FLUKE TiS55 PRO (Model TiS55 PRO) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE TiS55 PRO — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | TiS55 PRO |
|---|---|
| Infrared Resolution | 288 x 216(62,208 pixels) |
| Pixels | 576 x 432 |
| Measure Device Type | Non- Control Cold Type Infrared Flat Measure Device |
| Response Range | 8-14 µm |
| Field of View Angle | 42° x 32° |
| IFOV | 2.50 mRad |
| Minimum Distance | 0.1 m |
| Focus Welding Systems | Manual Focus + Adjustment |
| Adjustment Agile Focus | with |
| Wireless Connection | with, supports Direct Wireless Transfer Thermal Diagram to Unit or PC |
| Fluke Connect Express Standard Software | with, supports Thermal Diagram Analysis, , Customisable , Check Management Management etc. Functions |
| Origin | with, via two or records Automatic Thermal Diagram, and is Thermal Diagram Origin |
| IR-Fusion Infrared Can Light | Continuous , 0% to 100%, 1% is Infrared Image Increment can cells |
| in (PIP) | with |
| Display | 3.5"(8.9 cm to Angle Wire) / Display 640 x 480 LCD |
| Compliant Body Range Meter | Dedicated is Single Operating and Meter |
| Thermal Sensitivity | <= 40 mk(0.04 ℃) |
| Temperature Width (Horizontal and Degree Adjustment Cell) | Flow Automatic and Manual Zoom |
| Manual Mode Lower Automatic Adjustment Cell | with |
| Minimum Range (Manual Mode Lower) | 3 °C |
| Minimum Range (Automatic Mode Lower) | 3 °C |
| Built-in Number Phase Unit (Can Light) | 1300 pixels |
| Image | 9 Hz or 30 Hz |
| Temperature Range | -20 - 550 °C |
| Temperature Range | -20 °C ~ 150 °C / 0 ℃ ~ 550 ℃ |
| Accuracy | ±2°C or of reading 2% whichever is greater / (at 18 ~ 28 ℃ Environment Temperature) |
| Unit Temperature Correction | with, supports Emission Rate, Environment Temperature, Measure Temperature Distance, Rate Correction |
| Standard Adjustment Plate | 10 Type / degrees, Ferrous , Height to than degrees, , , , Rotation, degrees Rotation, , to than |
| Point Temperature | in points (Fixed) |
| Height Low Temperature Automatic | Automatic Height Low Temperature points |
| User Can | points: 5 pcs / Wire: 5 pcs / Region: 5 pcs |
| Customisable Temperature Difference Meter Calculation | 3 pcs |
| Phase Maximum Temperature Difference Meter Calculation | with |
| Image Mode | Infrared, can See Light, in , Infrared can See Light |
| Sound Alarm | Alarm Object: Maximum Temperature points, most Low Temperature points, in points, Customisable points or Wire or Region, three Phase Maximum Temperature Difference, Customisable Temperature Difference / Alarm Conditions: Temperature above, Temperature under |
| Alarm | with, Temperature above, Temperature under and Temperature Range internal, Temperature Range external |
| Preset Measuring Plate | 50 pcs |
| Memory | standard 64GB SD Caliper / can Extension to 1TB |
| Image , , Unit | Single Image , and Functions |
| Image Part Division Type | JPEG (with Temperature Data) |
| Specification | with |
| Specification | with, via Bluetooth Unit, most Length can 60 s |
| IR-Photo Notes Plate | with, up to will 3 Width external can See Light Image, including at with Temperature Data JPEG Text pcs in. |
| Specification | with, Multi Language |
| Weight Class | with, Normal, in degrees, Weight, Extreme Weight Type Weight Property Class |
| Video and Division Type | Standard Video: mp4 |
| Interval | with, per User Setting Time Interval, Automatic Diagram Plate |
| and Management Management Check Wire | with, via Fluke Connect Express Software |
| Start-up, and Management Management Check Task | with, via Thermal Imager |
| Thermal Check Task Automatic Classification Level | with |
| Automatic and Total | with |
| Battery (Can More , Can Charging) | Rechargeable Battery |
| Battery Battery Life Time | > 5 hours / ( Tool Body Setting and Operating , Actual Operating Time can Energy not Same) |
| Battery Charging Time | < 4 hours to Fully charged Quantity |
| Battery Charging Method | Ti SBC3B Dual Groove Battery Charger, / or Operating Type-C Interface at Thermal Imager in Charging |
| External Power Supply | via Supplied AC Adapter, Operating AC Electric Operating, the Adapter Output such as under: 15 VDC, 2 A |
| Preset Key | 6 pcs |
| Laser Device | with |
| LED Illumination Lamp | with, Electric Illumination |
| Type-C Interface | with, supports Charging, Data Transfer |
| Operating Temperature | -10°C to 50°C |
| Memory Temperature | -20°C to 60°C, without battery |
| Relative Humidity | 10% to 95% non-condensing |
| Safety Standard | IEC 61010-1: Pollution Degree 2 |
| EMC Compatibility | IEC 61326-1: Electromagnetic / Environment; / CISPR 11: No. 1 groups, A Class |
| Wireless Electric Frequency (WIFI and Bluetooth) | 2.4GHz |
| Wireless Electric Output Power (WIFI and Bluetooth) | <100mW |
| Laser | IEC 60825-1, 2 Class Laser, 650 nm, < 1 mW |
| Specification | can 2 m |
| IP Rating | IEC 60529: IP52 |
| RoHS3 | Compliant with |
| Dimensions (Height X Width X Length) | Approx. 26.7 cm x 10.1 cm x 14.5 cm |
| Weight (incl. Battery) | 950 g |
| Supported Language | Body in Text, Text |
| Warranty Period | 2 years |
| Calibration Period | 2 years |
| Standard Configuration | Main unit *1, Battery *2, Dual Groove Charging Base *1, Package *1, Hardness Case *1, SD Caliper *1, Charging Adapter *1 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Hard core upgrade, smart and thin compared to the original model (TiS55+). The new generation of products (TiS55 PRO) pixels were raised from 256 X 192 to 288 X 216. XXQXX X XZ ..SSSSsSS The whole optical system also provides a triple upgrade of the lens/detector/super-resolution, reducing the image noise ratio and making the picture more sophisticated.Scope – all of which are relevant for the maintenance of equipment, research and development tubes, etc.. /Screaks To be simple, only 4 steps are required to help you efficiently complete the screening and reporting of the 1 step, select the preset scenario: for scenes or critical devices that often require repeated testing, the following are the most important features: If you want to harmonize the criteria for each measurement and avoid errors caused by different test parameters set, you can presave the scenario test parameters that TiS55 PRO will require,_ And use the shortcut meme key to call at any time to reduce the time wasted and potential error of each time setting parameters. 2 step, sweep automatic naming: by scanning two-dimensional codes or bar codes, Identify the corresponding device name, automatically save as the thermal map name, and the thermal map name stored on the thermal imager mainframe will automatically correspond to all the heat map names in your cell phone, computer, report._ Reduces the potential errors in your manual recording and the large number of devices and data matching. 3, wireless second heat transfer map: Thermograms can be transferred directly to a cell phone or computer by wireless._. The traditional way of transmitting the computer + data lines, the problem is reported in time for the site. One key automatic reporting: with free Flukeivynal analysis, the hot map editing, trend log analysis, one key generating the report, setting up a custom reporting template, a report, and a report._ The Chinese-language channel operates the interface to help you get the final step done efficiently. Save time and focus on what really matters. Inspection Specialist Standard Management Fluke Inspection function,!Stand Control System, Standards, and Stands The search route can be created through Flukeivitat software, which will import the heat imager to select and open the corresponding route, and will track progress to archive the heat map according to task one; Helps the equipment manager to standardize and data from the source, with hand-held hands, easily and easily with the 3.5 inch, with a single human engineering look, designed for on-site inspection. Agileaydin, shortening the manual twig button process to%S. Reference: 4
Visualize temperature distribution for electrical inspection, equipment heat screening and building detection; in the selection of models, attention is given to infrared resolution, temperature range and thermal sensitivity
Q: What can FLUKE Fluke TiS55Pro heat imaging cameras do?
A: FLUKE Fluke TiS55Pro Thermal Image Camera is a thermal imaging camera product of FLUKE Fluke. X-XI . Qu.. The main functions listed officially include: 288 x 216 pixels with a clearer and more sophisticated picture quality; and the-20 to 550 °C process, which is a very good way to get the picture out of the system. , and X , which is a good way to get the information from the public.s For most equipment maintenance and R & D tube settings; free of + manual combing, remote scanning of big targets / close-range detection of small targets, agile switching. if you want to use a work-selection type, you can provide measurement of objects and time requirements. & & T-T. Confirmed with the assistance of Clouds Section.!
Q: What are the key technical indicators for TiS55 PRO? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q
A: The list of parameters for this page has been compiled as official information and contains a total of 80 items covering key functions/temperature measurement/data storage and image capture/checking [1]. For more detailed accuracy and environmental conditions, please refer to the official manual and this page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the type of FLUKE Fluke TiS55Pro thermal imaging camera? What are the scenarios?
A: This product belongs to the thermal imaging camera (FLUKE Fluke/ Heat imaging camera). temperature distribution is visible for electrical inspection, equipment heat screening and building testing; infrared resolution is the focus of selection. Temperature range and thermal sensitivity.?
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.