TECLOCK GS-615 Durometer Test Stand (Model GS-615) is a Hardness Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TECLOCK GS-615 manual durometer test stand (cam type), 30 mm stroke, 3.9 kg, centring unit, for A/B/E/D and Asker C durometers.
Brand: TECLOCK | Category: Hardness Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | GS-615 |
|---|---|
| Type | Manual Type Hardness Testers pcs Stand ( Type Cam Type) |
| Drive Method | (Cam) Type —— Use Property and Property than |
| Stroke | 30mm |
| Applicable Hardness Testers Type | A, B, E, A, Type C(Asker C), O / D, ASTM C, DO, JIS C |
| Standard Auxiliary Weight | 1kg Use Weight ZY-089 |
| Optional Weight | 5kg Use Weight ZY-128(Type D Measurement requires); Number digits Type GSD requires 1kg Use Weight ZY-079 |
| Matching Single | to in Single Element |
| Calibration Part | can Calibration Class (Operation Speed not can) |
| Mass | 3.9kg |
| Origin | Japan Control (MADE IN JAPAN) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The TECLOCK GS-615 is a manual durometer test stand (cam type) — a stand for a hardness tester, not a durometer itself. The durometer shown in product photographs is a separately sold option: a GS- / GSD- series instrument must be chosen to suit the material and mounted on the stand. A cam mechanism drives the indenter down, giving simple operation at a lower cost than a motorised stand. Stroke 30 mm, mass 3.9 kg, made in Japan.
With hand-held measurement, pressing force, angle and holding time vary from operator to operator and readings scatter widely. Mounting the durometer on a stand built to JIS / ISO requirements applies the specified load at a controlled descent, removing the human variable and markedly improving stability and reproducibility. The centring unit fitted to this stand moves freely front-to-back and left-to-right so the presser foot seats flat against the specimen, avoiding errors from off-axis loading. The same unit is used on GX-02, GS-610II, GS-612 and GS-615.
Rubber products, plastics and engineering plastics, polyurethane and foam, footwear materials, tyres and rubber rollers, automotive parts, building materials, universities and third-party testing laboratories, and metrology / calibration labs. Typical tests cover Shore and international rubber hardness, plastics hardness, soft foam hardness, block material hardness, incoming and outgoing inspection, and reproducibility comparisons between instruments.
Is this a durometer, and can it measure hardness on its own? No. This page is the stand only. The durometer in the photographs is an optional accessory and must be ordered separately (GS- / GSD- series) and fitted to the stand, which supplies the JIS / ISO specified load and a stable descent.
Which of the four stands should I choose? GS-610 is the basic manual model; GS-612 adds a speed controller; GS-615 is the simple, economical cam type; GX-610II is the automatic model whose adjustable descent suits standards and materials that specify a loading speed.
Are calibration certificates available? GS-610, GS-612 and GX-610II can be issued with certificates to ISO / JIS requirements (including the durometer); the GS-615 can be issued with calibration documentation but not with proof of operating speed. Confirm the exact scope and procedure with the manufacturer or distributor; no official calibration interval is stated on this page.
Are the photographs official? Yes. All images on this page come from the public product gallery and official catalogue at teclock.co.jp, standardised on a white background and watermarked without substituting a different product.
TECLOCK is a Japanese manufacturer of durometers for soft materials, producing rubber and plastics hardness testers since the 1950s. Its ranges are organised around JIS K 6253, JIS K 7215, JIS K 7312, JIS S 6050, JIS K 6301, ASTM D 2240 and ISO 7619 / ISO 868. All figures above are transcribed from official TECLOCK documentation without conversion or inferred values. This is a quotation-only catalogue; no prices are listed.
For stand and durometer pairing advice, a quotation, lead time or an English datasheet, please contact our engineers.