FLUKE 117 Multimeter Tool Kit (Model 117) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 117 digital multimeter kit, 600 V CAT III, 6,000-count display, 11 A fuse, -10 to +50 C operating range.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Maximum Voltage between Any Terminal and Ground | 600 V |
|---|---|
| Over Voltage Protection | 6 kV Peak, Compliant with IEC 61010-1 600 VCAT III, Pollution Degree 2 Gauge Setting |
| A Input Terminal | 11 A, 1000 V Type (Fluke PN 803293) |
| Display | Number digits Type: 6,000 counts, per s more New 4 times |
| Records | 33 Range, per s more New 32 Range |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +60°C |
| Battery Type | 9 V Alkaline Battery, NEDA 1604A / IEC 6LR61 |
| Battery Life | General Normal is 400 hours, No Backlight Lamp |
| DC Voltage (Millivolt) | Range / Resolution 600.0 mV / 0.1 mV |
| DC Voltage (Millivolt) Accuracy | ±([Reading%] + [Counting]): 0.5% + 2 |
| DC Voltage | Range / Resolution 6.000 V / 0.001 V / 60.00 V / 0.01 V / 600.00 V / 0.1 V |
| DC Voltage Accuracy | ±([Reading%] + [Counting]): 0.5% + 2 |
| Automatic Voltage | Range / Resolution 600.0 V / 0.1 V |
| Automatic Voltage Accuracy | 2.0% + 3(DC, 45 Hz to 500 Hz) / 4.0% + 3(500 Hz to 1 kHz) |
| AC Voltage (Millivolt)¹ True RMS | Range / Resolution 600.0 mV / 0.1 mV |
| AC Voltage (Millivolt)¹ True RMS Accuracy | 1.0% + 3(DC, 45 Hz to 500 Hz) / 2.0% + 3(500 Hz to 1 kHz) |
| AC Voltage ¹ True RMS | Range / Resolution 6.000 V / 0.001 V / 60.00 V / 0.01 V / 600.0 V / 0.1 V |
| AC Voltage ¹ True RMS Accuracy | 1.0% + 3(DC, 45 Hz to 500 Hz) / 2.0% + 3(500 Hz to 1 kHz) |
| Specification | Range / Resolution 600 Ω / 1 Ω |
| Accuracy | Buzzer Open 250 Ω when, Buzzer Detection 500 μs or more Length Time Open Circuit or Circuit. |
| Ohm | Range / Resolution 600.0 Ω / 0.1 Ω / 6.000 kΩ / 0.001 kΩ / 60.00 kΩ / 0.01 kΩ / 600.0 kΩ / 0.1 kΩ / 6.000 MΩ / 0.001 MΩ |
| Ohm Accuracy | 0.9% + 1 |
| Ohm Range / Resolution | 40.00 MΩ / 0.01 MΩ |
| Ohm Accuracy | 5% + 2 |
| Diode Test | Range / Resolution 2.00 V / 0.001 V |
| Diode Test Accuracy | 0.9% + 2 |
| Capacitance | Range / Resolution 1000 nF / 1 nF / 10.00 μF / 0.01 μF / 100.0 μF / 0.1 μF / 9999 μF / 1 μF / 100 μF to 1000 μF |
| Capacitance Accuracy | 1.9% + 2 |
| Capacitance Range / Resolution | > 1000 μF |
| Capacitance Accuracy | 5% + 20% |
| Lo-Z Capacitance | Range 1 nF to 500 μF |
| Lo-Z Capacitance Accuracy | 10% + 2(Typical Value) |
| AC Current (Ampere) True RMS (45 Hz to 500 Hz) | Range / Resolution 6.000 A / 0.001 A / 10.00 A / 0.01 A |
| AC Current (Ampere) True RMS (45 Hz to 500 Hz) Accuracy | 1.5% + 3 / 20 A Continuous Overload (up to 30 s) |
| DC Current (Ampere) | Range / Resolution 6.000 A / 0.001 A / 10.00 A / 0.01 A |
| DC Current (Ampere) Accuracy | 1.0% + 3 / 20 A Continuous Overload, up to 30 s |
| Hz(V or A Input)2 | Range / Resolution 99.99 Hz / 0.01 Hz / 999.99 Hz / 0.1 Hz / 9.999 Hz / 0.001 Hz / 50.00 Hz / 0.01 Hz |
| Hz(V or A Input)2 Accuracy | 0.1% + 2 |
| Dimensions | 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in) |
| Weight | 550 g |
| Warranty Limit | 3 years |
| Screw Blade Type | Blade Length / (in / mm) Length / (in / mm) Width / (in / mm) Blade Diameter / (in / mm) |
| Digit Head | 3 / 75 3-3 / 8 / 86 1 / 25 3 / 32 / 2.55 |
| Digit Head | 4 / 100 3-11 / 16 / 94 1 5 / 16 / 30 5 / 32 / 4.0 |
| Digit Head | 5 / 125 4-3 / 16 / 106 1 7 / 16 / 36 1 / 4 / 6.0 |
| 1 No. Digit Head | 3 / 80 3-11 / 16 / 94 1 3 / 16 / 30 7 / 32 / 5 |
| 2 No. Digit Head | 4 / 100 4-3 / 16 / 106 1 7 / 16 / 36 1 / 4 / 6 |
| Type | Nominal Length (in) Nominal Length (mm) |
| Nozzle | 8 200 |
| Nozzle | 8 200 |
| Steel | 8 200 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Fluke 117 Electrician's Man-Wise Table + Insulation Manual Tool Introduction Toolkit containing the usual screwdriver, plier and cutcuff. The Fluke 117 digital scale is a real-value instrument whose non-contact voltage detection function helps to expedite the completion of the work. Fluke 117 is the ideal choice for electricians with automatic voltage and LoZ functions that help prevent errors in reading from the deflator. Fluke 117 provides the minimum/maximum/average reading and measures frequency and capacitation. Insulation manual tool introduction kit contains a single-word screwdriver of three specifications. 1 and 2 cross-cutting screws. Slips, slants, and steel wires. All tools are made of chromium (CMV) steel..ScreechsScres.s.s.s.s.s.s.Scres.SS All tools are certified with 1000 V AC and 1500 V DC voltage. All tools have limited lifetime security._ Fluke 117 Powerworker's Notebooks, which integrates the accurate and easy to use of the technical version of the ltAlertTM, are used to create a new technology for the use of the Internet.sStampsTreattAlertTMTreats the use of the Internet For non-contact voltage detection with the NVT automatic communication/direct current volts selection function Low input resistance to prevent error in reading due to the vacuum voltage Sample large-sized white LED backlights, A suitable use in a region with poor light has a real value function.! A precise measurement of non-linear loads, a single-word screwdriver, three-shaped blades, three-long crossbow screws, 1 and 2-heads, two-long handles, sideblades and sharp-mouth clamp in the holding area, unique, A slashed wave zone with 4 holding points for pulling round objects, holding large and not smoothing straight, semi-circle, long-clack and thin rollers, unique side blades, The power-cutting wires, high-lear tilt pliers, hard materials like steel, piano wire, power connections and precision blades, steel-coated clamps, with sharp sawing clamps and 4 dots, tight-locking external fibres, long-formed, long-formed, long-formed, long-spanned, long-spanted, long-spanned, long-spanned, long-spanned, long-spanned, long-spanted, long-spanted, It's easy to cut wires in small spaces, and it's hard to plier, and it's lighter than any other design. Reference: 20
The insulation hand tool is used for the tight and cutting in the electrical environment and meets the IEC 60900 insulation criteria..ssssss
Q: The FLUKE Fluke 117 Toolkit Insulation Tool What Can Be A Mainly Do?
A: FLUKE Fluke 117 Toolkit Insulation Tool is a FLUKE Fluke insulation tool product.sFlukeT QTWWW XS. QTKS. QTK QTKSKSSSS The main functions listed officially include: Fluke 117 electrician's list; 3's "slash" with the word "slash"; 2's "slash" with the cross with the "slash".s are selected according to the working conditions. Survey object and process requirements can be provided and confirmed with cloudy assistance
Q: What are the key technical indicators for the 117 Toolkit?!?
A: This page is based on official information and contains a total of 53 items covering precision technical indicators/mechanisms and generic specifications. More detailed accuracy and environmental conditions are set out in the official manual, and this page is not article by article..A: This page is based on official manuals and does not have an article by article.SSS
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the FLUKE Fluke 117 Toolkit Insulation Tool? What are the scenarios?
A: This product is an insulation tool (FLUKE Fluke/ insulation tool). The insulation hand tool is used to secure and cut in electrical environments and meets the IEC 60900 insulation criteria
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.