HIOS HM-100 Torque Testers (Model HM-100) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. HIOS HM-100 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: HIOS | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | HM-100 |
|---|---|
| Peak Measuring Range (N · M) | 0.15-10 |
| Peak Measuring Range (Lbf · in) | 15-1000 |
| Brand | HIOS(JapanHIOS) |
| Series | HM Series (Automatic Unit Use Torque Meter) |
| Official Application | Use at Automatic Unit Use Motorised Screw Blade Torque Management Management. |
| Accuracy | ±0.5% or less (F.S.) |
| Measurement mode | TRACK( with) and PEAK(Peak) |
| Dimensions (Display Single ) | 165 × 95 × 55(H)mm |
| Dimensions (Detection Device) | 119 × 45 × 33(H)mm |
| Weight | Torque Display Part 1 kg / Detection Part 0.35 kg |
| Detection Device Wire | 1.7 m(P/N: DPC-0506) |
| Battery Set (Charging Time) | 6V NiMH Battery (8 hours or less) |
| Full Electric Continuous Operating Time | 8 hours |
| Battery Life | Approx. Charging 300 times |
| Dedicated Charger | Input AC 100V, 120V, 220-240V / Output DC 7.2V 120mA |
| Standard accessories | with Screw Rotation Connection Base Fidaptor 1 pcs (P / N: TFM26-Z, ), Rotation Connection Base Part Replace Screw 5 pcs, Fixed Use internal six Angle Setting Screw 2 pcs, 1.5mm L Type Wrench 1 pcs, Dedicated Battery Charger |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Series | Model | Structure / Official Position | Peak measure rangeSpunners |
|---|---|---|---|
| HP | HP-1 | Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations | 0.015-0.9 lbf·in |
| HP | HP-10 | Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations | 0.015-1.000 N·m |
| HP | HP-100 | Torque set for electric screws, torque screws and torque wrench, etc., and torque management of various rotations | 0.15-10.00 N·m |
| HDP | HDP-5 | The spin torque used to measure the screws that have been stung, and the extra tight torque..Streaks | 0.015-0.5 N·m |
| HDP | HDP-50 | The spin torque used to measure the screws that have been stung, and the extra tight torque..Streaks | 0.15-5 N·m (HDP-50X to 10 N·m) |
| HM | HM-10 | Torque management for self-motivated use of electric screwdrivers | 0.015-1 N·m |
| HM | HM-100 | Torque management for self-motivated use of electric screwdrivers | 0.15-10 N·m |
| HIT | HIT-200 | Torque management for shock electric screws and torque wrench | 0.15-18 N·m |
| HIT | HIT-500 | Torque management for shock electric screws and torque wrench | 1.5-50 N·m |
| HIT | HIT-2000 | Torque management for shock electric screws and torque wrench | 25-180 N·m |
The subjects of the tests included electric screws (including self-motivated and shock), tox screws, preset and digital torque wrench, air-lifters, and the review of the stun and torque-towers of the reinforced screws
Q: How to select the four series of HIOS torque (HP / HDP / HM / HIT)? Q: Q: Q: Q: QZQ0 / HIT Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q
A: See the subject and the work. HP is a desktop one, setting the torque for the electric screwdriver, checking the torque screw and torque wrench, and the torque management of the various rotations; HDP is a branch handheld. The spin torque and torque of the screws that have been strained; HM for self-motivated torque management with an electric screwdriver; HIT for shock torque management with a torque wrench. Fixed-space selection HP, on-site review of screw selection HDP, automatic line selection HM and shock tool selection HIT. HITssStampss
Q: How should the process of the HM-100 be slated?
A: The peak range of the HM-100 measurements is 0.15-10 N·m. It is recommended that the nominal torque of the measure should be left in the range of 20% ~ 80%, with the most steady readings. Precision is most assured; relative errors are magnified below 20 per cent, and are not measurable over the measure. The same series also has such brackets as HM-10
Q: Can you detect "screwed screws"?Screech
A: Yes, but with series. The official use of the HDP series is to measure the spin-to-tangle (scaling) of the screws that have been strained and the extra tight torque (scret-up); — HP / HM / HIT is used primarily for torque setting and process management. If the main operation is to review the screws that are strained on the production line, preference is given to the HDP series. / HIT / is used primarily for torque settings and process management
Q: Can measurements be exported? How?
A: Yes. Wireless machine-type tags such as HP-10 / HP-100 / HDP-5 / HDP-50 are equipped with wireless data reception and dispatch functions, with wireless connections to PC, / HP-100 / HDP-5 / HDP-50 Control devices such as PLC transmit measurement torque data and provide dedicated applications for on-site data collection; and models such as HP-1 import computer processing through standard configuration of data output and simulation of output
Q: Can wireless functions be used in the country?
A: The official list of countries/areas that meet the technical standards for wireless machines is shown on the page.! Also indicates that the latest publication is the date of the series (HP, which is marked as 2026, 5, 18, including Japan, the United States, the Philippines, China, China, Japan, the Philippines, China, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the Philippines, the United States, the United States, the United States, the United States, the United Malaysia (subject to additional consultation), EU, UK etc.; HDP-50 marked Japan as of 2025 month 6. Pre-procurement recommended confirmation of the wireless authentication version of the current batch with Yunke Electronics. Reference: 21
Q: Is the product picture the official original?
A: Yes. This page is taken from the official HIOS website (hios.com) open product drawings, which are standardized with the official original white base and watermarked without replacing it with a crowned plume. The official may share the same skin image of different models in the same series, varying in the range, the knife interface and the detector specifications, as shown in the present page
Q: Should regular calibration be required?
A: The official provision of fast-track correction commissioning and periodic inspection maintenance services. Quality system-required periodic calibration; HIOS full-time attached to the check-up report, which can be directly classified as quality files
Q: What do you have with the opportunity?!
A: Distribution of " standard annex " paragraphs by official specification table (detailed in this page specification table with different models), usually including knife/conduct, auxiliary arm, USB line and AC adapter, detector line, The list of arrivals is based on the list of arrivals
This page is taken from the public product map of the HIOS product page (hios.com) and is standardized with the official original white base and the "Guangzhou Yunke Electronics Co., Ltd." watermark. The same image may be shared by the authorities for the same series of different models, with variations in the scale, knife interface, detector specifications and measurement patterns, as shown in the present page specification table
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.