IMADA FB-50N Force Gauges (Model FB-50N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. IMADA FB-50N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: IMADA | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FB-50N |
|---|---|
| Product Name | IMADA.FB-50N Type Mechanical Pointer Force Gauges |
| Series | IMADA FB / FS Series (Economical Type Mechanical Force Gauge, Type Mechanical Pointer Force Gauges) |
| Official Model Classification | FB(N Unit / lbf Unit Unit Type) |
| Measurement Type | Force (Tension) and Pressure Force (Compression) Dual toward Measurement |
| Rated Capacity | 50N |
| Scale Resolution | 0.5N |
| Indication Accuracy | ±0.3% F.S. or less (Full Series total General) |
| Number of Graduations | 100 Wire (30N / 300N / 3K / 30K / 30lb etc. Model is 120 Wire) |
| Movement Stroke | 10mm |
| Reading Method | Real-time Value / Peak Hold (Body Peak Open Switching) |
| Measuring Spindle Thread | M6( Force Terminal and Pressure Terminal is M6) |
| Zero Adjustment Method | Dial external Revolution Zero Adjustment Ring (Tare ring) Zero Setting |
| Power Supply | No requires Power Supply ( Mechanical Spring Structure, not Operating Battery) |
| Dimensions | Official Drawing (Dimension): Total Length Approx. 232.5mm, Width Approx. 67mm, Height Approx. 48mm |
| Body Weight | FB Type Approx. 630g / FS Type Approx. 580g(Official Weight with Range not Same with Difference ) |
| Operating Environment | Temperature 0~+40℃(Official Operating environment) |
| Standard accessories | 6 pcs Accessories (A-1~A-6(Aluminium Control))+ Operating Instructions + Portable Case + Check Pass / Fail etc. |
| Accessories Material Then | Capacity 100N and below with Aluminium Control Accessories (A Type); 200N~1000N with Steel Control Accessories (S Type) |
| Sales Region Notes | Official Standard Unit Type, Japan internal and Chinese Mainland can Normal Sales. |
| Origin | Japan Control (MADE IN JAPAN) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Rated capacity | Tic resolution_Other | Standard Accessories |
|---|---|---|---|
| FB-10N | 10N | 0.1N | A-1 to A-6 (aluminium) |
| FB-20N | 20N | 0.2N | A-1 to A-6 (aluminium) |
| FB-30N | 30N | 0.25N | A-1 to A-6 (aluminium) |
| FB-50N | 50N | 0.5N | A-1 to A-6 (aluminium) |
| FB-100N | 100N | 1N | A-1 to A-6 (aluminium) |
| FB-200N | 200N | 2N | S-1 to S-6 (steel) |
| FB-300N | 300N | 2.5N | S-1 to S-6 (steel) |
| FB-500N | 500N | 5N | S-1 to S-6 (steel) |
| FS-1K | 1kgf | 10gf | A-1 to A-6 (aluminium) |
| FS-2K | 2kgf | 20gf | A-1 to A-6 (aluminium) |
| FS-3K | 3kgf | 25gf | A-1 to A-6 (aluminium) |
| FB-5K | 5kgf | 50gf | A-1 to A-6 (aluminium) |
| FB-10K | 10kgf | 100gf | A-1 to A-6 (aluminium) |
| FB-20K | 20kgf | 200gf | S-1 to S-6 (steel) |
| FB-30K | 30kgf | 250gf | S-1 to S-6 (steel) |
| FB-50K | 50kgf | 500gf | S-1 to S-6 (steel) |
| FB-5lb | 5lbf | 0.05lbf | A-1 to A-6 (aluminium) |
| FB-10lb | 10lbf | 0.1lbf | A-1 to A-6 (aluminium) |
| FB-20lb | 20lbf | 0.2lbf | A-1 to A-6 (aluminium) |
| FB-30lb | 30lbf | 0.25lbf | S-1 to S-6 (steel) |
| FB-50lb | 50lbf | 0.5lbf | S-1 to S-6 (steel) |
| FB-100lb | 100lbf | 1lbf | S-1 to S-6 (steel) |
| Annex Model | Name_Other Organiser_Other Organiser_Other Organiser | Use |
|---|---|---|
| A-1(S-1) | Hampton.323233333333333333333 | The most commonly used attachments to pull measurements, the attached specimens or the ropes |
| A-2(S-2) | Flathead = = = = = = = = = = = = = = = = = = = = = = | A flat-level interview model with a puncture and a compact test of plate size and block size |
| A-3(S-3) | Conuary | Advanced exposure, suitable for small areas or for positioning compressors |
| A-4(S-4) | Crawled headChalely4Charlie | Line contact, narrow, borderline pressure |
| A-5(S-5) | Gap Notice04 | The hole can hold the cylinder sample to prevent slides when pressurized |
| A-6(S-6) | Extension Axis | Longer poles to extend the point to deep holes, grits or narrow spaces |
| Scale Unit | Reciprocal model | Note |
|---|---|---|
| N unit (commonly used in mainland China) | FB-10N / FB-20N / FB-30N / FB-50N / FB-100N / FB-200N / FB-300N / FB-500N | General industrial force detection, selected by test strength down to rated capacity 20%80%SecureScret |
| kgf unit (international model) | FS-1K / FS-2K / FS-3K / FB-5K / FB-10K / FB-20K / FB-30K / FB-50K | Used to record the production lines of data with foreign trade customers in kgf |
| lbf unit (international model) | FB-5lb / FB-10lb / FB-20lb / FB-30lb / FB-50lb / FB-100lb | Test records for British standards or exports to North America |
Q: What is the difference between the FB/FS series and the PS/PSS series?
A: The same is a IMADA mechanical pointer puller (no power, peaks and press-zero), with the main differences in accuracy and positioningFB/FS SeriesEconomics for official position, indicator of accuracy0.3%F.S. %Fwith a mass of approximately 630g (type FS) and a mass cover of 10N — 500N;. Reference: 580gPS/PSS SeriesStandard high accuracy, accuracy%0.1%F.Swith a total of approximately 580 — 670g and a labeled 8 attachment. The option FB/FS is available for general spot checks, multi-point configurations or limited budgets; precise readings are required, PS/PSS should be selected for the occasion for which the standard testing data is to be produced
Q: What's the difference between FB and FS?
A: The difference is only betweenScale UnitandBody Weightthe mechanical structure and function are identical:!Specifications: FB. Please contact our engineers for the full technical wording.For the N (10N — 500N) and lbf (5lbf — 100lbf) aircraft, the size of the aircraft is approximately 630gSpecifications: FS. Please contact our engineers for the full technical wording.The number of aircraft (officially known as ) is the unit type of the kgf (1kgf-3kgf) and its size is approximately 580g.?The international model is not allowed to be sold domestically in Japan because of Japanese measurementbut you can export normally. Chinese customers are allowed to purchase it in the units they need
Q: Do you need power for this device?
A: No need. — — — — — — — — — — —A purely mechanical spring structure, without batteries or outside powerThe site is used by the local authorities, and the local authorities are not allowed to use the Internet to sell the Internet. and the Internet are also used by the local authorities.?Atttendances of the Internet, and the Internet. There is no problem of power consumption or charging waiting and is suitable for frequent movement, multi-point sampling and outdoor use.?
Q: How do you keep peaks?!?
A: There is a peak switch on the side of the aircraft (peaksepa). Test when you reach the peak and the pointer stops during the test.Amaximum force valueUp, the pointer does not fall when the force value declines; reading the record before the switch is turned on will clear the peak and return to the real-time reading state.!! The official statement states that the switch is used for "/ponicotal lan" (opening or clearing peaks to keep reading).!
Q: How do you change the readings to zero?!
A: On the outside of the boardSundry (TareAd)With a small hook and so on, the attached self-regulating allows the pointer to deviate from zero points; the spin-noring ring can be re-aligned to 0. Similarly, when the instrument is changed from hand-held to hand-held or manual test stand, The change in the installation posture also causes zero deviations, which are also corrected by the T-0 ring. The official statement is that it's called "delete theay" for "delete theay" for "good-good-sea.".!
Q: What difference does it make with an attachment of the 100N and 200N aircraft?
A: Officially differentiated Annex material by volume:!Aluminium-type attachments (type A) with capacity 100N and belowModel A-1 — A-6 (tong, flat, cone, chisel, gaphead, extended axis)Type of steel attachment (S) with a capacity of 200N ~ 1000Nmodel S-1 — S-6, the size of the specification corresponds to type A, but the material is harder to withstand a larger load. The attachments are both installed with the same shape as M6
Q: What are the occasions when it is not suitable for use?!?
A: Officially clear two points: :!It's not a destructive experiment with a big impactand is not suitable for testing in a continuous vibration environment, because it is internal to a spring structure;2 it must not be exceeded by a rated capacity or applied from the wrong direction to the measurement axis. Moreover, it should not be subject to extreme temperature changes, high temperature and humidity, Use in near water or dust environment. When there is a need for shock tolerance or high duplication, it is recommended to switch to a digital feature (e.g., the DSV / ZTS series). Qatar / / ZTS series
Q: Can you use a test stand or handle?
A: Yes. Officially, two methods of increasing the stability of measurements are listedCapable handle FOH-1Spunners/Spunto facilitate steady holding and exertion; or to installSlider belt HGB-1Screaksprevent the instrument from sliding during handheld tests;2 load to manual test stands, officially recommended for manual manual test stations.Apprograms for manual testsSVL-1000N(leveraging, efficient) withSVH-1000N(carrying wheels, more stable force) Co-opting the racks can significantly increase the measurement of duplication
Q: Can you provide a calibration certificate? Q: Can
A: Yes. OfficiallyChart of calibration certificates and traceabilitys for feesThis page does not include official calibration cycles and fees. : 2005. Reference: IEC 17025, ISO
IMADA (Japanese sign IMADA, English CO., LTD.) is based in Toonbridge, Aichi County, Japan. Quest Qu Qu Qu Tsa A professional manufacturer of the FORCE MEAOTAOTEQ (FORCEEAOTAIDE) measurements. The official defines the FB/FS series as "" Qualify for the "FB/FS" series. Reference: IMADAEconomical Type Mechanical Force GaugeThe blogger says that the government is not going to be able to use the tools to control the situation.! The adverb is "The narration of amenies" - you can measure peaks at peaks, and use the T-0 ring to reduce the weight of attachments,A-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H It is strong and non-power-intensive. It is associated with the higher accuracy PS/PSS series (0.1%F.S.), the finer PSM series,Screen,Screen, and the more accurate 0.1 series.Sp.Sp.S.S.S.S.S.S.S.S.S.S.S.SSSS The high-capacity PSH series is a product line for the IMADA mechanical drouds.Access to the Quest The official recommended simple force values such as "Measuremental – — are used to measure the scene.!
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.