Home › Products

Product Overview

BETTEN NTW-20K-F Tension Meters (Model NTW-20K-F) is a Tension Meters supplied by Guangzhou Yunke Electronics Co., Ltd. BETTEN NTW-20K-F Tension Meters — Tension Meters · Yunke Electronics. Request a quotation and datasheet.

Brand: BETTEN | Category: Tension Meters

Sales Inquiries: 15626018696 · 78403603@qq.com

BETTEN NTW-20K-F Tension Meters

Technical Specifications

ModelNTW-20K-F
SeriesBETTEN NTW Series with Material Tension Instrument
Series Positioning216mm Head Range
Tension Range0.2-20.0 daN
Tension Range (Conversion)2~200 N(Approx. 0.20~20.4 kgf)
Measuring Head Width216mm
Optional Measuring Guide Roller Width7,10,15,20,30mm
Typical Measured MaterialWidth Width Weight Type Steel with, Steel Wire with, Cable with Material
Accuracy±2% Full Scale (FS)
Display Update Rate0.5 s
Optional Unitgf / cN / N / kgf / daN / LB(not Same Range switchable Unit not Same)
Display2.4 Full TFT Display
DisplayNumber digits Display / records + Number digits Display / Wire Diagram + Number digits Display, Display Screen can 90° Interval Rotatable
Memory ModeA Mode 2Hz Rate Recording; B Mode Recording 100 pcs Data; C Mode 100Hz Rate Recording
Storable ValuesMinimum, Minimum Peak, Average
Adjustable RangeDisplayed Value can per by Full Scale 1% Width degrees ±10 Adjustment
Wire Speed1000 m/min
Yes No Package incl. Wire Diameter CompensationNo (Official website NTW Series Model Gauge )
Optional Guide Roller Materialstandard Hardness Aluminium Guide Roller; optional Wire Guide Roller UB, Coating Guide Roller TC, not Steel Guide Roller ST, Wire Speed 1000 m / minutes
Housing Dimensions76 × 46 × 275 mm
Power SupplyRechargeable Battery, Continuous operation Approx. 10 hours
Operating Temperature10~45℃, 90% Relative Humidity or more
Standard Configuration ListTension Instrument, Portable Type Instrument Gauge Case, Charger, in Text Manual, Pass / Fail
Application Rangewith, etc. Width Width Material

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


ModelPressure RangeMeasuring head widthSelectable measure of width of the guide%Typically measured material
NTW-2002.0-200.0 cN65mm7,10,15,20,30,40,50mmSuper thin metal stubs, thin tape, narrow film, thin line
NTW-5005.0-500.0 cN65mm7,10,15,20,30,40,50mmPale metal, copper aluminium, narrow tape, thin line
NTW-100010-1000 cN65mm7,10,15,20,30,40,50mmThicker metal, bandwidth, composites, flat wires
NTW-200020-2000 cN116mm7,10,15,20,30,40,50mmMedium-banded steel belt, copper belt, knitted belt, zipper belt
NTW-250025-2500 cN116mm7,10,15,20,30,40,50mmMedium-banded steel belt, alloy belt, industrial knitting
NTW-500050-5000 cN116mm7,10,15,20,30,40,50mmBroadband steel band, steel curtain belt, heavy industrial belt
NTW-10K0.1-10.0 daN116mm7,10,15,20,30mmBroadband steel band, steel line belt, heavy belt
NTW-20K-F0.2-20.0 daN216mm7,10,15,20,30mmBroadband heavy steel belt, steel curtain wire, cable belt
NTW-30K-F0.3-30.0 daN216mm7,10,15,20,30mmHeavy steel belt, pre-resistance steel strangulation tape
NTW-50K-F0.5-50.0 daN216mm7,10,15,20mmSpecially wide steel belt, heavy cable belt
NTW-60K-F0.6-60.0 daN216mm7,10,15,20mmSpecially wide steel belt, heavy cable belt
NTW-100K-F1.0-100.0 daN216mm7,10,15,20mmSpecially wide heavy steel belt, bridge cable belt, steel strangulation belt

Key Advantages

  1. Zero Auto Zero for any locationCharApplication of special sensor technology to achieve automatic zero-sum measurements of random locations and improved accuracy and efficiency of measurements
  2. Three displays.ScretsNumbers show / Trends Change Status bar + Number shows / Curve Chart + Numbers show, with reading accuracy and trend observations
  3. 0.2-20.0 DNN time positioningfirst entry process for 216mm, tension range 0.2-20.0 DN, first width for the measurement 216mm X-X-XN XS-X-X-X-X-StVS-Stream width for the first width of the fir
  4. Screen 90° rotationscreen displays are rotated at intervals of 90°, easy to observe measurements in different directions, and also fixed directions
  5. Capability structure.%lead frame and steering wheel structure, easily captured in operation, measured material, guided wheel, screen in the same plane
  6. Markable 10 materials.%1%2%22%2%2%more 10 materials can be marked and more accurate measurements of special materials
  7. Chinese-English operating systemMulti-unit options g, kg, cN, N, dNN, lb with Chinese and English operating systems
  8. Three memory patternsA mode 2Hz records, B mode records 100 data, C mode 100Hz records, all of which can be calculated for large, smaller, average, standard deviations and shown in curve charts
  9. Show value fine-tuning.ScreaksScAccurate values are shown without remarking when field material is slightly different from standard marking material
  10. Password Protection SettingsFunction settings can be protected by password to prevent field error of parameters
  11. Mark the handles of the power savingsModel F indicates a saver handle, with a network indicating that 20 KG to 100 KG instrument is standard configuration, with more energy-saving handles when measuring high tension instrument save hand handles standard configuration, with more energy-saving grips, with more energy-saving weight measurements, More stability

Applied industry & test project

  • Heavy steel beltLarge tension surveillance of the wires of the super-wide cold roll/hot roller steel belt
  • Cables and cablesbridge cable, weight-stamp steel belt test
  • Pre-resertive productsPre-resistance steel noose, anchor strip pressure test
  • HeavyweavingHeavy suspension belt, heavy tension measurement of industrial towed belt
  • Quality checks and feedLarge-scale production line tension process and plant review

FAQ

Q: What is the difference between the NTW series and the NT series?Seves 

A: NT series for circular wire, copper wire, metal wire, NTW series for bandwidth material such as tape, metal thugs, measuring head widths 65mm, 116mm, 216mm in three stages, with a measurement guide of different widths of 7--ZX. Reference: 50mm

Q: What kind of width should be selected for NTW-20K-F? 

A: This model is optionally measured with a width of 7,10,15,20, 30mm, selected according to the actual width of the measured material, and the width of the tape shall be no less than the width of the tape to ensure that the tape is left intact in the working surface of the tape. The order is ordered with a width number after the model, such as NTW-10K-F-20 for 20mm..ScretsScopesScenessss

Q: Can the NTW series be able to decipher the radial lines? Q 

A: No recommendation. The broad-scale head and width of the NTW series are designed for bandwidth material. The circular line material is selected for the NT series or other line item tension instrument to avoid the deviation of readings due to mismatches in the guidance slot type

Q: What is the accuracy of the measurements in the NTW series? 

A: The official network parameter specification indicates the accuracy of 2% full mass (FS). if the field material does not match the plant's marking material, 2% ZQQQQQ The result fine-tuning function can be shown to be adjusted at the full range 1% 10 step without re-description

Q: What does the model F for the NTW series mean? 

A:F is the order code for the saving handles. The network states that the 20 KG instrument is designed to be used for the standard configuration of the saving handles. The name of the NTW-20K-F and above is already in F; the small-scale mode may be noted at the time of ordering if it is necessary to save hands.Screaks. Reference: 100, KG

Q: How do you choose the NTW series?!? 

A: Survey headlines (65 / 116 / 216mm) first determined by the width of the taped material, then the tension range was down

  • 2.0 — 200.0CN NTW-200; 5.0 — 500.0cN NTW-500; 10 1000CN NTW-1000 (head of 65mm) NTW-1000
  • 20 — 2000CN NTW-2000; 25 — 2500cN NTW-2500; 50 5000CN NTW-5000 (head of 116mm) NTW-5000
  • 0.1 — 10.0DAN NTW-10K (head of 116mm) NTW-10K
  • 0.2 — 20.0DAN NTW-20K-F; 0.3 30.0DAN NTW-30K-F; 0.5 — 50.0DAN NTW-50K-F; 0.6 — 60.0DAN NTW-60K-F; 1.0 100.0DAN NTW-100K-F (head of 216mm) 4 (head of 216mm

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

BETTEN AST-500K Tension Meters
Tension Meters

BETTEN AST-500K Tension Meters

AST-500K
└ BETTEN Digital Tension Meters
BETTEN AST-400K Tension Meters
Tension Meters

BETTEN AST-400K Tension Meters

AST-400K
└ BETTEN Digital Tension Meters
BETTEN AST-300K Tension Meters
Tension Meters

BETTEN AST-300K Tension Meters

AST-300K
└ BETTEN Digital Tension Meters
BETTEN AST-200K Tension Meters
Tension Meters

BETTEN AST-200K Tension Meters

AST-200K
└ BETTEN Digital Tension Meters
BETTEN AST-100K Tension Meters
Tension Meters

BETTEN AST-100K Tension Meters

AST-100K
└ BETTEN Digital Tension Meters
BETTEN AST-60K Tension Meters
Tension Meters

BETTEN AST-60K Tension Meters

AST-60K
└ BETTEN Digital Tension Meters