Home › Products

Product Overview

TECLOCK GX-610II Hardness Testers (Model GX-610II) is a Hardness Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TECLOCK GX-610II Hardness Testers — Hardness Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: TECLOCK | Category: Hardness Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

TECLOCK GX-610II Hardness Testers

Technical Specifications

ModelGX-610Ⅱ
NameDurometer Stand with VFD Touch Panel
TypeVFD Surface Plate Type Hardness Testers Automatic pcs Stand
Lower Speed1.0 ~ 20.0mm / sec(can per 0.1mm / sec Setting)
Drive MethodElectric Unit (Stepping Motor), can Setting under Speed
Surface PlateElectric Capacitance Type —— or sets can Response
Display Part Degree Adjustment1 ~ 8 Range Adjustable
Sensitivity AdjustmentHi / Lo two Range Adjustable
Settingwith / No can Setting
Massto in Single Element Mass 346g(incl. Spring Load); Standard Weight (ZY-089)487.5g
Applicable Hardness Testers Type (Analog Type)A, B, E, A, Type C(Asker C), O
Applicable Hardness Testers Type (Number Digit Type)D, ASTM C, DO, JIS C
Weight ConfigurationAnalog Type 1kg Use ZY-089(Auxiliary)/ Number digits Type 1kg Use ZY-090(optional)/5kg Use ZY-128(optional)
Matching Singleto in Single Element —— plus Surface and Test Sample Measurement Surface Property Good
Current1.0A or less
Power SupplyInput AC100~240V / Adapter Output (Body Input)DC24V
DimensionsW180(excluding SW )× L276(excluding Connection Device )× H400(to Terminal)mm
MassBody 11.4kg / Power Supply 0.2kg
Calibration Partcan Calibration
OriginJapan Control (MADE IN JAPAN)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Comparison of model with series

ModelOfficial classification
GX-610IIVFD Tactical Panel Hardness Manipulator
GS-610Manual hard-meter staircase (supplier JIS / ISO)
GS-612Manual hard-meter staircase (speed controller)
GS-615Manual hard-meter staircase (cam)

Key Advantages

  1. Remove the pressure from the person and improve the re-emergenceWhen measured by hand pressure, angle, and time of retention, the reading is very wide and the pressure varies by person. load the hard scale on the frame specified in JIS/ ISO, and the frame is applied the specified weight. : pressure, angle and time of retention, the load of which is very high. The conditions of the determination are uniform and the stability of readings and re-recurrences are significantly improved
  2. Guaranteed confidentiality for medium units.%%%%%%%%%%%%%the staircase is mounted on a medium unit, which can move freely around and around the front, so that the hard gauge presses are added to the surface with a high degree of cavity to the sample size, and the reading deviations caused by the bias are avoided. The unit is also used for GX-02,, and the test size of the test. :rv : : : : : : : : : : : GS-610II, GS-612, GS-615
  3. The hammer can be replaced by hardscale typeType A and E hardometers can be measured directly by standard 1kg hammer; Type D needs to be matched by 5kg with hammer ZY-128; A digital GSD series requiring 1kg with hammer (GS-610 / GS-615 for ZY-090 and GS-612 for ZY-079) he number is different from the simulation hammer code, and be careful to distinguish when ordering
  4. Issuance of measurement documentsCreasesGS-610 / GS-612 / GX-610II may issue correction certificates (with hard meters) that meet the required quality of ISO / JIS / GX / GX- XQII / JIS / / JIS / / It is easy for laboratories to establish meta-retroactivity with third-party testing agencies; GS-615 can issue correction books, but the speed of operation cannot be demonstrated.?
  5. Operation selected as required.%1lowest cost of pure hand pressure (GS-610); adjustable down speed of speed of speed controller (GS-612); simple operation of GS-615 and high value for money; VFD touch control automatic (GX-610II) speeds can be set at 0.1mm/sec step by step, driven by a propulsor, which is best repeated
  6. Hardness set for sale, as requiredThis page is a scaffolding home, and the hard meter (GS-/GSD- series) is a separate sale of spare parts, which can be freely matched to the type of material measured

Applied industry & test project

FAQ

Q: Is this a hard meter or a staircase? Can you get it back to take a hardness test?

A: This page is a product ofHardness metering staircase (stage)not a hard-meter homepage. The hard-scale in the picture is.SystemsAlternative partsthe GS-/GSD- series of hardometers will be purchased for use on the setters by type of material measured._ The support frame is designed to provide the weight and steady drop action specified in JIS/ISO

Q: Why do you have to use a staircase, with your hand on it?

A: When measured by hand pressure, the time held by pressure, by pressure angle and by pressure, varies from person to person, and these factors directly affect readings, leading to the separation of the measurements and poor re-realization. The official product of the test stand specified in JIS/ISO - the frame is applied at a specified weight, pressure is applied at a uniform rate, human factors are excluded and stable and retroactive measurements are obtained. If used for standardized testing or measurement retroactive, the use of a support frame is recommended.!

Q: How many of the rack models are selected?!

A: Distinguishing as requiredGS-610manual, basic, least costlyGS-612Manual plusSpw_wSpeed controlleradjustable to the down speed to determine the maximum possible high-level digital 30mm/ analogue 55mm mass 8.5kgGS-615:Cam_BAR__Treaties_Functsimple operation, high value for money, process 30mm, mass 3.9kgGX-610ⅡVFD Touch Panel_Telephone_Technology_TechAutothe down speed 1.0 — 20.0mm/sec can be set at 0.1mm/sec step by step, step-in motor driven, best repeater

Q: Do you need another hammer?

A: Depends on the hard scale type○ A, E(b) The hardness meter can be measured directly by a standard subsidiary 1kg hammerType DThe hardness meter needs to be extra 5kg with a hammerZY-128;Digital GSD SeriesA separate 1kg with hammer - GS-610/ GS-615SpwxZY-090GS-612 forSpunners%ZY-079The number pattern is different from the simulator's hammer code. Please specify the hardmeter type to be used for ordering

Q: Why should the rate of decline of GX-610II be adjusted?

A: Different standards differ from the requirements for loading speeds for different materials, and "operational speed" is itself one of the important variables affecting hard-reading rubber. GX-610II uses a step-by-step motor drive, and the speed of operation is a major variable for the hard reading of rubber. : speed of loads is different from the different materials, and the "operation speed" is one of the key variables affecting the hard reading of rubber. XQ Speeds can be set at 0.1mm/sec step by step in the range of 1.0 — 20.0mm/sec and can therefore be measured at the rate agreed by the standard requirements or supply and demand, in different batches, / sec (c) The determination of consistency between different equipment.?

Q: Can you provide a proof of correction?

A: GS-610, GS-612, GX-610II may issue correction certificates (with hard meters) that meet the required quality of ISO/ JIS; ; Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. Q. GS-615 may issue correction classes, butThe speed of the operation cannot be demonstratedThis page does not include an official calibration cycle.The scope and procedures for distribution are confirmed by the official or agent

Q: Will the staircases be accompanied by a hard scale?

A: No. —The hardness of the photograph is calculated as an alternative to the sale of the accessories.!Please contact our engineers for the full technical wording of this item.Guangzhou Yunke Electronics Co., Ltd.A set of staircases and hard meters can be provided, and call advice is welcome.!!

Q: Is the product picture the official original?

A: Yes. This page is taken from the official website of TECLOCK, which has a product map and an official directory (teclock.co.jp), which is standardized with the official original white base and watermarked without replacing it with a crowned plume._Big_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black_Black

Official Positioning Note: TECLOCK TECLOCK VFD Tactile Panel Automatic Hardness Manipulation (ABS) supports TECLOCK (TECLOCK) VFD Tactile Hardness Manipulation (TECLOCK) supports,, and then the TPNs are designed to provide a complete picture of the impact of the current situation.sss QPKS This is a VFD touch panel hardometer set with a step-by-step power drive, The rate of decline can be set at 0.1mm/sec step by step in the 1.0 — 20.0mm/sec range, in conjunction with the medium unit ensuring the presses are added and the face is well-defined with the specimen. A, E hardometers can be measured directly by standard 1kg hammer; Type D needs to be selected with 5kg with hammer ZY-128; The digital GSD series is to be matched with 1kg with a hammer ZY-090. The hardness in the photograph is to be sold separately. TECLOCK (TECLOCK) is a comprehensive manufacturer of the Japanese flexible hardness gauge (JSMS) and has been producing rubber plastic hardometers (Durom) since the 1950 years. The product lines are divided by the criteria JIS K 6253, JIS K 7215, JIS K 7312, JIS S 6050, JIS K 6301, ASTM D 2240, ISO 7619/ISO 868, etc. , JIS K 7215, JIS K 7312, JIS S 6050, ASTM D 2240, ISO 7619, ISO 868 Covers all hard areas from super-soft bubbles to hard plastics

Option hint: This page is a hard-metered staircase, and the hard-scale in the photograph is for the sale of additional accessories, which are to be used as a package for the GS-/GSD series of hard-meters, selected for the type of material being measured. -Ticker-TextStampStGuangzhou Yunke Electronics Co., Ltd.TECLOCK supply of hard-metered staircases and hard-meters, and caller advice options and packages are welcome

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

TECLOCK GS-753G Hardness Testers
Hardness Testers

TECLOCK GS-753G Hardness Testers

GS-753G
└ TECLOCK (Japan)
TECLOCK GS-752G Hardness Testers
Hardness Testers

TECLOCK GS-752G Hardness Testers

GS-752G
└ TECLOCK (Japan)
TECLOCK GS-751G Hardness Testers
Hardness Testers

TECLOCK GS-751G Hardness Testers

GS-751G
└ TECLOCK (Japan)
TECLOCK GS-721N Hardness Testers
Hardness Testers

TECLOCK GS-721N Hardness Testers

GS-721N
└ TECLOCK (Japan)
TECLOCK GS-720R Hardness Testers
Hardness Testers

TECLOCK GS-720R Hardness Testers

GS-720R
└ TECLOCK (Japan)
TECLOCK GS-720N Hardness Testers
Hardness Testers

TECLOCK GS-720N Hardness Testers

GS-720N
└ TECLOCK (Japan)