Peacock D-10HS Precision Measuring Tools (Model D-10HS) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Peacock D-10HS Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Peacock | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | D-10HS |
|---|---|
| Brand | PEACOCK JapanPeacock( Type OZAKI MFG.CO.,LTD.) |
| Series | PEACOCK Height Resolution Type Linearity Measure Micro Instrument (0.1µm / 0.5µm) |
| Product Type | Linearity Measure Micro Instrument (Height Resolution Type) |
| Measuring Range | 10mm |
| Resolution | 0.0001mm(0.1µm) |
| Accuracy (Excluding Quantisation Error) | 0.0005mm |
| Measuring Force | 1.0N or less |
| Cable Length | 2m |
| Operating Temperature | 0 - 40℃ |
| Contact Point | M2.5 × 0.45 SØ2.4mm Steel (X-2) |
| Installation Method (Mounting Method) | Ø8mm Rod (not Back cover with lug Installation digits) |
| Weight | 200g |
| Output Signal | 90° Phase digits Difference, 8µm cells (R03-PB8M Connection Device) |
| with Counting Device | C-100HS(NEW) |
| Standard Accessories | Main Shaft above Rod (D-10HS Dedicated, not Provided Accessories) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
PEACOCK PEACOCKPEACOCK High Resolution Linear Micrometer (0.1µm / 0.5µm)High-resolution linear micrometers using linear rulers, officially indicating that they can increase accuracy and reduce temperature effects. resolution 0.0005mm (0.5µm), D-10HS resolution 0.0001mm (0.1µm) with new array C-100HS for use. Reference: D-10SSD-10HSThe official parameters are: range of measurements (RaA) 10mm; resolution ( ) 0.0001mm (0.1µm); accuracy (excluding quantitative error) 0.0005mm; ; The measurements below 1.0N.!
Use linear scales, official indications that they can increase accuracy and reduce temperature effects;The official label does not provide a seat for the back of the ear。
The following are officially published parameters of the Japanese Obsaki Institute (OZAKI MFG.CO., LTD.), which are reproduced in the original language of the Japanese company without any conversion or speculation
Key differences in the same series of models are shown below, which facilitate the matching of selected models
| Model | Resolution | Measuring range | Accuracy (Excluding Quantisation Error) |
|---|---|---|---|
| D-10SS | 0.0005mm | 10mm | 0.001mm |
| D-10HS | 0.0001mm | 10mm | 0.0005mm |
Q: Does D-10SS have the same output signal as D-10HS?SpwKX1?SpwKSp
A: Different. D-10SS output 90° difference, 20µm spacing signal; D-10HS output ZX variance; 8µm spacing signal.Split by D-10HS; 90 variance; 8µm signal use: output/Step/StampStStight by Both are accompanied by C-100HS counters
Q: Can you put a back ear cover on D-10HS?
A: No. Officially labeled D-10HS only supports the installation of the 8mm pole, without the back-hear seating; and the plant is marked with a lever on the main axis, without providing the pull-up release attachment
Q: How does D-10SS install?
A: Officially marked as 8mm poles, or installed with ear coverings (6.5mm hole)
This page is marked by the official published value PEACOCK (PEACOCK, Japan), which is distributed for selection; call or correspondence for spot, delivery and price. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.