 5-DX a percentage table or a thousand scale? What are the fractions and the range of measurements?
A: Officially marked fraction value 0.001 mm, range (Raay) 1 mm, which is known as the thousands scale according to national custom. The fraction value is the amount of the cells on the table. The range of measurements is an effective process for the poles, which cannot be mixed: the fractions determine which readings can be fined and the range of measurements determines how far and how far the differentials can be measured
Q: Why is the "indicator error MPE" in the argument table in four?
A: Officially given 1/10 rotation, 1/2 rotation,. 1 transfer to full range maximum permissible error in four: this model is 2 µm/ 3.5 µm/ 4 µm/ 5 µm. The more the loops are turned, The greater the accumulated error, the maximum value for the full step. When you actually use it, it is more meaningful to refer to the error in the trans-routing of 1/10 if you do only a small trip. QuestSSSSSSS
Q: What about the back cover form (with ear cover / flat cover)?
A: The two measures are identical, with only the different way of installing the back cover. The back of the ear is fitted with an ear that can be directly stuck on the staircase or the tester; the back of the flat is a flat surface suitable for the frame trap or for the dedicated positioning plate. This model is: eardeep. The clips are selected in the form of a clamp, and the new pairs confirm the support interface
Q: What's the measure? Do the software pieces press on deformation?
A: Officially marked measures 1.5 N below. When you are concerned about the pressure transformation, you should select the official low-calculation type (subfixed to E, initial pressure 0.4 N) when you are looking at film, sheet, plastic, rubber or a very delicate component
Q: Can you use it in workshops with cutting fluids and dust? Q
A: The official description frame reverses are sealed by the O-ring and the back by fillings, which are used for waterproofing the dust structure in the general workshop environment. It is recommended that the official oil-resistant type (suffix SWA/SWF) be selected. Note that the structure is not capable of soaking or high-pressure flushing and that the connection and back caps are removed with reduced protection
Q: Can the head and the holster be changed? How are the accessories matched?!?
A: Yes. The type of header (e.g., the " Official Characteristics " column of the list of parameters for this type) is officially marked in the parameter and is reusable and can be replaced with a sphere, plane, needle, etc. by the shape of the work;_ The cartridges are fitted with different types of diameter (commonly 6.35 mm, 8 mm, 10 mm). The racks, magnetic tablets, and first-class accessories Guangzhou Yunke Electronics can be matched together and the order type can be made. 6.35 mm, 8 mm, 10 mm
Q: What support can Guangzhou Yunke Electronics provide?
A: The full series of percentage tables for PEACOCK PEACOCK, the selection of the 1,000 scale, the support set with magnetic tablets, the first-class vulnerability measures and daily usage and maintenance advice are available and invited for quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.