KROEPLIN POCO2T Precision Measuring Tools (Model POCO2T) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. KROEPLIN POCO2T Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: KROEPLIN | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | POCO2T |
|---|---|
| Brand | Germany KROEPLIN(Kroeplin GmbH, Germany) |
| Series | KROEPLIN Measure Thickness Caliper Gauges(external Caliper Gauges · Thin Film and Material Measure Thickness) |
| Product Type | Measure Thickness Caliper Gauges(Thickness Measurement Type) |
| Origin | Germany |
| Alias / Alternative Name | Thickness Measurement Instrument, Measure Thickness Caliper Gauge |
| Measuring Range | 0.00 mm ~ 10.00 mm |
| Contact Point Stroke | 10.00 mm |
| Indication Range | 0.00-10.00 mm |
| Measuring Force | 0.3-1.3(Min) - N |
| Contact Point Type | Flat Φ10 |
| Fixed Anvil | 3 mm |
| Movable Spindle | 5 mm |
| Measuring Depth L Max | 36 mm |
| Indication Method | Pointer Type / Mechanical |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
KROEPLIN Krauplin, Germany (Kroeplin GmbH)KROEPLIN Thick Card Rule (Extracard Rule. Thin film and foam materials thickening)A-HunnersScreaksOfficially classified as "Extracard Rule - Thick Card Rule ", corresponding to the German Folien-und Schaumstoffesung (Measuring film and foam materials), for paper, film, slab, : The thickness of the sheet and foam material is measured. Model T is the thickness test, D*T is a pointer/mechanical, K*T and C*T are visible/electronic, and is a single POCO2T. Measuring range 0 - 10mm to 0 - 100mm,ScreaksScreak and dedicated to a large number of stages (D4100T/K4100T) of 50 - 100mmPOCO2TThe official parameters are: measurement range 0.00 mm ~ 10.00 mm; head starter process 10.00 mm; measurement depth L max 36 mm; instructional mode pointer/mechanical
The following are the official parameters published by the Chinese Official Network (CNN) of KROEPLIN, which, without any conversion or speculation, is reproduced in the official language of the unit and the expression; items not officially published are not included in the table
Key differences in the same series of models are shown below, which facilitate the matching of selected models
| Model | Measuring range | Contact Point Stroke | Indication Accuracy | Measurement depth L ax | Indication Method |
|---|---|---|---|---|---|
| C110T | 0.00 mm ~ 10.00 mm | 10.00 mm | Not specified in the official specification table | 35 mm | Digital / Electronic |
| C12100T | 0.00 mm ~ 100.00 mm | 100.00 mm | 0.1 mm | 550 mm | Digital / Electronic |
| C220T | 0.00 mm ~ 20.00 mm | 20.00 mm | Not specified in the official specification table | 85 mm | Digital / Electronic |
| C330T | 0.00 mm ~ 30.00 mm | 30.00 mm | Not specified in the official specification table | 116 mm | Digital / Electronic |
| C450T | 0.00 mm ~ 50.00 mm | 50.00 mm | Not specified in the official specification table | 167 mm | Digital / Electronic |
| D110T | 0.00 mm ~ 10.00 mm | 10.00 mm | 0.005 mm | 35 mm | Analog / Mechanical |
| D12100T | 0.00 mm ~ 100.00 mm | 100.00 mm | 0.1 mm | 550 mm | Analog / Mechanical |
| D220T | 0.00 mm ~ 20.00 mm | 20.00 mm | 0.01 mm | 85 mm | Analog / Mechanical |
| D4100T | 50.00 mm ~ 100.00 mm | 50.00 mm | 0.05 mm | 167 mm | Analog / Mechanical |
| D450T | 0.00 mm ~ 50.00 mm | 50.00 mm | 0.05 mm | 167 mm | Analog / Mechanical |
| D8100T | 0.00 mm ~ 100.00 mm | 100.00 mm | 0.1 mm | 375 mm | Analog / Mechanical |
| K110T | 0.00 mm ~ 10.00 mm | 10.00 mm | 0.005 mm | 35 mm | Digital / Electronic |
| K220T | 0.00 mm ~ 20.00 mm | 20.00 mm | 0.01 mm | 85 mm | Digital / Electronic |
| K330T | 0.00 mm ~ 30.00 mm | 30.00 mm | 0.01 mm | 116 mm | Digital / Electronic |
| K4100T | 50.00 mm ~ 100.00 mm | 50.00 mm | 0.01 mm | 167 mm | Digital / Electronic |
| K450T | 0.00 mm ~ 50.00 mm | 50.00 mm | 0.01 mm | 167 mm | Digital / Electronic |
| K8100T | 0.00 mm ~ 100.00 mm | 100.00 mm | 0.05 mm | 375 mm | Digital / Electronic |
| POCO2T | 0.00 mm ~ 10.00 mm | 10.00 mm | Not specified in the official specification table | 36 mm | Analog / Mechanical |
Q: Why are the measures of the thick-card rule flat and spherical? Q: Why
A: Official tabulation of the table of parameters by type of point: D110T and C110T in flat, 6 in flat, 10 in flat, XX 110T is spherical, 5. The flat point is wide and suitable for thin film and soft material; the spherical point is suitable for hard plate. Reference: POCO2T
Q: Which paragraph should be selected for soft materials?
A: Preference for low-caliber type: POCO2T Official markers 0.3 - 1.3N, flat, 10 point, Measurement range 0 - 10mm, depth 36mm
Q: What about the thicker pieces of 50mm and above? Q: What
A: Select a 50 - 100mm section: D4100T (pointing, indicator accuracy 0.05mm) or K4100T (number display, indicator accuracy 0.01mm) The depths of the measurements were 167mm
Q: What does the T tail stand for?
A: The official rule of name with no suffix indicates that the model with T is classified as "Extracard-Specific Card Regulations" for the measurement of film and foam materials
This page parameter is the official German KROEPLIN (Kroeplin GmbH) published for selection; call or correspondence is requested for spot, delivery and price. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.