Peacock 5S Precision Measuring Tools (Model 5S) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock 5S Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Peacock | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 5S |
|---|---|
| Brand | PEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.) |
| Series | PEACOCK Type |
| Product Type | Mechanical Pointer Division Gauge (Standard Pointer Type) |
| Graduation | 0.001 mm |
| Measuring Range | 1 mm |
| Scale Reading | ±0 -100- 100 |
| Indication Error MPE (1 / 10 Rotation) | 5 µm |
| Indication Error MPE (1 / 2 Rotation) | 6 µm |
| Indication Error MPE (1 Rotation) | 7 µm |
| Indication Error MPE (Full Range) | 10 µm |
| Hysteresis Error (Hysteresis) | 4 µm |
| Repeatability | 2 µm |
| Measuring Force | 1.5 N or less |
| Official Features | standard Contact Point (X-107); Flat back cover; Dial Diameter Ø40.8 mm |
| Applicable Standard | JIS B 7503: 2017(Japan Standard Indicator) |
| Official Dimensions (Dimensions, Mm) | A 43.2 mm, B 30.5 mm, C 12.9 mm, D 40.8 mm, E 12.5 mm, G 4 mm, H 5.1 mm, I 37 mm, J 8.0 mm(Dimension code per official drawing) |
| Origin | Japan( OZAKI MFG.CO.,LTD.) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PEACOCK PEACOCKMini-indicators (0.001 / 0.005 / 0.01 mm)which corresponds to JIS B 7503: 2017. The airframe is compact and the table diameter is small, especially suitable for measurements on a test object or in a narrow space5SSpecifications: PEACOCK JIS B 7503 X-107 0.001 mm 1 mm 5 µm 10 µm 4 µm 2 µm 1.5 N 40.8 mm 1 10 2017 MPE OZAKI MFG CO LTD. Please contact our engineers for the full technical wording.
| Location code_Other Organiser_Other Organiser | A | B | C | D | E | G | H | I | J |
| Dimensions (mm)_em_em | 43.2 | 30.5 | 12.9 | 40.8 | 12.5 | 4 | 5.1 | 37 | 8.0 |
| Model | Graduation | Measuring range | Indicator error 1/10 transferSplit | Indicator error full process | Hysteresis | Repeatability | Force Measurement |
|---|---|---|---|---|---|---|---|
| 5S | 0.001 mm | 1 mm | 5 µm | 10 µm | 4 µm | 2 µm | 1.5 N |
| 47 | 0.01 mm | 4 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
| 47F | 0.01 mm | 4 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
| 57S | 0.01 mm | 5 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
| 36A | 0.005 mm | 3 mm | 6 µm | 12 µm | 3.5 µm | 3 µm | 1.4 N |
| 36B | 0.01 mm | 3 mm | 8 µm | 16 µm | 4 µm | 3 µm | 1.4 N |
The above table is an extract of the official specifications of all the 6 models of the PEACOCK minitypes, which are quoted directly from the official table of the HPs, The lateral comparison is facilitated by the selection of the selected type: the default area is determined by the range of measurements and the fractional values, and the indicator error slot meets the accuracy of the position, and the specific model is determined by the hierarchies of the back cover, oil resistance, low-calculation, lifting poles, etc
Q: Is 5S a percentage table or a thousand scale? What are the fractions and the range of measurements?
A: Officially marked fraction value 0.001 mm, range (Raay) 1 mm, which is known as the thousands scale according to national custom. The fraction value is the amount of the cells on the table. The range of measurements is an effective process for the poles, which cannot be mixed: the fractions determine which readings can be fined and the range of measurements determines how far and how far the differentials can be measured
Q: Why is the "indicator error MPE" in the argument table in four?
A: Officially given 1/10 rotation, 1/2 rotation,. 1 transfer to full range maximum permissible error in four: this model is 5 µm/ 6 µm/ 7 µm/ 10 µm. The more the loops are turned, The greater the accumulated error, the maximum value for the full step. When you actually use it, it is more meaningful to refer to the error in the trans-routing of 1/10 if you do only a small trip. QuestSSSSSSS
Q: What about the back cover form (with ear cover / flat cover)?
A: The two measures are identical, with only the different way of installing the back cover. The back of the ear is fitted with an ear that can be directly stuck on the staircase or the tester; the back of the flat is a flat surface suitable for the frame trap or for the dedicated positioning plate. This model is: flat backhead. The clips are selected in the form of a clamp, and the new pairs confirm the support interface first
Q: What's the measure? Do the software pieces press on deformation?
A: Officially marked measures 1.5 N below. When you are concerned about the pressure transformation, you should select the official low-calculation type (subfixed to E, initial pressure 0.4 N) when you are looking at film, sheet, plastic, rubber or a very delicate component
Q: Can you use it in workshops with cutting fluids and dust? Q
A: The official description frame reverses are sealed by the O-ring and the back by fillings, which are used for waterproofing the dust structure in the general workshop environment. It is recommended that the official oil-resistant type (suffix SWA/SWF) be selected. Note that the structure is not capable of soaking or high-pressure flushing and that the connection and back caps are removed with reduced protection
Q: Can the head and the holster be changed? How are the accessories matched?!?
A: Yes. The official labels the models for the header (e.g., the taghead (X-107); the flat backhead; the diameter of the table 40.8 mm) are reusable and can be replaced by the shape of the worksheet, plane, or object. 40.8 mm A needle type, etc.; the drums are of different diameters by type (commonly 6.35 mm, 8 mm, 10 mm). A scaffold, magnetic tablet, head-checking accessories Guangzhou Yunke Electronics can be combined. 8 mm, 10 mm.sssss, sym The order type is sufficient
Q: What support can Guangzhou Yunke Electronics provide?
A: The full series of percentage tables for PEACOCK PEACOCK, the selection of the 1,000 scale, the support set with magnetic tablets, the first-class vulnerability measures and daily usage and maintenance advice are available and invited for quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.