FLUKE 279FC (Model 279FC) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 279FC — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Basic DC Accuracy | 0.09% |
|---|---|
| Bandwidth | 1% 45 Hz to 65 Hz, Full when Range Low General Filtering Device |
| Voltage | 1000 V AC / DC |
| AC Current | iFlex Property Current Probe (with 279 FC / iFlex Provided) |
| Resistance | 50 MΩ |
| Frequency | 100 kHz |
| Capacitance | 9,999 µF |
| (with Buzzer) | with |
| Diode Test | with |
| Minimum Value / Maximum Value Recording | with |
| Display Hold | with |
| Infrared Resolution | 102 x 77 |
| Image Frequency | 8 Hz |
| Field of View | 36° (w) x 27° (h) |
| NETD | ≤200 mK |
| Infrared Light with | 7.5 to 14 Micro m |
| in Point | Yes (with in points Temperature) |
| Focus Unit | Setting |
| Temperature Range (Optional °C and°F) | -10°C to 200°C(14°F to 392°F) Accuracy: ±5°C (9°F) or (Test ±5%) |
| Rate | 0.95 Fixed |
| Compensation | 20°C Fixed |
| Internal Memory | Approx. 100 Image (internal Part) |
| Part Division Type | Non- Radiation.is2 |
| Battery Type | can Charging Battery (Charging Time: 4.5 hours) |
| Operating Temperature | -10°C to 50°C(14°F to 122°F) |
| Storage Temperature | -20 ºC to 60 ºC(-4°F to 140°F) |
| Relative Humidity | 0% to 90%(0°C to 35°C)(32°F to 95°F) / 0% to 75%(35°C to 40°C)(95°F to 104°F) / 0% to 45%(40°C to 50°C)(104°F to 122°F) |
| Altitude | 2000 m (6,561 ft) |
| Temperature Coefficient | Temperature Over Over 28°C or Low at 18°C when (Over Over 82°F or Low at 64° F when), Temperature per Height or Low 1°C, Gauge Setting Accuracy Value above Adjustment 0.1 x |
| IP Rating | (IP) IP40(not Operating when) |
| Wireless Frequency | 2.4 GHz ISM with, 20 m Range |
| Certification | CE、CSA、FCC |
| Compliant Safety Standard | IEC 61010-1: Pollution Degree 2 class; IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V |
| EMC Compatibility (EMC) | EN 61326-1:2012 |
| Dimensions | 215.9 x 93.9 x 57.1 mm (8.5 x 3.7 x 2.25 in) |
| Weight | 0.793 kg (1.75 lb) |
| Warranty Period | with Limit three years Warranty |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
FlukeWZQ1 More work is done in a safer way to communicate wirelessly with smartphones not exceeding 20 feet/6.1 m (at barrier-free) So saving measurements and images can better remove malfunctions by immediately analysing trends and monitoring real-time measurements on your mobile phone screen, creating them on site and sending reports via e-mail.?.?.? Flukein has a nar Live video talk function, and the video is available in the public domain. This function displays real-time video and measurements on the same screen, measuring the ability to communicate and direct current voltage at 2500 A, which measures the flow of communication up to 2500 A (by the iFUS flexible currents selected)_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Temperature range - 10 °C to 200 °C (14 °F to 392 °F) Disruptions can be measured up to 50 M timesScreen XVC XC XC XC XC XC XC XC XCV XCV XV XV XV XV XC XC XC Diode testing Minimal and max record function automatically captures changes in readings Frequency 9999 mF capacitation measure that accurately measures real-value active voltage and currents of non-linear signals 1 IV 600 V, CAT III 1000 V Security Measurement Levels Chargable Lithium Battery and Charger 3 years warranty (selection) to help you hang the meter when using the probe Found..! Saves. Shares. The Fluke 279 FC economics multi-purpose cytoscope helps you quickly to discover, repair, verify and report electrical problems, giving you confidence to solve any problems. The HID is a first-line failure diagnostic tool for electrical equipment, which can be used to check the heat points of high voltage equipment and transformers, and to detect heat exposure to fuses, wires, insulations, connectors, collage and switches._ Scanning with a 279 FC imager can quickly detect electrical problems at a safe distance. By combining the two tools into one tool, the HID table can reduce the burden. Improves efficiency. More functionality compatible with iFex, expands your measurement function and can go deep, narrow, The hard-to-reach spatial measurement current (up to 2500 A exchange current) uses a wide colour full-colour LCD display that allows you to view images and readings more easily and clearly._ The rechargeable battery that lasts more than 10 hours allows you to use it for a full day in normal working conditions. the transmission measurements, with the help of the built-in Fluke, the power of the battery, the power of the battery, the power of the battery, the power of the battery, the power of the ship, the power of the ship, the power of the ship, the power of the ship, the power of the ship, the power of the ship, the power of the ship, the power of the ship, You can quickly report and verify the results by transmitting them to your cell phone. by immediately analysing trends and monitoring real-time measurements on your smartphone screen._ Creates and sends reports on site and via e-mail.!. Reference: Fluke, 1000 V, CAT
Electrical parameters such as voltage, currents, resistance are used as the basic tools for electrical installation, equipment repair and discharge; the selection is primarily concerned with the validity of the values, CAT security level, accuracy and bandwidth
Q: FLUKE Fluke 279 Q50 digital table. What can we do? Qq
A: FLUKE Fluke 27960 digitally-based table of digitally-sized products of FLUKE Fluke. The main functions listed officially include: co-initiating thermal imaging, and also using thermo-based image. Q.S Massive and clamp-sheet functions with high value for money; 15 measurements, including: exchange voltage (with low-speed filters), straight current voltage, resistance, conductivity, capacitors, diode detection, Minimum / Max / average, exchange currents (through iFex flexible current probes), frequency; with thermal imaging, many electrical problems can be detected quickly and safely without time-consuming testing and validation. If the type is selected according to working conditions, the measurement object and process requirements may be provided and confirmed with cloud assistance. Reference values: 279.
Q: What are the key technical indicators for 279 FC? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q
A: This page is based on official information and contains a total of 37 items covering DMM/Infrared Heat Imager/General Technology Indicators. More detailed accuracy and environmental conditions are specified in the official manual, which is not open on the page..A: This page is a table of parameters, which is based on official information..S.SSSS
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the FLUKE Fluke digitized table for 27960? What are the scenarios?. Reference values: 279.
A: This product is a digitally-owned table (FLUKE Fluke/ Digitally-based table). It is used for measuring electrical parameters such as voltage, currents, resistance and is a basic tool for electrical installation, equipment repair and discharge; The selection is primarily concerned with valid values, CAT security level, accuracy and bandwidth
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.