Home › Products

Product Overview

Peacock 107-E Precision Measuring Tools (Model 107-E) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock 107-E Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Peacock | Category: Precision Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Peacock 107-E Precision Measuring Tools

Technical Specifications

Model107-E
BrandPEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.)
SeriesPEACOCK Standard Type (0.01 mm)
Product TypeMechanical Dial Indicators(Standard Pointer Type)
Graduation0.01 mm
Measuring Range10 mm
Scale Reading±0 -50- 100
Indication Error MPE (1 / 10 Rotation)5 µm
Indication Error MPE (1 / 2 Rotation)9 µm
Indication Error MPE (1 Rotation)10 µm
Indication Error MPE (Full Range)15 µm
Hysteresis Error (Hysteresis)3 µm
Repeatability3 µm
Measuring Force* 0.4 N or less
Official FeaturesLow Measuring Force Type; Pressure 0.4 N; Back cover with lug (Rotatable lug 90°)
Applicable StandardJIS B 7503: 2017(Japan Standard Indicator)
Official Dimensions (Dimensions, Mm)A 65 mm, B 41.5 mm, C 18.5 mm, D 53 mm, E 14.5 mm, F 20 mm, G 4 mm, H 6.5 mm, I 49 mm, J 8.0 mm(Dimension code per official drawing)
OriginJapan( OZAKI MFG.CO.,LTD.)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

PEACOCK PEACOCKStandard percentage table (0.01 mm)which corresponds to JIS B 7503: 2017, the most widely used in mechanical processing sites. The main axis is SK turret steel, which is strong and secure and does not fail; Earthquake-resistant institutions can avoid breaking gears when the main axis is being stung at an acute speed; the frame rewinds are sealed by O-rings and the backs are sealed by fillings for waterproof dust; the backs are reinforced with 4 screws, The earrings may rotate 90° as installed107-EDecomposition value 0.01 mm, measurement range 10 mm, official indication error (MPE) 1/10 to 5 µm,Split ,Stamp XVX XC , XV Z Z Full-scale 15 µm, delayed-absence 3 µm, repeat-a-3 µm, detector * 0.4 N, as follows: official characteristics: low-caliber type; initial pressure 0.4 N; The head coverings (the earrings rotated 90°). PEACOCK (PEACOCK, Japan) is a company-style company, the OZAKI MFG.CO.. XIXQ. XZX.. XZXAXXAXA. The size brand of LTD.) is marked with a percentage and a thousand-point table with an accuracy of 2017, the model suffix directly indicating structural differences, which can be in the same range in the form of a back cap, oil-resistant, oil-resistant, Rapid selection of needs such as low-calculation, lift poles, etc. Reference: JIS B 7503


Official size (dimenions, unit ~, bit code corresponds to official size)

Location code_Other Organiser_Other OrganiserABCDEFGHIJ
Dimensions (mm)_em_em6541.518.55314.52046.5498.0

Comparison of the PEACOCK standard (0.01 mm) specifications (official FFEF extracts, with 16 models)

ModelGraduationMeasuring rangeIndicator error 1/10 transferSplitIndicator error full processHysteresisRepeatabilityForce Measurement
107-HG0.01 mm10 mm4 µm12 µm2.5 µm3 µm1.4 N
107-DX0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
1070.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107F0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107-SWA0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107-BL0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107-LL0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107F-RE0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107F-T0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
107-E0.01 mm10 mm5 µm15 µm3 µm3 µm* 0.4 N
170.01 mm1 mm5 µm8 µm3 µm3 µm1.4 N
107W0.01 mm10 mm5 µm15 µm3 µm3 µm1.4 N
57-SWA0.01 mm5 mm5 µm12 µm3 µm3 µm1.4 N
570.01 mm5 mm5 µm12 µm3 µm3 µm1.4 N
57F0.01 mm5 mm5 µm12 µm3 µm3 µm1.4 N
57B0.01 mm5 mm5 µm12 µm3 µm3 µm1.4 N

The above table is an extract of the official specifications of all 16 models from the PEACOCK standard (0.01 mm) and is quoted directly from the official HP table, The lateral comparison is facilitated by the selection of the selected type: the default area is determined by the range of measurements and the fractional values, and the indicator error slot meets the accuracy of the position, and the specific model is determined by the hierarchies of the back cover, oil resistance, low-calculation, lifting poles, etc

III. Key Product Advantages

IV. Industries and Typical Applications

V. FAQ

Q: Is 107-E a percentage table or a thousand scale? What are the fractions and the range of measurements?
A: Officially marked fraction value 0.01 mm, range (Raay) 10 mm, which is known as percentage table according to national custom. The fraction value is the amount of the small cells on the table. The range of measurements is an effective process for the poles, which cannot be mixed: the fractions determine which readings can be fined and the range of measurements determines how far and how far the differentials can be measured

Q: Why is the "indicator error MPE" in the argument table in four?
A: Officially given 1/10 rotation, 1/2 rotation,. 1 transfer to full range maximum permissible error in four: this model is 5 µm/ 9 µm/ 10 µm/ 15 µm. The more the loops are turned, The greater the accumulated error, the maximum value for the full step. When you actually use it, it is more meaningful to refer to the error in the trans-routing of 1/10 if you do only a small trip. QuestSSSSSSS

Q: What about the back cover form (with ear cover / flat cover)?
A: The two measures are identical, with only the different way of installing the back cover. The back of the ear is fitted with an ear that can be directly stuck on the staircase or the tester; the back of the flat is a flat surface suitable for the frame trap or for the dedicated positioning plate. This model is: eardeep. The clips are selected in the form of a clamp, and the new pairs confirm the support interface

Q: What's the measure? Do the software pieces press on deformation?
A: Officially marked force * 0.4 N below. When you are concerned about pressure deformation, select the official low-caliber type (subsequent E) when you are looking for film, sheet, plastic, rubber or a very delicate component. (b) The initial pressure 0.4 N

Q: Can you use it in workshops with cutting fluids and dust? Q
A: The official description frame reverses are sealed by the O-ring and the back by fillings, which are used for waterproofing the dust structure in the general workshop environment. It is recommended that the official oil-resistant type (suffix SWA/SWF) be selected. Note that the structure is not capable of soaking or high-pressure flushing and that the connection and back caps are removed with reduced protection

Q: Can the head and the holster be changed? How are the accessories matched?!?
A: Yes. The type of header (e.g., the " Official Characteristics " column of the list of parameters for this type) is officially marked in the parameter and is reusable and can be replaced with a sphere, plane, needle, etc. by the shape of the work;_ The cartridges are fitted with different types of diameter (commonly 6.35 mm, 8 mm, 10 mm). The racks, magnetic tablets, and first-class accessories Guangzhou Yunke Electronics can be matched together and the order type can be made. 6.35 mm, 8 mm, 10 mm

Q: What support can Guangzhou Yunke Electronics provide?
A: The full series of percentage tables for PEACOCK PEACOCK, the selection of the 1,000 scale, the support set with magnetic tablets, the first-class vulnerability measures and daily usage and maintenance advice are available and invited for quotations

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Peacock LH-2 Precision Measuring Tools
Precision Measuring Tools

Peacock LH-2 Precision Measuring Tools

LH-2
└ Peacock (Japan)
Peacock LB-14 Precision Measuring Tools
Precision Measuring Tools

Peacock LB-14 Precision Measuring Tools

LB-14
└ Peacock (Japan)
Peacock LB-9 Precision Measuring Tools
Precision Measuring Tools

Peacock LB-9 Precision Measuring Tools

LB-9
└ Peacock (Japan)
Peacock LB-8 Precision Measuring Tools
Precision Measuring Tools

Peacock LB-8 Precision Measuring Tools

LB-8
└ Peacock (Japan)
Peacock LB-7V Precision Measuring Tools
Precision Measuring Tools

Peacock LB-7V Precision Measuring Tools

LB-7V
└ Peacock (Japan)
Peacock LB-7S Precision Measuring Tools
Precision Measuring Tools

Peacock LB-7S Precision Measuring Tools

LB-7S
└ Peacock (Japan)