Peacock DL-2S Precision Measuring Tools (Model DL-2S) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock DL-2S Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Peacock | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DL-2S |
|---|---|
| Brand | PEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.) |
| Series | PEACOCK Linearity Measure Micro Instrument (2mm / 5mm Range) |
| Product Type | Linearity Measure Micro Instrument (Displacement Sensor) |
| Model | Rod Type (Lever Type) |
| Measuring Range | 2mm( 1) |
| Resolution | 0.001mm |
| Accuracy (Excluding Quantisation Error) | 0.003mm |
| Measuring Force | 0.6N or less |
| Installation Method (Mounting Method) | Type Rear Ø6.5mm Hole or Bottom Part Groove |
| Contact Point | SØ2mm Hardness |
| Cable Length (Cord Length) | 2m |
| Operating Temperature | 0 - 40℃ |
| Output Signal | 90° Phase digits Difference, 20µm cells (R03-PB8M Connection Device) |
| with Counting Device | C-500 / C-700 / CM-5B |
| Optional Accessories | 2, 3, 5, 10m Length Cable optional |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PEACOCK PEACOCKPEACOCK linear micrometer (2mm/ 5mm process)ScreaksScrePEACOCK linear micrometers are the sensor home of the transposition to telecom output and are used in conjunction with the C-500/C-700/CM-5B equivalent. XC. XC XCVCs.SSVS / X DL-2 / DL-2S for leverage (officially indicated as a straight-line movement, non-leveraging table arc motion); D-5 / D-5S for pen; XC / D-5S for example: XC of the XV / / D-5S for XCystrange / Z XV / -5UZ is small (cut off)DL-2SThe official parameters are: type Leverut; range of measurements (Ra-Att) 2mm (note 1); Resolution (XX) 0.001mm; accuracy (excluding quantitative error) 0.003mm
Note 1: Levered to a straight motion, unlike arc motion in a leveraged table。
The following are officially published parameters of the Japanese Obsaki Institute (OZAKI MFG.CO., LTD.), which are reproduced in the original language of the Japanese company without any conversion or speculation
Key differences in the same series of models are shown below, which facilitate the matching of selected models
| Model | Resolution | Measuring range | Accuracy (Excluding Quantisation Error) |
|---|---|---|---|
| DL-2 | 0.01mm | 2mm | 0.01mm |
| DL-2S | 0.001mm | 2mm | 0.003mm |
| D-5 | 0.01mm | 5mm | 0.005mm |
| D-5S | 0.001mm | 5mm | 0.002mm |
| D-5UZ | 0.01mm | 5mm | 0.01mm |
Q: Can linear micrometers read directly?
A: No. Linear micrometers produce a differential signal of 90°. Values are shown by coordinating with PEACOCK digital counters (C-500 / C-700 / CM-5B or high resolution C-100HS). /S or C-100HS.SSSSSS
Q: What's the difference between DL-2 and D-5?SQ
A: DL-2 installed for leveraged, mass 2mm, eardeleted backhead 6.5mm hole or bottom tusks; D-5 pen, mass 5mm, D-5, Installation of 8mm pole
Q: How do you distinguish resolution?!!?
A: Official naming rules: The model without S is 0.01mm resolution and the model with S is 0.001mm resolution.StampSSplitS-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S-S
This page is marked by the official published value PEACOCK (PEACOCK, Japan), which is distributed for selection; call or correspondence for spot, delivery and price. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.