Peacock 196B Precision Measuring Tools (Model 196B) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock 196B Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Peacock | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 196B |
|---|---|
| Brand | PEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.) |
| Series | PEACOCK Back Position Type |
| Product Type | Mechanical Dial Indicators(Standard Pointer Type) |
| Graduation | 0.01 mm |
| Measuring Range | 5 mm |
| Scale Reading | 0 -50- 100 |
| Indication Error MPE (1 / 10 Rotation) | 8 µm |
| Indication Error MPE (1 / 2 Rotation) | 12 µm |
| Indication Error MPE (1 Rotation) | 14 µm |
| Indication Error MPE (Full Range) | 18 µm |
| Hysteresis Error (Hysteresis) | 4 µm |
| Repeatability | 3 µm |
| Measuring Force | 1.4 N or less |
| Official Features | Sleeve Diameter Ø8 mm; standard Contact Point (X-112) |
| Applicable Standard | JIS B 7503: 2017(Japan Standard Indicator) |
| Official Dimensions (Dimensions, Mm) | A 58.5 mm, B 38 mm, C 12.5 mm, D 4.5 mm, H 5.5 mm, I 16.5 mm(Dimension code per official drawing) |
| Origin | Japan( OZAKI MFG.CO.,LTD.) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PEACOCK PEACOCKBackpost bar percentometer (0.01 mm)Specifications: JIS B 7503 2017. Please contact our engineers for the full technical wording.196BSpecifications: PEACOCK JIS B 7503 X-112 0.01 mm 5 mm 8 µm 18 µm 4 µm 3 µm 1.4 N 8 mm 1 10 2017 MPE OZAKI MFG CO LTD. Please contact our engineers for the full technical wording.
| Location code_Other Organiser_Other Organiser | A | B | C | D | H | I |
| Dimensions (mm)_em_em | 58.5 | 38 | 12.5 | 4.5 | 5.5 | 16.5 |
| Model | Graduation | Measuring range | Indicator error 1/10 transferSplit | Indicator error full process | Hysteresis | Repeatability | Force Measurement |
|---|---|---|---|---|---|---|---|
| 196A | 0.01 mm | 5 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
| 196A-6 | 0.01 mm | 5 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
| 196B | 0.01 mm | 5 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
| 196B-T | 0.01 mm | 5 mm | 8 µm | 18 µm | 4 µm | 3 µm | 1.4 N |
The above table is an extract of the official specifications of all 4 models of PEACOCK backpost plugs, which are quoted directly from the official table of the HPs, The lateral comparison is facilitated by the selection of the selected type: the default area is determined by the range of measurements and the fractional values, and the indicator error slot meets the accuracy of the position, and the specific model is determined by the hierarchies of the back cover, oil resistance, low-calculation, lifting poles, etc
Q: Is 196B a percentage table or a thousand scale? What are the fractions and the range of measurements?
A: Officially marked fraction value 0.01 mm, range (Raay) 5 mm, which is known as percentage table according to national custom. The fraction value is the amount of the small cells on the table. The range of measurements is an effective process for the poles, which cannot be mixed: the fractions determine which readings can be fined and the range of measurements determines how far and how far the differentials can be measured
Q: Why is the "indicator error MPE" in the argument table in four?
A: Officially given 1/10 rotation, 1/2 rotation,. 1 transfer to full range maximum permissible error in four: this model is 8 µm/ 12 µm/ 14 µm/ 18 µm. The more the loops are turned, The greater the accumulated error, the maximum value for the full step. When you actually use it, it is more meaningful to refer to the error in the trans-routing of 1/10 if you do only a small trip. QuestSSSSSSS
Q: What about the back cover form (with ear cover / flat cover)?
A: The two measures are identical, with only the different way of installing the back cover. The back of the ear is fitted with an ear that can be directly stuck on the staircase or the tester; the back of the flat is a flat surface suitable for the frame trap or for the dedicated positioning plate. This model is: Officially marked in the list of parameters.s for the new setup are selected in the form of a clamp..Stamps for the current set of clips are selected by the folder.Stands are selected by the new
Q: What's the measure? Do the software pieces press on deformation?
A: Officially marked measures 1.4 N below. When you are concerned about the pressure transformation, you should select the official low-calculation type (subfixed to E, initial pressure 0.4 N) when you are looking at film, sheet, plastic, rubber or a very delicate component
Q: Can you use it in workshops with cutting fluids and dust? Q
A: The official description frame reverses are sealed by the O-ring and the back by fillings, which are used for waterproofing the dust structure in the general workshop environment. It is recommended that the official oil-resistant type (suffix SWA/SWF) be selected. Note that the structure is not capable of soaking or high-pressure flushing and that the connection and back caps are removed with reduced protection
Q: Can the head and the holster be changed? How are the accessories matched?!?
A: Yes. The official labels the models for the header (e.g., a cylinder diameter 8 mm; a standard head (X-112 with a changeable head, which can be replaced by a work-form shape, a plane, needle, etc.); 8 mm; The cartridges are fitted with different types of diameter (commonly 6.35 mm, 8 mm, 10 mm). The racks, magnetic tablets, and first-class accessories Guangzhou Yunke Electronics can be matched together and the order type can be made. 6.35 mm, 8 mm, 10 mm.s, and the order type is sufficient.s
Q: What support can Guangzhou Yunke Electronics provide?
A: The full series of percentage tables for PEACOCK PEACOCK, the selection of the 1,000 scale, the support set with magnetic tablets, the first-class vulnerability measures and daily usage and maintenance advice are available and invited for quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.