Home › Products

Product Overview

HIOS HP-1 Torque Testers (Model HP-1) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. HIOS HP-1 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: HIOS | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

HIOS HP-1 Torque Testers

Technical Specifications

ModelHP-1
BrandHIOS(JapanHIOS)
SeriesHP Series (units Type a Body Type Number digits Torque Meter)
Official ApplicationUse at Motorised Screw Blade Torque Setting, Torque Screw Blade and Torque Wrench etc. Check and each Type Rotatable Body Torque Management Management.
Peak Measuring Range (Lbf · in)0.015-0.9
Official Applicable TorqueOfficial Description HP-1 Applicable at 10 N · cm or less Micro Small Torque Measurement
Range Unit DescriptionOfficial Specifications Gauge This Model only Series lbf · in Range, not Series N · m Range
Accuracy±0.5% or less (F.S.)
Measurement modeTRACK( with) / PEAK(Peak) / FIRST PEAK(No. a Peak)
Measuring Directionwhen Needle, when Needle can Measurement
Data outputStandard Configuration Tool Data Output and Analog Output
Datacan will Measurement Data Guide Electric Processing
Data Storageup to Memory 100 groups Measurement Data (Official Applicable at HP and HDP Series)
Statistical Functionsa units Instrument can Accuracy Maximum (Max), Minimum (Min) and Average (Ave)(Official Applicable at HP and HDP Series)
Dimensions230 × 124 × 65.2(H)mm
Weight1.8 kg
Battery Set (Charging Time)1.2V NiMH Battery × 5 cells, 1000mA(6 hours or less)
Full Electric Continuous Operating Time8 hours
Battery LifeApprox. Charging 300 times
Dedicated ChargerInput AC 100-240V(50 / 60Hz)/ Output DC 7.3-8V 0.5A
Supplied PartFull Unit Type Included Check

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

HIOS Trail meter full 10 comparison (official series)Strenchment

SeriesModelStructure / Official PositionPeak measure rangeSpunners
HPHP-1Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations0.015-0.9 lbf·in
HPHP-10Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations0.015-1.000 N·m
HPHP-100Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations0.15-10.00 N·m
HDPHDP-5The spin torque used to measure the screws that have been stung, and the extra tight torque..Streaks0.015-0.5 N·m
HDPHDP-50The spin torque used to measure the screws that have been stung, and the extra tight torque..Streaks0.15-5 N·m (HDP-50X to 10 N·m)
HMHM-10Torque management for self-motivated use of electric screwdrivers0.015-1 N·m
HMHM-100Torque management for self-motivated use of electric screwdrivers0.15-10 N·m
HITHIT-200Torque management for shock electric screws and torque wrench0.15-18 N·m
HITHIT-500Torque management for shock electric screws and torque wrench1.5-50 N·m
HITHIT-2000Torque management for shock electric screws and torque wrench25-180 N·m

Key Advantages

  1. The measurement threshold is lower than 0.015 lbf in, officially positioned as a micro-tangled measuring machine at 10 N cm to fill the small quantum slot below HP-10
  2. A single desktop structure, with a measuring seat on the body, is suitable for fixed working positions for electro-dynamic screw torque setting and point checking
  3. The TRACK / PEAK / FIRST PEAK is switched to a three-modal shift that can see real-time torque and lock peaks
  4. The 100 group measurements can be stored and the maximum, minimum and average values read directly by one instrument.ScretsScreaksSc
  5. The double-directional view of the counterclockwise is detectable and the left spiral is as relevant as the reverse spin torque
  6. Standard configuration is a data output and simulation output that allows the recorder or data-collection device to be used..Scret-recordsScrets.Screts
  7. The full-scale accompanying performance check-ups will facilitate the filing and client clearance of quality systems

Applied trade & test object

The subjects of the tests included electric screws (including self-motivated and shock), tox screws, preset and digital torque wrench, air-lifters, and the review of the stun and torque-towers of the reinforced screws

FAQ

Q: How to select the four series of HIOS torque (HP / HDP / HM / HIT)? Q: Q: Q: Q: QZQ0 / HIT Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q

A: See the subject and the work. HP is a desktop one, setting the torque for the electric screwdriver, checking the torque screw and torque wrench, and the torque management of the various rotations; HDP is a branch handheld. The spin torque and torque of the screws that have been strained; HM for self-motivated torque management with an electric screwdriver; HIT for shock torque management with a torque wrench. Fixed-space selection HP, on-site review of screw selection HDP, automatic line selection HM and shock tool selection HIT. HITssStampss

Q: How should the process of the HP-1 be slated?

A: The peak range of the HP-1 measurements is 0.015-0.9 lbf in. It is recommended that the nominal torque of the measured tool should be left in the region of 20%80% in the process. The most steady and accurate readings are guaranteed; relative errors are magnified below 20 per cent, and the higher measure is not measurable. The same series also has such ranges as HP-10, HP-100 and others. Q1, HP-100

Q: Can you detect "screwed screws"?Screech

A: Yes, but with series. The official use of the HDP series is to measure the spin-to-tangle (scaling) of the screws that have been strained and the extra tight torque (scret-up); — HP / HM / HIT is used primarily for torque setting and process management. If the main operation is to review the screws that are strained on the production line, preference is given to the HDP series. / HIT / is used primarily for torque settings and process management

Q: Can measurements be exported? How?

A: Yes. Wireless machine-type tags such as HP-10 / HP-100 / HDP-5 / HDP-50 are equipped with wireless data reception and dispatch functions, with wireless connections to PC, / HP-100 / HDP-5 / HDP-50 Control devices such as PLC transmit measurement torque data and provide dedicated applications for on-site data collection; and models such as HP-1 import computer processing through standard configuration of data output and simulation of output

Q: Can wireless functions be used in the country?

A: The official list of countries/areas that meet the technical standards for wireless machines is shown on the page.! Also indicates that the latest publication is the date of the series (HP, which is marked as 2026, 5, 18, including Japan, the United States, the Philippines, China, China, Japan, the Philippines, China, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the United States, the United States, the United States, the United States, the United Malaysia (subject to additional consultation), EU, UK etc.; HDP-50 marked Japan as of 2025 month 6. Pre-procurement recommended confirmation of the wireless authentication version of the current batch with Yunke Electronics. Reference: 21

Q: Is the product picture the official original?

A: Yes. This page is taken from the official HIOS website (hios.com) open product drawings, which are standardized with the official original white base and watermarked without replacing it with a crowned plume. The official may share the same skin image of different models in the same series, varying in the range, the knife interface and the detector specifications, as shown in the present page

Q: Should regular calibration be required?

A: The official provision of fast-track correction commissioning and periodic inspection maintenance services. Quality system-required periodic calibration; HIOS full-time attached to the check-up report, which can be directly classified as quality files

Q: What do you have with the opportunity?!

A: Distribution of " standard annex " paragraphs by official specification table (detailed in this page specification table with different models), usually including knife/conduct, auxiliary arm, USB line and AC adapter, detector line, The list of arrivals is based on the list of arrivals

About the Product Images on This Page

This page is taken from the public product map of the HIOS product page (hios.com) and is standardized with the official original white base and the "Guangzhou Yunke Electronics Co., Ltd." watermark. The same image may be shared by the authorities for the same series of different models, with variations in the scale, knife interface, detector specifications and measurement patterns, as shown in the present page specification table

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HIOS VB-3020 Torque Testers
Torque Testers

HIOS VB-3020 Torque Testers

VB-3020
└ HIOS (Japan)
HIOS VB-2008PS Torque Testers
Torque Testers

HIOS VB-2008PS Torque Testers

VB-2008PS
└ HIOS (Japan)
HIOS VB-2008 Torque Testers
Torque Testers

HIOS VB-2008 Torque Testers

VB-2008
└ HIOS (Japan)
HIOS VB-1510PS Torque Testers
Torque Testers

HIOS VB-1510PS Torque Testers

VB-1510PS
└ HIOS (Japan)
HIOS VB-1510-18PS-OPC Torque Testers
Torque Testers

HIOS VB-1510-18PS-OPC Torque Testers

VB-1510-18PS-OPC
└ HIOS (Japan)
HIOS VB-1510-18PS Torque Testers
Torque Testers

HIOS VB-1510-18PS Torque Testers

VB-1510-18PS
└ HIOS (Japan)