Home › Products

Product Overview

BETTEN BTM-10K Tension Meters (Model BTM-10K) is a Tension Meters supplied by Guangzhou Yunke Electronics Co., Ltd. BETTEN BTM-10K Tension Meters — Tension Meters · Yunke Electronics. Request a quotation and datasheet.

Brand: BETTEN | Category: Tension Meters

Sales Inquiries: 15626018696 · 78403603@qq.com

BETTEN BTM-10K Tension Meters

Technical Specifications

ModelBTM-10K
SeriesBETTEN BTM Series Width Width Material Tension Meter
Series PositioningdaN Quantity class Over Model
Tension Range0.1-10.0 daN
Tension Range (Conversion)1~100 N(Approx. 0.10~10.2 kgf)
Typical Measured MaterialWeight Type , Width Width , Paper
Model Gauge Port0.1-10.0daN/CM
Accuracy±2% Full Scale (FS)
Display Update Rate0.5 s
Optional Unitgf / cN / N / kgf / daN / LB(not Same Range switchable Unit not Same)
Displaypoints Type Display (Backlight LCD, Provided two Type not Same Display Interface)
Adjustable RangeDisplayed Value can by per by Measured values 1% Width degrees ±10 Adjustment
Wire Speed1000 m/min
Storable ValuesMinimum, Minimum Peak, Average
Data outputoptional Wireless WIFI Output, with Wire Connection Number digits Output
Housing Dimensions393 × 146 × 78 mm
Power SupplyRechargeable Battery, Continuous operation Approx. 10 hours
Operating Temperature0~45℃, 90% Relative Humidity or more
Standard Configuration ListTension Instrument, Portable Type Instrument Gauge Case, Charger, in Text Manual, Pass / Fail
Application RangeNo , , etc. each Type Width Width Material Tension Measurement

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


ModelPressure RangeConversionSet PositionTypically measured material
BTM-5005.0-500.0 cNAbout 5.1 — 510 gfA small amount of the BTM seriesTwilight, thin, thin curtains, thin net
BTM-100010-1000 cNAbout 10.2 — 1020 gf (approximately 1.02 kgf)Small-scale GenericCl0CGeneral unwieldy, curtains, thin carbon fibre sheeting
BTM-200020-2000 cNAbout 0.20 — 2.04 kgfMedium-range main force modelCharlieRegular curtain sheet, carbon fibre sheet, industrial netted
BTM-500050-5000 cNAbout 0.51 — 5.10 kgfIt's a lot of timeHeavy curtain sheet, carbon fibre sheet, paper dry net
BTM-10K0.1-10.0 daN1 — 100 N (approximately 0.10 — 10.2 kgf)DNN Quantum Transition ModelHeavy curtain sheet, wide-band carbon fibre sheet, paper blanket
BTM-20K0.2-20.0 daN2 — 200 N (approximately 0.20 — 20.4 kgf)The most extensive of the BTM seriesSuper-wide heavy curtain sheeting, industrial blankets, heavy carbon fibre fabrics

Key Advantages

  1. Aluminium roller bearing wheelAAluminium-based measurement wheels with roller bearings, measurable materials in motion
  2. Solid-sliding shellSolid, skating aluminium casings, resistant to electromagnetic interference
  3. 0.1-10.0 DNN time positioningdAN Quantities Transition Model, tension range 0.1-10.0 DNN (1 ~ 100 N (approximately 0.10 10.2 kgf) For heavy curtains, wide carbon fibre sheets, paper blankets
  4. Same plane designtested material, guided wheel, screen in the same plane, tested data, guided wheel and measured material state to the bottom of the eye
  5. Markable 10 materials.%1%2%22%2%2%maximum of 10 materials can be marked and more accurate measurements of special materials
  6. Full Character MenuFull Character Menu Settings function, simple and easy to operate; Chinese and English are optional
  7. Multiunit Switchthe measurement values show the choice of units g, kg, cN, N, dNN, lb according to different scales and needs
  8. Records and storagemaximum, minimum, peak, average values can be recorded during measurement, and 199 stand-alone measurements can be stored in memory
  9. Programmable Trends Status Barclear determination of the extent of tension changes and mechanical instrument trends showing advantages
  10. Show value fine-tuning.ScreaksScAccurate values are shown without remarking when field material is slightly different from standard marking material
  11. Password Protection Settingsthe functionality settings can be protected by passwords to enhance their security.%1%2%2
  12. Two displays_222222advantages of balancing electro-tension reading accuracy with mechanical tension control trend; backlight LCD provides two different display interfaces
  13. Long-durationLIPO lithium ion polymer battery, running on a sustainable basis approximately 10 hours : :Lithium ion polymer cell, running on a sustainable basis XQ

Applied industry & test project

  • No-rolling industryCrewstension monitoring of sections of the spinning, melting, water-stamped non-wiring production line
  • Curtains and tyresTires covered with glue, pressure, and pressure test of the roll process
  • Carbon fibre compositesCultlaying of carbon fibre sheeting, pre-breeding, multiaxis to fabrics and roll pressure control.Closures
  • Papernets and blanketspressure measurement of paper-forming nets, dry nets, pressurized blankets
  • Membrane and DivisionBroadband film roll, split, paper-record commocity test
  • Quality checks and feedreview of the broad banding of material for sampling and stress indicators

FAQ

Q: Why do the cN, the cN/CM of the BTM series have a process of cN? 

A: The official network BTM table labels the scale of the broad banding material as cN/CM (monized by width per centimetre) This scale 0.1-10.0 DN takes the SKU icons (without /CM). Both are written by the same instrument according to different calibres, The selection is based on the actual material width and on-site process requirements, details of which may be consulted by telephone

Q: What is the difference between the BTM series and the NTW series?Seves 

A: Both are directed towards broad-banded materials, but are located differently. The NTW series applies to narrow banding materials such as metallic thumps, tape, and so on, with a width less than 50mm. The head width of the measurements is 65 / 116 / 216mm in three stages; the BTM series is for non-width, curtain, carbon fibre ** material large.Asssembles Symblers Symmetrical Standards Standards Stands Stamps Standards St The shell size 393 x 146 x 78mm with a greater horizontal span

Q: How do you choose the BTM series?!? 

A: Based on the actual tension of the measured material, it is recommended that the actual tension should fall to the full range of 20%~80%

  • Thin unwieldy / Light curtains BTM-500 (5.0-500.0cN) (Z
  • General non-rotation sheet / thin carbon fibre sheet BTM-1000 (10-1000cN) (10
  • General curtain sheet / carbon fibre sheet / Industrial web sheet BTM-2000 (20-2000cN) (20-2000
  • Heavy curtain sheet / multilayer carbon fibre sheet / paper dry net BTM-5000 (50-5000cN) (50-5000CN)s
  • Heavy curtain sheet / Wide-band carbon fibre sheet / Paper blanket BTM-10K (0.1-10.0DAN) (0.1-10.0DAN)
  • Super-wide heavy curtain sheet / Industrial blanket BTM-20K (0.2-20.0DAN)

Q: Can measurements be recorded?? 

A: Yes. The instrument records the maximum, minimum, peak, average values of the measurement process, and also memory the separate 199 measurements; Data output is selected for wireless WIFI output or cable connection digital output, which allows for quality recording and traceability

Q: What if the field material is not consistent with the plant marking? 

A: The instrument can be marked with a maximum of 10 material; if it is only a minor deviation, the result fine-tuning function can be shown, adjusted 10 step by the range of the measured value 1%,Stamps of material, and then the 10 step by step, of the instrument, of the instrument, of the instrument, of the instrument, of the material, of the material, of the instrument, of the The exact value is not remarked.!

Q: Can the BTM series detect circular line material? 

A: Not suitable. BTM series is designed for broad banding materials such as no spinning, curtains, carbon fibre sheets, and round wires are selected for NT series or other line item tension instruments. Q1 series or other liner tension instruments

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

BETTEN AST-500K Tension Meters
Tension Meters

BETTEN AST-500K Tension Meters

AST-500K
└ BETTEN Digital Tension Meters
BETTEN AST-400K Tension Meters
Tension Meters

BETTEN AST-400K Tension Meters

AST-400K
└ BETTEN Digital Tension Meters
BETTEN AST-300K Tension Meters
Tension Meters

BETTEN AST-300K Tension Meters

AST-300K
└ BETTEN Digital Tension Meters
BETTEN AST-200K Tension Meters
Tension Meters

BETTEN AST-200K Tension Meters

AST-200K
└ BETTEN Digital Tension Meters
BETTEN AST-100K Tension Meters
Tension Meters

BETTEN AST-100K Tension Meters

AST-100K
└ BETTEN Digital Tension Meters
BETTEN AST-60K Tension Meters
Tension Meters

BETTEN AST-60K Tension Meters

AST-60K
└ BETTEN Digital Tension Meters