BETTEN NTW-200 Tension Meters (Model NTW-200) is a Tension Meters supplied by Guangzhou Yunke Electronics Co., Ltd. BETTEN NTW-200 Tension Meters — Tension Meters · Yunke Electronics. Request a quotation and datasheet.
Brand: BETTEN | Category: Tension Meters
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | NTW-200 |
|---|---|
| Series | BETTEN NTW Series with Material Tension Instrument |
| Series Positioning | NTW Series Minimum Range |
| Tension Range | 2.0-200.0 cN |
| Tension Range (Conversion) | Approx. 2.0~204 gf |
| Measuring Head Width | 65mm |
| Optional Measuring Guide Roller Width | 7,10,15,20,30,40,50mm |
| Typical Measured Material | Over Thin , with, Width Thin Film, Wire |
| Accuracy | ±2% Full Scale (FS) |
| Display Update Rate | 0.5 s |
| Optional Unit | gf / cN / N / kgf / daN / LB(not Same Range switchable Unit not Same) |
| Display | 2.4 Full TFT Display |
| Display | Number digits Display / records + Number digits Display / Wire Diagram + Number digits Display, Display Screen can 90° Interval Rotatable |
| Memory Mode | A Mode 2Hz Rate Recording; B Mode Recording 100 pcs Data; C Mode 100Hz Rate Recording |
| Storable Values | Minimum, Minimum Peak, Average |
| Adjustable Range | Displayed Value can per by Full Scale 1% Width degrees ±10 Adjustment |
| Wire Speed | 1000 m/min |
| Yes No Package incl. Wire Diameter Compensation | No (Official website NTW Series Model Gauge ) |
| Optional Guide Roller Material | standard Hardness Aluminium Guide Roller; optional Wire Guide Roller UB, Coating Guide Roller TC, not Steel Guide Roller ST, Wire Speed 1000 m / minutes |
| Housing Dimensions | 76 × 46 × 275 mm |
| Power Supply | Rechargeable Battery, Continuous operation Approx. 10 hours |
| Operating Temperature | 10~45℃, 90% Relative Humidity or more |
| Standard Configuration List | Tension Instrument, Portable Type Instrument Gauge Case, Charger, in Text Manual, Pass / Fail |
| Application Range | with, etc. Width Width Material |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Pressure Range | Measuring head width | Selectable measure of width of the guide% | Typically measured material |
|---|---|---|---|---|
| NTW-200 | 2.0-200.0 cN | 65mm | 7,10,15,20,30,40,50mm | Super thin metal stubs, thin tape, narrow film, thin line |
| NTW-500 | 5.0-500.0 cN | 65mm | 7,10,15,20,30,40,50mm | Pale metal, copper aluminium, narrow tape, thin line |
| NTW-1000 | 10-1000 cN | 65mm | 7,10,15,20,30,40,50mm | Thicker metal, bandwidth, composites, flat wires |
| NTW-2000 | 20-2000 cN | 116mm | 7,10,15,20,30,40,50mm | Medium-banded steel belt, copper belt, knitted belt, zipper belt |
| NTW-2500 | 25-2500 cN | 116mm | 7,10,15,20,30,40,50mm | Medium-banded steel belt, alloy belt, industrial knitting |
| NTW-5000 | 50-5000 cN | 116mm | 7,10,15,20,30,40,50mm | Broadband steel band, steel curtain belt, heavy industrial belt |
| NTW-10K | 0.1-10.0 daN | 116mm | 7,10,15,20,30mm | Broadband steel band, steel line belt, heavy belt |
| NTW-20K-F | 0.2-20.0 daN | 216mm | 7,10,15,20,30mm | Broadband heavy steel belt, steel curtain wire, cable belt |
| NTW-30K-F | 0.3-30.0 daN | 216mm | 7,10,15,20,30mm | Heavy steel belt, pre-resistance steel strangulation tape |
| NTW-50K-F | 0.5-50.0 daN | 216mm | 7,10,15,20mm | Specially wide steel belt, heavy cable belt |
| NTW-60K-F | 0.6-60.0 daN | 216mm | 7,10,15,20mm | Specially wide steel belt, heavy cable belt |
| NTW-100K-F | 1.0-100.0 daN | 216mm | 7,10,15,20mm | Specially wide heavy steel belt, bridge cable belt, steel strangulation belt |
Q: What is the difference between the NTW series and the NT series?Seves
A: NT series for circular wire, copper wire, metal wire, NTW series for bandwidth material such as tape, metal thugs, measuring head widths 65mm, 116mm, 216mm in three stages, with a measurement guide of different widths of 7--ZX. Reference: 50mm
Q: What kind of width should be selected for NTW-200?
A: This model is optionally measured with a width of 7,10,15,20,30,40, 50mm, selected according to the actual width of the measured material, and the width of the tape shall be no less than the width of the tape to ensure that the tape is left intact in the working surface of the tape. The order is ordered with a width number after the model, such as NTW-10K-F-20 for 20mm..ScretsScopesScenessss
Q: Can the NTW series be able to decipher the radial lines? Q
A: No recommendation. The broad-scale head and width of the NTW series are designed for bandwidth material. The circular line material is selected for the NT series or other line item tension instrument to avoid the deviation of readings due to mismatches in the guidance slot type
Q: What is the accuracy of the measurements in the NTW series?
A: The official network parameter specification indicates the accuracy of 2% full mass (FS). if the field material does not match the plant's marking material, 2% ZQQQQQ The result fine-tuning function can be shown to be adjusted at the full range 1% 10 step without re-description
Q: What does the model F for the NTW series mean?
A:F is the order code for the saving handles. The network states that the 20 KG instrument is designed to be used for the standard configuration of the saving handles. The name of the NTW-20K-F and above is already in F; the small-scale mode may be noted at the time of ordering if it is necessary to save hands.Screaks. Reference: 100, KG
Q: How do you choose the NTW series?!?
A: Survey headlines (65 / 116 / 216mm) first determined by the width of the taped material, then the tension range was down
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.