Home › Products

Product Overview

FLUKE 1625-2 (Model 1625-2) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 1625-2 — FLUKE · Yunke Electronics. Request a quotation and datasheet.

Brand: FLUKE | Category: FLUKE

Sales Inquiries: 15626018696 · 78403603@qq.com

FLUKE 1625-2

Technical Specifications

Memory Devicevia USB Port can internal Part Memory Device Memory Multi up to 1500 records Recording
Measuring FunctionsVoltage and Frequency, incl. / excluding Clamp Type Current Device three Extreme and Extreme Grounding Resistance, two Extreme AC Resistance, two Extreme and Extreme DC Resistance
Display4 Number digits (2999 Number digits) - 7 Range Display (can Property Height)
OperationCentre Rotatable Open and Functions Key
Operating Temperature-10°C to 50°C(14°F to 122°F)
Storage Temperature-30°C to 60°C(-22°F to 140°F)
Temperature Coefficient± of reading 0.1% / °C 28°C
Protection Typeper EN60529, Housing Body IP Rating is IP56; Battery IP Rating is IP40
Maximum VoltageWarning – Port " Clamp Port " to Port E, ES, S or H
SafetyUse Dual Weight and / or plus Insulation Protection. To Ground Maximum 50 V(per IEC61010-1). Pollution Degree 2
Mass Standardper DIN ISO 9001 Standard Open , Meter and Origin
ExternalCompliant with DIN 43780 (8 / 76)
Power Supply6 x 1.5 V Alkaline Battery (IEC LR6 or AA Type)
Battery Life RangeOperating IEC LR6 / AA Type: General Normal is 3,000 times Measurement (RE+RH ≤ 1 kΩ)
Dimensions (Width X Height X Depth)250 x 133 x 187 mm (9.75 x 5.25 x 7.35 in)
Weight≤ 1.1 kg (2.43 lb)(excluding Accessories); 7.6 kg (16.8 lb)( with Case in incl. Accessories and Battery)
Housing MaterialSee the original manufacturer datasheet
Measuring Error Extreme Limit:Full Wave Flow
Measuring Range1 V to 50 V
Display Range0.0 V to 50 V
Resolution0.1 V
Frequency RangeAC / DC 45 Hz to 400 Hz Correction Wave
Accuracy±(of reading 5% + 5 Digits)
Measuring SeriesApprox. 4 times Measurement / s
InternalApprox. 1.5 MΩ
Maximum OverloadUrms = 250 V
Measuring Error Extreme Limit:Measurement Voltage Period
Measuring Range6.0 Hz to 400 Hz
Display Range16.0 Hz to 299.9 Hz to 999 Hz
Resolution0.1 Hz to 1 Hz
Range1 V to 50 V
Accuracy±(of reading 1% + 2 Digits)
Measuring Methodper IEC61557-5 Standard Use Probe Measurement Current and Voltage
Voltage20 / 48 V, AC
Current250 mA(AC)
Measuring FrequencyManual or Automatic Selection 94, 105, 111 and 128 Hz(AFC), at Number R¹ in is 55 Hz
Noise120 dB(16 2 / 3, 50, 60 and 400 Hz)
To Ground Maximum OverloadUrms = 250 V
with Error or QuantityReference Conditions or Specified Operating Range No. Code per IEC1557 Standard Phase Part Division or Test Test Type
with ErrorReference Conditions A No. 5 Part Division 6.1 cells R
DigitReference Position ±90° E1 No. 1 Part Division 4.2 cells R
Supply Voltageby Manufacturer Gauge Setting Extreme Limit Value E2 No. 1 Part Division 4.2 and 4.3 cells R
Temperature0°C and 35°C E3 No. 1 Part Division 4.2 cells T
VoltageNo. 4.2 and 4.3 cells E4 No. 5 Part Division 4.2 and 4.3 cells T
Probe and Grounding Electric Extreme Resistance0 to 100 x RA but ≤ 50 kΩ E5 No. 5 Part Division 4.3 cells T
Welding Systems FrequencyNominal Frequency 99% to 101% E7 No. 5 Part Division 4.3 cells T
Welding Systems VoltageNominal Voltage 85% to 110% E8 No. 5 Part Division 4.3 cells T
Operation ErrorB = ±(|A| + 1,15 √E²1 E²2 E²3 E²4 E²5 E²6) No. 5 Part Division 4.3 cells R
Measuring Range0.020 Ω to 300 kΩ
Display Range0.001 Ω to 2.999 Ω
Resolution0.001 Ω
Accuracy±(of reading 2% + 2 Digits)
Operation Error±(of reading 5% + 5 Digits)
Measuring TimeFixed Frequency when General Normal is 8 s Operating Automatic Frequency Control, Maximum 30 s, with Measurement Frequency Ring
by Probe and Grounding Electric Extreme Resistance Additional ErrorRH(RS + 2000 Ω) / RE x 1.25 x 10-6% + 5 Digits
RH and RS Measuring ErrorFixed Frequency when General Normal is RE + RS + RH 10%
Maximum Probe Resistance≤ 1 MΩ
Maximum Grounding Electric Extreme Resistance≤ 1 MΩ
Umeas = 48 V at RH< 300 Ω
Umeas = 20 V at RH< 250 Ω
Resolution1 mΩ
Measuring Methodper EN61557-5 Standard Use Probe Measurement Current and Voltage, and Use external Pressure Device Measurement Single pcs pcs Circuit in Current.
Voltage20 / 48 V, AC
Current250 mA(AC)
Measuring FrequencyManual or Automatic Selection 94, 105, 111 and 128 Hz (AFC), 55 Hz (R¹)
Noise120 dB(162 / 3, 50, 60 and 400 Hz)
To Ground Maximum OverloadTo Ground Maximum Urms = 250 V(will not Start-up Measurement)
Measuring Range0.020 Ω to 300 kΩ
Display Range0.001 Ω to 2.999 Ω
Resolution0.001 Ω
Accuracy±(of reading 7% + 2 Digits)
Operation Error±(of reading 10% + 5 Digits)
by Probe and Grounding Typical Electric Extreme Resistance Additional ErrorRH(RS + 2000 Ω) / RETOTAL x 1.25 x 10-6% + 5 Digits
RH and RS Measuring ErrorFixed Frequency when General Normal is RETOTAL + RS + RH 10%
Measuring TimeFixed Frequency when General Normal is 8 s Operating Automatic Frequency Control, Maximum 30 s, with Measurement Frequency Ring.
Measure Single Pcs Pcs Minimum Current0.5 mA Operating Device (1000:1)
Measure Single Pcs Pcs Minimum Current 0.1 mAOperating Device (200:1)
Via Device Maximum Current3 A Operating Device (1000:1)
Measuring MethodMeasurement Current and Voltage
Measuring Voltage20 V AC Voltage,
Current> 250 mA(AC)
Measuring FrequencyManual or Automatic Selection 94, 105, 111 and 128 Hz (AFC)
Measuring Range0.020 Ω to 300 kΩ
Display Range0.001 Ω to 2.999 Ω
Resolution0.001 Ω
Accuracy±(of reading 2% + 2 Digits)
Operation Error±(of reading 5% + 5 Digits)
Measuring TimeGeneral Normal is 6 s
Maximum Voltage24 V, Over Over 24 V No Start-up Measurement
Maximum OverloadUrms Maximum = 250 V
Measuring Methodcan per IEC61557-4 Current - Voltage Measurement
Measuring VoltageDC 20 V
Current250 mA DC
Measuring Value Typeto at Extreme Measurement, can Length H, S, ES Test Lead and not Origin Additional Error. / Test Lead E in Resistance > 1 Ω when, can Guide 5m Ω / Ω Additional Error.
Measuring Range0.020 Ω to 300 kΩ
Display Range0.001 Ω to 2.999 Ω
Resolution0.001 Ω
Accuracy±(of reading 2% + 2 Digits)
Operation Error±(of reading 5% + 5 Digits)
Measuring SeriesApprox. 2 times Measurement / s
Measuring TimeGeneral Normal is 4 s, Package Extreme Property Rotation (two Extreme or Extreme)
Maximum VoltageDC or AC Voltage ≤3 V, Over Over 3 V No Start-up Measurement
Maximum Rate2 Henry
Maximum OverloadUrms = 250 V
Measuring Value TypeR Display = R Measurement - R Compensation ²
Level DigitRA Extreme (Dual Clamp Port, No )
Resolution0.001 Ω to 0.1 Ω
Measuring Range0.02 Ω to 199.9 Ω
Accuracy±(of reading 7% + 3 Digits)
Operation Error±(of reading 10% + 5 Digits)
Measuring VoltageVm = 48 V AC ( class Voltage)
Measuring Frequency128 Hz
Noise Current (IEXT)Maximum IEXT = 10 A(AC)(RA < 20 Ω)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

The ground resistor test Fluke 1625-2 uses only the plier to measure the ground circuit resistance. Each clamp is connected to the test. No need to use the earthmark. One of the clamps is known to be fixed and the other to measure the current. Then the tester automatically determines the resistance of the ground rod._ This test method is only applied in the case of a site system in the building or building under observation, although it is the case in most cases. if there is only one access point, as is used in many residential applications, no test method can provide an acceptable value._ When a test is taken, it is not necessary to break the stick - it is sufficient to maintain the integrity of the combined system in the test. it is no longer necessary to spend time putting and connecting the ground poles on the system. You can also perform site tests, including inside buildings, cable towers, or any location where you cannot access the land.?_._. The full-scale tester Fluke 1625-2 is a unique local tester. All four types of feed can be completed: Tripodes and quadruple-level reduction (using earthmarks) 4polar soil resistance tests (using earthmarks) Selective tests (using earthmarks and 1 pliers) No test (only so) Use 2 plier)Screaks

Key Advantages

  1. Triode and quadruple drop-down ground resistance circuit tests
  2. Four-polar soil resistance testCharlie
  3. Selective ground rod test using 1 pliersScrets
  4. Unplugged ground rod test using 2 pliers
  5. IP56 Protection Level for outdoor use
  6. Hard carry box
  7. USB Data Storage and Transfer

Category Description

Installation and transport of PV stations covering the I-V curve tests, insulation tests and infrared screening.ScretsScrellageScrell

Applied industry & test project

FAQ

Q: What can the FLUKE Fluke 1625-2 Solar Industry Tool do? Q: What can the main solar industry tool be? Q Q1

A: FLUKE Fluke 1625-2 Solar Industry Tool is a solar industry tool product of FLUKE Fluke. X-. XZX . XS. XS. XS. S. X XS. X X The main functions listed officially include: a triode and quadruple-level drop-off ground resist circuit test; a tetrapolar soil resistance test; and a selective ground rod test using 1 pliers. Survey object and process requirements can be provided and confirmed with cloudy assistance

Q: What are the key technical indicators for 1625-2? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q

A: This page parameter table has been compiled by official information and contains a total of 120 items,.A.Signatures For more detailed accuracy and environmental conditions, please refer to the official manual, and please refer to the official manual. This page is not open article by article.!. Reference: 0 V, UST

Q: How can the selection and the cargo date be confirmed?!

A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff

Q: What is the type of solar energy industry tool for FLUKE Fluke 1625-2? What are the scenarios that apply?

A: This product is a solar industry tool (FLUKE Fluke/ Solar industry tool).-to-PV station installation and transport, covering I-V curve testing,Screak testing,Screaking,Screeching, and Powering.SceneScreakingsSceness.Scenes.s.scenes.s.scenes.s.Scope and wiring Insulation testing and infrared screening.!?

Q: How can technical support be obtained after purchase?!

A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

FLUKE 381
FLUKE

FLUKE 381

381
└ Solar PV Tools
FLUKE 376 FC
FLUKE

FLUKE 376 FC

376 FC
└ Solar PV Tools
FLUKE 365
FLUKE

FLUKE 365

365
└ Solar PV Tools
FLUKE 393 FC
FLUKE

FLUKE 393 FC

393 FC
└ Solar PV Tools
FLUKE BT508/BT510/BT520/BT521
FLUKE

FLUKE BT508/BT510/BT520/BT521

BT508/BT510/BT520/BT521
└ Solar PV Tools
FLUKE 1587C FC
FLUKE

FLUKE 1587C FC

1587C FC
└ Solar PV Tools