D&T ES310D Electronic Balances (Model ES310D) is a Electronic Balances supplied by Guangzhou Yunke Electronics Co., Ltd. D&T ES310D Electronic Balances — Electronic Balances · Yunke Electronics. Request a quotation and datasheet.
Brand: D&T | Category: Electronic Balances
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ES310D |
|---|---|
| Brand | D&T D&T(D&T with Limit ) |
| Series | ES-D Series |
| Category | degrees Flat |
| Maximum Range | 310g |
| Readability (Graduation d) | 1mg |
| Repeatability Error | ±1mg |
| Linearity Error | ±1mg |
| Sample Weight | >20g |
| Degree Readability | 0.001g/cm³ |
| Operating Temperature Range | 13℃~25℃ |
| Operating Humidity Range | 10%RH~70%RH |
| Typical Stabilization Time | ≤2.5 s |
| Warm-up Time | 30-60 minutes |
| Pan Size | Φ115mm |
| Weighing Chamber Height | 210mm |
| Dimensions | 210mm×310mm×315mm |
| Operating Power Supply | Input: 220V AC / 50HZ; Output: 7.5V DC / 600mA |
| Communication Baud Rate | 300、600、1200、2400、4800、9600 |
| Sensor | can Capacitance Type Sensor |
| Display | LCD Display |
| Weighing Mode | Basic Weighing, degrees Detection Mode, Counting Weighing |
| Weighing Unit | (g), (Ct), (oz) |
| Interface | built-in RS232 Dual toward Communication Interface, can Connection Electric / Micro Type Printing Unit |
| Optional Accessories | optional Portable Type Micro Type Printing Unit, USB Rotation Port Connection Wire |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The following table summarizes all the models in the official D'Ant ES-D series model tables, which are now high and allow for horizontal comparison of reading accuracy and measurement
| Model | Maximum Range | Readability (Graduation d) | Repeatability Error | Linearity Error |
|---|---|---|---|---|
| ES120D | 120g | 1mg | ±1mg | ±1mg |
| ES200D | 200g | 1mg | ±1mg | ±1mg |
| ES310D | 310g | 1mg | ±1mg | ±1mg |
| ES410D | 410g | 1mg | ±1mg | ±1mg |
| ES500D | 500g | 1mg | ±1mg | ±1mg |
Q: What is the read accuracy of ES310D and what is it appropriate to call it? Q: What is the reading accuracy of ?
A: The fraction value (readable) is 1mg, the largest of the ranges 310g, one in a thousand. ES310D is suitable for the plastic rubber density detection scene; if a higher reading accuracy or a larger number of processes is required, the number of readings will be reduced to a higher range of readings.., the fraction value is 310g, the maximum of which is 1 in a thousand. The next model can be selected in the same series.!
Q: Is this an inside or outside school?. Reference: ES310D
A: This page specification table does not contain a separate calibration method, and the official ES-D series provides external code calibration and full automatic in-house calibration configurations, and requests confirmation of the specific configuration with the sales officer when ordering
Q: Can ES310D export data on a computer?
A: Yes. This machine has a two-way communication interface for RS232, Portrate 300, 600, 1200, 2400, 4800, 9600, , 9600 X-X-X-X-X-X-X-X-X-X-X-X-X-X-X- Computers can be connected to microprinters, with the result of volume transfer to open applications such as PC and XI; or with USB spin-off links to portable printers
Q: How long does the sky start to heat up?!?
A: The official start-up temperature is 30-60 minutes. It is recommended that the level be preheated and adjusted before the scale, and that the wind-proofing door be closed when the scale is measured to avoid the effects of a dramatic change in air flow, vibration and temperature
Q: What is the size of the scale and the room size of the ES310D?
A: Scale, 115mm, the height of the volume room 210mm. When selecting a sample, check the shape of the container to ensure that it is placed in the volume room and placed flat on the scale
Q: Is the product picture the official original?
A: The official original. This page is taken from the official website of the DeAnte (tjdat.com) from the public product photograph of the ES-D series, which is standardized with a water stamp and not replaced by a crowned plume. The official product series is available for different types of appearance, with differences in the model and specification parameters, as shown in the list of specifications on this page
ES310D is positioned as a density scale of one in 1,000, plating of the gold ceramic sensor, density readability 0.001g/cm3. When you select a model, see if the read accuracy (scored) meets the process or standard requirements._ Check whether the maximum amount of time is covered by the daily maximum sample weight and check the size of the scales and scales to hold the sample and the container. The more accurate readings are, the more sensitive the environment is to warm humidity, air currents and vibrations, and it is recommended that the solid surface and wind shield be used. and regularly calibrated/ verified in accordance with the electronic scales of JJG 1036
DeAnte (D&T, Deonte Sensitivity Technology Ltd., Tianjin City) is a manufacturer of electronic scales and high accuracy heavy instrumentation with product coverage of micro, ultra-microanalytic scales and industrial heavy equipment.StampsSt.St.St.s.s.s.s.s.s.s.s.s.s.s.s.s This page is marked by the official deAnt public specifications, with Guangzhou Yunke Electronics Co., Ltd. responsible for supply and technical support; the official pricing is not displayed on this page, and the salesperson is requested to confirm the offer and the period
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.