Home › Products

Product Overview

HIOS HDP-5 Torque Testers (Model HDP-5) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. HIOS HDP-5 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: HIOS | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

HIOS HDP-5 Torque Testers

Technical Specifications

ModelHDP-5
BrandHIOS(JapanHIOS)
SeriesHDP Series (Division Body Type Number digits Torque Meter)
Official ApplicationUse at Measurement Screw Output Torque, and external Torque.
Blade Rod Driver SelectionHDP-5:H4 / HDP-5X:1/4HEX
Communication InterfaceBluetooth (standard)/RS-232C(optional)
Peak Measuring Range (N · M)0.015-0.5
Peak Measuring Range (N · Cm)1.5-50
Peak Measuring Range (Lbf · in)0.15-4.4
Peak Measuring Range (Kgf · Cm)0.15-5
Accuracy±0.5% or less (F.S.)
Minimum Display Unit10 digit
Measurement modePEAK / F.PEAK / TR1 / TR2(Official F.PEAK Measuring Range Lower Limit HDP-5 is 0.026 N · m)
Measuring DirectionRight Screw, Left Screw
Judgment FunctionTool PASS / FAIL Judgment Function
Dimensions (Operation Surface Plate)134 × 100 × 36 mm
Dimensions (Detection Device)HDP-5:92 × Φ32 mm / HDP-5X:98 × Φ32 mm
WeightOperation Surface Plate 495 g / Detection Device 105 g
Detection Device Wire Length2 m
Charging andEquipped With micro USB Type-B Port, supports Charging and Data Transfer (USB 2.0, Maximum 480Mb / s)
Power Supply InputAC 100-240V 50/60Hz 0.4A
Power Supply OutputDC 5V 2A 10W; built-in 1000mA NiMH Battery 3.6V(Operating Voltage 3.3V), Open Unit when Maximum 300mA
Continuous Operating Time (Torque Measuring and Data Transfer)most Length 2.5 hours
Charging time5 hours (can via AC Adapter or Electric USB Port Charging)
Charging Ring Times500 times
Power ConsumptionMaximum 1.5W or less (with Operating Environment and Conditions )
Standard accessoriesBit each 1 pcs (H4: +#0×40mm, +#1×40mm), 1 pcs, USB Wire and AC Adapter ( external Head Specifications and )
Body DescriptionHDP-5X is Same Model Body, Blade Rod is 1 / 4HEX, Official not Single Model

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

HIOS Trail meter full 10 comparison (official series)Strenchment

SeriesModelStructure / Official PositionPeak measure rangeSpunners
HPHP-1Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations0.015-0.9 lbf·in
HPHP-10Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations0.015-1.000 N·m
HPHP-100Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations0.15-10.00 N·m
HDPHDP-5The spin torque used to measure the screws that have been stung, and the extra tight torque..Streaks0.015-0.5 N·m
HDPHDP-50The spin torque used to measure the screws that have been stung, and the extra tight torque..Streaks0.15-5 N·m (HDP-50X to 10 N·m)
HMHM-10Torque management for self-motivated use of electric screwdrivers0.015-1 N·m
HMHM-100Torque management for self-motivated use of electric screwdrivers0.15-10 N·m
HITHIT-200Torque management for shock electric screws and torque wrench0.15-18 N·m
HITHIT-500Torque management for shock electric screws and torque wrench1.5-50 N·m
HITHIT-2000Torque management for shock electric screws and torque wrench25-180 N·m

Key Advantages

  1. Fragmentation structure: displays the separation of the operating panel from the detector, the detector can reach a small working slot and the handheld reading is unshielded
  2. The special "stressed" state: both the torque and the torque can be read directly and can be reviewed for a hard state
  3. Marked wireless data to be received and sent, measuring torque data can be returned wirelessly to control devices such as PC, PLC, etc
  4. Large-scale high-vision screens, measuring values on a wave-like scale, and bright environments can be read
  5. The measurement mode contains PEAK/F.ZQ3/TR1/TR2, which is directly visible in the torque and successive torque wave. / TR1 / TR2. Reference: PEAK
  6. A PASS/FAIL determination function supports routine mass control operations such as electric screwr torque adjustments and setting
  7. Remote switching models and thresholds for external equipment can be used to facilitate integration with the industrial and industrial interface
  8. The detector is only 105 g, with a low burden of hand-held operations for long periods

Applied trade & test object

The subjects of the tests included electric screws (including self-motivated and shock), tox screws, preset and digital torque wrench, air-lifters, and the review of the stun and torque-towers of the reinforced screws

FAQ

Q: How to select the four series of HIOS torque (HP / HDP / HM / HIT)? Q: Q: Q: Q: QZQ0 / HIT Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q

A: See the subject and the work. HP is a desktop one, setting the torque for the electric screwdriver, checking the torque screw and torque wrench, and the torque management of the various rotations; HDP is a branch handheld. The spin torque and torque of the screws that have been strained; HM for self-motivated torque management with an electric screwdriver; HIT for shock torque management with a torque wrench. Fixed-space selection HP, on-site review of screw selection HDP, automatic line selection HM and shock tool selection HIT. HITssStampss

Q: How should the process of the HDP-5 be slated?

A: The peak range of the HDP-5 measurements is 0.015-0.5 N·m. It is recommended that the nominal torque of the measure should be left in the range of 20% ~ 80%, with the most steady readings. Precision is most assured; relative errors are magnified below 20 per cent, and are not measurable over the measure. The same series also has such brackets as HDP-50

Q: Can you detect "screwed screws"?Screech

A: Yes, but with series. The official use of the HDP series is to measure the spin-to-tangle (scaling) of the screws that have been strained and the extra tight torque (scret-up); — HP / HM / HIT is used primarily for torque setting and process management. If the main operation is to review the screws that are strained on the production line, preference is given to the HDP series. / HIT / is used primarily for torque settings and process management

Q: Can measurements be exported? How?

A: Yes. Wireless machine-type tags such as HP-10 / HP-100 / HDP-5 / HDP-50 are equipped with wireless data reception and dispatch functions, with wireless connections to PC, / HP-100 / HDP-5 / HDP-50 Control devices such as PLC transmit measurement torque data and provide dedicated applications for on-site data collection; and models such as HP-1 import computer processing through standard configuration of data output and simulation of output

Q: Can wireless functions be used in the country?

A: The official list of countries/areas that meet the technical standards for wireless machines is shown on the page.! Also indicates that the latest publication is the date of the series (HP, which is marked as 2026, 5, 18, including Japan, the United States, the Philippines, China, China, Japan, the Philippines, China, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the United States, the United States, the United States, the United States, the United Malaysia (subject to additional consultation), EU, UK etc.; HDP-50 marked Japan as of 2025 month 6. Pre-procurement recommended confirmation of the wireless authentication version of the current batch with Yunke Electronics. Reference: 21

Q: Is the product picture the official original?

A: Yes. This page is taken from the official HIOS website (hios.com) open product drawings, which are standardized with the official original white base and watermarked without replacing it with a crowned plume. The official may share the same skin image of different models in the same series, varying in the range, the knife interface and the detector specifications, as shown in the present page

Q: Should regular calibration be required?

A: The official provision of fast-track correction commissioning and periodic inspection maintenance services. Quality system-required periodic calibration; HIOS full-time attached to the check-up report, which can be directly classified as quality files

Q: What do you have with the opportunity?!

A: Distribution of " standard annex " paragraphs by official specification table (detailed in this page specification table with different models), usually including knife/conduct, auxiliary arm, USB line and AC adapter, detector line, The list of arrivals is based on the list of arrivals

About the Product Images on This Page

This page is taken from the public product map of the HIOS product page (hios.com) and is standardized with the official original white base and the "Guangzhou Yunke Electronics Co., Ltd." watermark. The same image may be shared by the authorities for the same series of different models, with variations in the scale, knife interface, detector specifications and measurement patterns, as shown in the present page specification table

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

HIOS VB-3020 Torque Testers
Torque Testers

HIOS VB-3020 Torque Testers

VB-3020
└ HIOS (Japan)
HIOS VB-2008PS Torque Testers
Torque Testers

HIOS VB-2008PS Torque Testers

VB-2008PS
└ HIOS (Japan)
HIOS VB-2008 Torque Testers
Torque Testers

HIOS VB-2008 Torque Testers

VB-2008
└ HIOS (Japan)
HIOS VB-1510PS Torque Testers
Torque Testers

HIOS VB-1510PS Torque Testers

VB-1510PS
└ HIOS (Japan)
HIOS VB-1510-18PS-OPC Torque Testers
Torque Testers

HIOS VB-1510-18PS-OPC Torque Testers

VB-1510-18PS-OPC
└ HIOS (Japan)
HIOS VB-1510-18PS Torque Testers
Torque Testers

HIOS VB-1510-18PS Torque Testers

VB-1510-18PS
└ HIOS (Japan)