FLUKE 1770 (Model 1770) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 1770 — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Input Quantity | 4 Circuit Input, Phase to at PE three Phase and Zero Wire (5 pcs Connection Device) |
|---|---|
| Measuring Category | 1000 V CAT III / 600 V CAT IV |
| Maximum Input Voltage | 1000 V rms / 1000 V dc (1700 Vpk) |
| Rated Voltage Range | and Single Phase: can (50 V – 1000 V) / three Angle : can (100 V – 1000 V) / Nominal Voltage Compliant with IEC 61000-4-30 A Class Standard (Vdin) 100 V – 690 V |
| Input | 10 MΩ(P-P and P-N ), 5 MΩ(P-PE and N-PE ) |
| Bandwidth | DC, Height up to 30 kHz, Use at Power Quality Measurement, not Package |
| Resolution | 24 digits Same Sampling |
| Sampling Rate | 50 / 60 Hz when is 80 kS / s |
| Zoom | 1:1, can , Use at Voltage Device |
| Measuring Range | ±8 kV |
| Sampling Rate | 1775:1 MS / s / 1777:1 MS / s、20 MS / s |
| Bandwidth | DC to 1 MHz |
| Trigger Device | Adjustable Trigger Logic Level. Height Division Quantity above Trigger Device > 1.5 kHz |
| Resolution | 14 digits Same Sampling |
| Input Quantity | 4 Circuit Input (three Phase and Zero Wire), is Phase Connection Sensor Automatic Selection Range |
| Range | AC 1 A to 1500 A, Operating i17XX-FLEX1500 12 / 1 A to 1500 A, Operating i17XX-FLEX1500 18 / 1 A to 1500 A, Operating i17XX-FLEX1500 24 / 3 A to 3000 A, Operating i17XX-FLEX3000 24 / 6 A to 6000 A, Operating i17XX-FLEX6000 36 / 40 mA to 40 A, Operating Clamp Clamp i40s-EL / 4 A to 400 A, Operating Clamp Clamp i400s-EL |
| Range DC | supports DC Current, Operating Single Fluke DC Current Clamp and Single Current Clamp Adapter Accessories |
| Bandwidth | DC to 30 kHz |
| Resolution | 24 digits Same Sampling |
| Sampling Rate | 50 / 60 Hz when is 80 kS / s |
| Zoom | 1:1, can |
| Input Voltage | Clamp Clamp: 50 mV / 500 mV rms; CF 2.8 / Wire Revolution: 15 mV / 150 mV rms @ 50 Hz, 18 mV / 180 mV rms @ 60 Hz; CF 4 / All is Nominal Probe Range |
| Input | 11 kΩ |
| Input Quantity | 2 |
| Input Range | DC: 0 V dc to ± 10 V dc / 0 V to 1000 V dc |
| Input | DC: 2.92 MΩ |
| Than Number | division Type: mx + b(Increment and Shift) User can Configuration |
| Display Unit | User can Configuration (most Length 8 digits , e.g. such as°C, psi or m / s) |
| Input Power Supply Frequency | DC, 50 / 60 Hz 15%(42.5 Hz … 57.5 Hz, 51 Hz … 69 Hz) |
| Specification | 1-φ, 1-φ IT, Division Phase, 3-φ three Angle , 3-φ IT, 3-φ Aron / Blondel(two Element three Angle ), 3-φ three Angle Open Type Division pcs, 3-φ Height Division pcs three Angle |
| Data Storage | Fluke 1773 / 1775: 8 GB internal (can Operating microSD Caliper Large internal ) / Fluke 1777: 32 GB microSD Caliper ( Installation) |
| Internal Capacity | Typical Value: 10 pcs is 8 , Interval is 1 minutes and 100 pcs pcs Recording . / Available Recording Number and Recording Period Depends on User requires |
| Real-time Accuracy | internal Part: 3 ppm(per 0.26 s, per months 8 s) / NTP( Time): According to , General Normal < 0.1 s, Phase to at Adjustment when (UTC) / GPS: < 1 ms, Phase to at Adjustment when (UTC) |
| Measuring Parameter | Operating Manual |
| Interval | User optional: 1 s, 3 s, 5 s, 10 s, 30 s, 1 min, 5 min, 10 min, 15 min, 30 min |
| Average Interval, Minimum Value / Maximum Value | Voltage, Current: ½ Period RMS(20 ms @ 50 Hz, 16.7 ms @ 60 Hz) / Aux, Power: 200 ms |
| Total | at 50 Harmonic Meter Calculation Voltage and Current Total Harmonic (THD) |
| Measuring Parameter | Operating Manual |
| Specification | h0 … h50 / Voltage, Current and Power% Wave and RMS / Voltage and Current Phase digits Angle, Height up to h11 |
| Specification | ih0… ih50 / Voltage and Current% Wave and RMS |
| Specification | 2–9 kHz, 200 Hz Frequency points / 9–30 khz, 2 kHz Frequency points / Voltage and Current RMS |
| Measuring Method | According to IEC 61000-4-7, Division groups Harmonic, groups Harmonic and Single times Harmonic bin. / According to Configuration Power Quality Standard Automatic Selection Method or User can Configuration. |
| Total | According to Multi up to 50 times Harmonic Meter Calculation (Depends on Setting Power Quality Standard) |
| Power Supply Signal | 2 pcs Frequency, Range from 110 Hz to 3000 Hz |
| Part | Voltage , , , Voltage , Power Supply Signal, Wave Deviation, |
| Part Current | Current |
| Trigger Recording | Voltage and Current Half Period RMS Continuous 10 s / 10 / 12 Period Voltage and Current Wave / Power Supply Signal: Power Supply Signal Voltage 200 ms RMS, most Length 120 s / : Voltage Wave / (Fluke 1777: 1 MS / s or 20 MS / s, 500000 pts; Fluke 1775: 1 Ms / s, 25000 pts) |
| Power Supply | IEEE 1459 |
| Specification | IEC 61000-4-7: Class 1 / IEEE 519( when and Over when Harmonic) |
| Specification | IEC 61000-4-15 F1 Class |
| Power Quality | IEC 61000-4-30 A Class, IEC 62586 PQI-A-PI |
| Power Quality | EN 50160 + GOST + NEQUAL + NETCODE + FOL |
| Specification | 1 Gbit / s 1000BASE-T |
| USB A Type | USB 2.0 Height U Disk, Use at Transfer Measurement Data, pcs more New and can Installation. Maximum Power Supply Current: 500 mA |
| USB-C | USB 2.0 Height , Use at will Data under to PC and Calibration (requires USB A Type Rotation USB-C or USB-C Rotation USB-C Cable) / Analysis Instrument Power Supply (requires USB C AC Adapter, supports PD 2.0 or more Height Version This Protocol, supports 9 V 1.8 A) / USB 3.0 Over Height , Use at USB-C Disk, Use at Transfer Measurement Data, pcs more New and can Installation. Maximum Power Supply Current: 900 mA |
| WiFi / BLE 1 | 802.11 ac 2.4 GHz / 5 GHz, supports and Connection points and Terminal Mode / Bluetooth 5.0 / BLE / Wire: built-in and external 2 |
| GPS | MCX Connection Device, Use at Connection GPS / GLONASS2 GNSS Wire |
| Parameter | Range Resolution Reference Conditions under with Accuracy / of reading% + Full Scale% |
| Voltage | 1000 V 0.1 V Nominal Voltage 0.1% / Compliant with / IEC 61000-4-30 A Class Standard 1,2 / ±(0.04% + 0.004%)3 |
| Voltage and | - 0.1 V Nominal Voltage 0.2%1,2 |
| Voltage | ±8 kVpk - ±5 % +0.25 %) |
| Voltage / | 100% 0.1% / 0.1 mV ≥1% Nominal Voltage 1: of reading ±2.5% / <1% Nominal Voltage 1: ±0.025 Nominal Voltage |
| Voltage Total | 100 % 0.1 % / 0.1 V ±(2.5 % + 0.5 %) |
| Voltage 2-9 kHz | Maximum 100 V 0.1 mV ±(2.5% + 0.1 V) |
| Voltage 9-30 kHz | Maximum 100 V 0.1 mV ±(2.5% + 0.1 V) |
| Current / ( Clamp Mode) | Operating iFlex 1500 A, / i17XX-FLEX1500 18 150 A / 1500 A 0.01% / 0.1 A ±(1% + 0.02%) |
| Current / ( Clamp Mode) Operating iFlex 3000 A, / i17XX-FLEX3000 24 | 300 A / 3000 A 0.01 A / 0.1 A ±(1 % + 0.03 %) |
| Current / ( Clamp Mode) Operating iFlex 6000 A, / i17XX-FLEX6000 36 | 600 A / 6000 A 0.1 A / 1 A ±(1.5 % + 0.03 %) |
| Current / ( Clamp Mode) Operating AC Clamp 40 A, / i40s-EL | 4 A / 40 A 0.001 A / 0.01 A ±(0.7 % + 0.02 %) |
| Current / ( Clamp Mode) Operating AC Clamp 400 A, / i400s-EL | 40 A / 400 A 0.01 A / 0.1 A ±(2 % + 0.2 %) / ±(0.7 % + 0.1 %) |
| Current / ( Clamp Mode) Operating AC / DC Clamp / 2000 A, 80i-2010s-EL | 200 A / 2000 A 0.01 A / 0.1 A ±(0.8 % + 0.2 %) |
| Current Minimum Value / Maximum Value | 100% by Accessories Setting with Accuracy x2 |
| Current / | 100% 0.1% / 0.01 A ≥3% Nominal Current: of reading ±2.5% 4 / <3% Nominal Current: Nominal Current ±0.15% |
| Current Total | 100 % 0.1 % ±(2.5 % + 0.5 %) |
| Frequency | 42.5 Hz … 69 Hz 0.001 Hz ±0.01 Hz |
| Voltage | 100 % 0.1 % ±0.15 % |
| Current | 100 % 0.1 % ±0.15 % |
| Pinst, Pst, Plt | 0 to 20 0.01 5% |
| Power Supply Signal Voltage | Height up to 3 kHz / Nominal Voltage 0-15% 0.1 V / 0.1% 1-3% Nominal Voltage: Nominal Voltage ±0.15% / 3-15% Nominal Voltage: of reading ±5% |
| AUX Input | ±10 V 0.1 mV ±(0.2 % + 0.05 %) |
| Parameter | DC Input 1 Clamp Clamp i40S-EL |
| Power Range W, VA, Var | Clamp Clamp: 50 mV / 500 mV / : 15 mV / 150 mV 4 A / 40 A |
| Power Range W, VA, Var Clamp : 50 W / 500 W / : 15 W / 150 W | 4k W / 40 kW |
| Maximum Resolution W, VA, Var | 0.1 W 1 W / 10 W |
| Phase Digit (Voltage to Current)1 | ±0.2° ±1° |
| Parameter | iFlex 1500A,I17XX-FLEX1500 18 iFlex 3000A,I17XX-FLEX3000 iFlex 6000A,I17XX-FLEX6000 |
| Power Range W, VA, Var | 150 A / 1500 A 300 A / 3000 A 600 A / 6000 A |
| Power Range W, VA, Var 150 kW / 1.5 MW | 300 kW / 3 MW 600 kW / 6 MW |
| Maximum Resolution W, VA, Var | 0.1 kW / 1kW 1 kW / 10 kW 1 kW / 10k W |
| Parameter | I17XX-FLEX1500 18 I17XX-FLEX3000 I17XX-FLEX6000 |
| with Power P | PF ≥ 0.99 150 A / 1500 A 300 A / 3000 A 600 / 6000A |
| with Power P 1.2% + 0.005% | 1.2 % + 0.0075 % 1.7 % + 0.0075 % |
| with Electric Ea | 0.1 ≤ PF < 0.99 (1.2+√(1-PF2) / (2 PF)) % + 0.005 % (1.2+√(1-PF2) / (2 PF)) % + 0.0075 % (1.7+√(1-PF2) / (2 PF)) % + 0.0075 % |
| at Power S / at Quantity Eap | 0 ≤ PF ≤ 1 1.2 % + 0.005 % 1.2 % + 0.0075 % 1.7 % + 0.0075 % |
| No Power Q / No Electric Er | 0 ≤ PF ≤ 1 Measure at Power / Electric Energy 2.5% |
| Additional Not Accuracy / (Power Height Range%) | VP-N > 250 V 0.02 % 0.02 % 0.02 % |
| Phase Digit (Voltage to Current) | - 0.28° 0.28° 0.28° |
| Warranty Period | Analysis Instrument: 2 years (excl. battery) / Accessories: 1 years (incl. battery) |
| Calibration Period | 2 years |
| Dimensions (Length X Width X Height) | 28.0 cm x 19.0 cm x 6.2 cm (11.0 in x 7.5 in x 2.4 in) |
| Weight | 2.1 kg (4.6 lb) |
| Protection | Kensington Protection Applicable Groove |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature Range | -20°C to 60°C |
| Operating Humidity | IEC 60721-3-3: 3K5( Version): / -10°C to 30°C: ≤95%, non-condensing or / 35°C: 70% / 40°C: 55% / 50°C: 35% |
| IP Class | IEC 60529:IP50 |
| Vibration | IEC 60721-3-3 / 3M2 |
| Voltage Range | 100 V – 600 V -15 % / +10 % (85 V … 660 V) |
| Power Consumption | Maximum 40 VA |
| Power Supply Frequency | 50 / 60 Hz (42.5 Hz … 69 Hz) |
| Not Power Supply | Lithium-Ion Battery BP1770, Tool with more Large Temperature Range, Replaceable / Battery Power Supply Time: 1.5 hours |
| Specification | IEC 61010-1: Pollution Degree 2 |
| Power Supply | Over Voltage CAT IV 600 V / with with AC Adapter MA-C8: Over Voltage CAT II 300 V |
| Measuring | IEC 61010-2-030:CAT IV 600 V、CAT III 1000 V |
| Altitude 2000 M to 4000 M | to: / Power Supply: CAT IV 300 V / with with MA-C8 Adapter: CAT II 150 V / Measurement: CAT IV 300 V, CAT III 600 V, CAT II 1000 V |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Specifications: EN 50160 IEC 61000-2-2 IEC 61000-4-30 V/CAT Wi-Fi Fluke 8 kV 30 kHz 1MHz 20MHz 1000 V 1770 500 2 1 1730 1740 519 33073 1775 1777 600 1773 3 90 PC LTE USB IEEE GOST PQDIF CSV CAT IV III GPS ELC. Please contact our engineers for the full technical wording. Reference values: 1770, 30, 50160, 519, 1775, 1777.
Installation and transport of PV stations covering the I-V curve tests, insulation tests and infrared screening.ScretsScrellageScrell
Q: What can the FLUKE Fluke 1770 Solar Industry Tool do? Q: What can we do?sSwfSw
A: FLUKE Fluke 1770 Solar Industry Tool is a solar industry tool product for FLUKE Fluke. he main functions listed officially include: automatic measurement of power and electrical quality parameters; fast-tracking of failure-disposal when the power quality is visible; and easy access to V/A/Hz, power, surge, and boost to harmony wave data. — If the type is selected according to working conditions, the measurement object and process requirements may be provided and confirmed with cloud assistance
Q: What are the key technical indicators for 1770?
A: The list of parameters for this page is organized by official information and contains 118 items covering voltage input/voltage transient/ current input/Aux input. For more detailed accuracy and environmental conditions, please refer to the official manual. This page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the type of solar energy industry tool for FLUKE Fluke, and which scenes are it?. Reference: 1770
A: This product is a solar industry tool (FLUKE Fluke/ Solar industry tool).-to-PV station installation and transport, covering I-V curve testing,Screak testing,Screaking,Screeching, and Powering.SceneScreakingsSceness.Scenes.s.scenes.s.scenes.s.Scope and wiring Insulation testing and infrared screening.!?
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
Reference values from the original datasheet: 519, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1770, 1775, 1777, 50160.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.