HIOS HP-100 Bench Digital Torque Tester (Model HP-100) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. HIOS HP-100 bench digital torque tester, 0.15-10.00 N.m, +/-0.5% FS, standard wireless data transfer, PASS/FAIL judgement, PEAK/F.PEAK/TR1/TR2.
Brand: HIOS | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | HP-100 |
|---|---|
| Brand | HIOS(JapanHIOS) |
| Series | HP Series (units Type a Body Type Number digits Torque Meter) |
| Official Application | Use at Motorised Screw Blade Torque Setting, Torque Screw Blade and Torque Wrench etc. Check and each Type Rotatable Body Torque Management Management. |
| Communication Interface | Bluetooth (standard)/RS-232C(optional) |
| Peak Measuring Range (N · M) | 0.15-10.00 |
| Peak Measuring Range (N · Cm) | 15-1000 |
| Peak Measuring Range (Lbf · in) | 1.5-90.0 |
| Peak Measuring Range (Kgf · Cm) | 1.5-100.0 |
| Minimum Display Unit | 10 digit |
| Measurement mode | PEAK(Peak) / F.PEAK(No. a Peak) / TR1(Torque Wave ) / TR2(Continuous Torque Wave ) |
| Measuring Direction | Right Screw, Left Screw |
| Accuracy | ±0.5% or less (F.S.) |
| Judgment Function | Tool PASS / FAIL Judgment Function |
| Charging and | Equipped With micro USB Type-B Port, supports Charging and Data Transfer (USB 2.0, Maximum 480Mb / s) |
| Power Supply Input | AC 100-240V 50/60Hz 0.4A |
| Power Supply Output | DC 5V 2A 10W; built-in 1000mA NiMH Battery 3.6V(Operating Voltage 3.3V), Open Unit when Maximum 300mA |
| Continuous Operating Time (Torque Measuring and Data Transfer) | most Length 2.5 hours |
| Charging time | 5 hours (can via AC Adapter or Electric USB Port Charging) |
| Charging Ring Times | 500 times |
| Power Consumption | Maximum 1.5W or less (with Operating Environment and Conditions ) |
| Dimensions (W × D × H) | 230 × 110 × 50 mm(excluding Maximum Part Division) |
| Weight | 1.94 kg |
| Wireless Description | Official : to 2026 years 5 months 18 Day Compliant with Wireless Unit Type Standard / Place Package Japan, United States, , in , (requires ), , , its, and, pcs etc., by Official most New is Standard. |
| Model Description | This with MOTIVE units MOTIVE Same Model HP-100(Wire above id 5093), This records is HIOS JapanHIOS Product, by 「HP-100 HIOS」 Division |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The HIOS HP-100 is a bench-top all-in-one digital torque meter from the Japanese HIOS HP series. Its peak measuring range is 0.15-10.00 N·m (15-1000 N·cm / 1.5-90.0 lbf·in / 1.5-100.0 kgf·cm) with an accuracy within ±0.5% (F.S.). The official application is setting the torque of electric screwdrivers, checking torque screwdrivers and torque wrenches, and managing the torque of rotating parts in general.
Wireless data transfer is fitted as standard, so torque readings can be sent to a PC or PLC without extra hardware; RS-232C is optional. A large high-visibility display shows the measured value and the waveform together, and measurement modes and thresholds can be switched remotely from an external device. For help choosing a range, please contact our engineers.
Electronics and 3C assembly (phones, notebooks, appliances), automotive and motorcycle components, precision machinery and optical instruments with micro screws below 10 N·cm, automated screw-feeding lines, impact tools and torque wrenches, and incoming / outgoing inspection and periodic calibration records. Test objects include electric screwdrivers (including automated and impact types), torque screwdrivers, preset and digital torque wrenches, pneumatic drivers, and the loosening and re-tightening torque of already fastened screws.
Four HIOS series serve different jobs: HP is a bench-top all-in-one unit for setting electric screwdrivers and checking torque screwdrivers / wrenches; HDP is a split handheld unit for the loosening and additional-tightening torque of already fastened screws; HM manages torque of automated-line screwdrivers; HIT handles impact screwdrivers and torque wrenches. Choose HP for a fixed setting station, HDP for on-site re-checks, HM for automated lines and HIT for impact tools. Within HP, the HP-100 covers 0.15-10.00 N·m; keep the nominal torque of the tool in the 20%–80% band, since lower values amplify relative error. Other capacities such as the HP-1 and HP-10 are available. Power: AC 100-240V 50/60Hz 0.4A input, DC 5V 2A 10W output, built-in 1000 mA Ni-MH 3.6V pack (3.3V operating, 300 mA max at start-up), up to 2.5 hours of continuous measurement and transfer, 5-hour charge via adapter or PC USB, 500 charge cycles, under 1.5 W consumption, 230 × 110 × 50 mm and 1.94 kg.
Q: Can it measure an already tightened screw?
A: Yes, but that is the HDP series' official purpose (loosening torque and additional tightening torque). HP / HM / HIT are mainly for torque setting and process management; choose HDP if re-checking tightened screws is the main task.
Q: How is data exported, and is the wireless version usable in China?
A: HP-10 / HP-100 / HDP-5 / HDP-50 wireless models transmit to PC / PLC as standard and include a dedicated application; HP-1 uses standard data and analogue outputs. The official page lists countries / regions meeting the radio technical standard, latest publication to be confirmed — the HP series lists Japan, USA, Philippines, China, Malaysia (enquire separately), EU, UK, Turkey, Egypt and Argentina as of 18 May 2026, while the HDP-50 listed Japan only as of 21 June 2025. Please confirm the certification version of the current batch with us before ordering. Note: this page is the HIOS Japan HP-100; a same-named MOTIVE HP-100 is listed separately on this site (id 5093).
Q: Are the product photos official, and is calibration needed?
A: Images come from the public HIOS product library (hios.com), normalised to a white background and watermarked, without substitution; HIOS may use one appearance photo for several models, so differences lie in range, bit interface and detector — refer to the specification table. HIOS offers calibration and periodic inspection services; every instrument ships with an inspection certificate for your quality records.
Guangzhou Yunke Electronic Co., Ltd. supplies the HIOS HP / HDP / HM / HIT range with selection advice, quotations, demonstrations, standard accessories (bits / adapters, auxiliary arm, USB cable and AC adapter, detector cable, inspection certificate and calibration sheet, varying by model) and after-sales support.
Values above are transcribed from the official HIOS HP series specification table and product page; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.