Peacock DN-10 Precision Measuring Tools (Model DN-10) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock DN-10 Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Peacock | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DN-10 |
|---|---|
| Brand | PEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.) |
| Series | PEACOCK Linearity Measure Micro Instrument (10mm / 20mm Range) |
| Product Type | Linearity Measure Micro Instrument (Displacement Sensor) |
| Measuring Range | 10mm |
| Resolution | 0.01mm |
| Accuracy (Excluding Quantisation Error) | 0.01mm |
| Measuring Force | 1.0N or less |
| Weight | 220g |
| Output Signal | 90° Phase digits Difference, 20µm cells (R03-PB8M Connection Device), Method Wave (L=0V H=5V) |
| Cable Length | 2m |
| Installation Method (Mounting Method) | Ø8mm Rod Clamping or Type Rear Ø6.5mm Hole |
| Contact Point | M2.5 × 0.45 SØ2.4mm Steel (X-2) |
| Operating Temperature | 0 - 40℃ |
| with Counting Device | C-500 / C-700 / CM-5B(DN-10S, DN-20S except external) |
| Optional Accessories (Options) | No.RE-4L, Rod No.LL-1, Dustproof Rubber No.BG-10, Flat back cover No.GB3-D1O, No.S-110 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PEACOCK PEACOCKPEACOCK linear micrometer (10mm/ 20mm process)ScreaksScreLinear micrometers for the 10mm and 20mm scales, officially stated as best used, which can be matched by a digital counter to replace the original percentage table with the installation location, Supports the installation of 8mm poles with a back-head or ear type. The DN series is a square wave output type suitable for electrical noise environments and 10 - 50m long cable extensionsDN-10The official parameters are: range of measurements (RaA) 10mm; resolution ( ) 0.01mm; accuracy (excluding quantitative error) 0.01mm;;. The measurements (Measuringenten) are below 1.0N
Square wave output type: suitable for electrical noise environment and 10-50m cable extensionsScreaks--ZX-Z-X-X-X-X-X。
The following are officially published parameters of the Japanese Obsaki Institute (OZAKI MFG.CO., LTD.), which are reproduced in the original language of the Japanese company without any conversion or speculation
Key differences in the same series of models are shown below, which facilitate the matching of selected models
| Model | Resolution | Measuring range | Accuracy (Excluding Quantisation Error) |
|---|---|---|---|
| D-10 | 0.01mm | 10mm | 0.005mm |
| D-10S | 0.001mm | 10mm | 0.002mm |
| DN-10 | 0.01mm | 10mm | 0.01mm |
| DN-10S | 0.001mm | 10mm | 0.002mm |
| D-20 | 0.01mm | 20mm | 0.005mm |
| D-20S | 0.001mm | 20mm | 0.003mm |
| DN-20 | 0.01mm | 20mm | 0.01mm |
| DN-20S | 0.001mm | 20mm | 0.003mm |
Q: What's the difference between D-10 and DN-10?
A: Different output forms: D series output 90° phase sine signal; DN series for a side wave output (L=0V, H=5V) An event suitable for electrical noise environment extensions to 10-50m cable..ScreakssScreaks
Q: How do you distinguish resolution?!!?
A: Model 0.01mm without S and Model 0.001mm with S (e. g. D-10 for 0.01mm, D-10S for 0.001mm). for 0.01mm, 0.001mm for . XV. XS XV XV
Q: What should be the attention when reloading?!?
A: Official reminder: Rewinding (on the main axis) must be stated at the order because the inverted post-caliber force changes.!
This page is marked by the official published value PEACOCK (PEACOCK, Japan), which is distributed for selection; call or correspondence for spot, delivery and price. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.