Home › Products

Product Overview

FLUKE 376 FC Clamp Meter Tool Kit (Model 376 FC) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 376 FC clamp meter kit, 999.9 A AC through the clamp and 2500 A AC with the flexible probe, 0.1 A resolution.

Brand: FLUKE | Category: FLUKE

Sales Inquiries: 15626018696 · 78403603@qq.com

FLUKE 376 FC Clamp Meter Tool Kit

Technical Specifications

Range999.9 A
Resolution0.1 A
Accuracy2% ± 5 digits (10 Hz to 100 Hz)
Number (50 Hz / 60 Hz)3 @ 500 A
Range2500 A
Resolution0.1 A (≤ 600 A)
Accuracy3% ± 5 digits (5 – 500 Hz)
Number (50 / 60Hz)3.0(1100 A when)
i2500-10 Flexi2500-18 Flex
Optimum Distance0.5 in (12.7 mm) 1.4 in (35.6 mm)
Error±0.5 % ±0.5 %
Optimum Distance0.8 in (20.3 mm) 2.0 in (50.8 mm)
Error±1.0 % ±1.0 %
Optimum Distance1.4 in (35.6 mm) 2.5 in (63.5 mm)
Error±2.0 % ±2.0 %
Range999.9 A
Resolution0.1 A
Accuracy2% ± 5 digits
Range1000 V
Resolution0.1 V (≤600.0 V)
Accuracy1.5% ± 5 digits (20 Hz to 500 Hz)
Range1000 V
Resolution0.1 V (≤600.0 V)
Accuracy1% ± 5 digits
Range500.0 mV
Resolution0.1 mV
Accuracy1% ± 5 digits
Range5.0 Hz to 500.0 Hz
Resolution0.1 Hz
Accuracy0.5% ± 5 digits
Trigger Logic Level5 Hz to 10 Hz, ≥10 A
Range5.0 Hz to 500.0 Hz
Resolution0.1 Hz
Accuracy0.5% ± 5 digits
Trigger Logic Level5 Hz to 20 Hz, ≥25 A
Range60 kΩ
Resolution0.1 Ω (≤ 600 Ω)
Accuracy1% ± 5 digits
Range1000 μF
Resolution0.1 μF (≤ 100 μF)
Accuracy1% ± 4 digits
Maximum Voltage between Any Terminal and Ground1000 V
Battery2 AA,NEDA 15A,IEC LR6
Operating Temperature-10°C to +50°C
Storage Temperature-40°C to +60°C
Operating Humidity - / (< 10°C)≤ 90% Relative Humidity (10°C to 30°C when)
Operating Altitude2,000 m
Storage Altitude12,000 m
Dimensions (Length X Width X Height)249 x 85 x 45 mm
Weight395 g
Jaw Opening34 mm
Current Probe Diameter7.5 mm
Current Probe Cable Length / (to Electric Device Connection Head Length)1.8 m
SafetyIEC 61010-1, Pollution Degree 2
Safety IP ClassIEC 60529: IP30, Non- Operation when
Wireless Electric Frequency Certification FCC IDT68-FBLE IC:6627A-FBLE
StandardIEC 61326-1: Portable Type Electromagnetic Environment, IEC 61326-2-2
(KCC)A Class Device ( and Communication Device)
United States (FCC)47 CFR 15 B Part Division. per No. 15.103 records Gauge Setting, This Product by is Check Device.
Temperature CoefficientHeight at 28°C or Low at 18°C when, degrees Increment plus Specified Accuracy 0.1
DC VoltageMaximum Voltage 1000 V
DC Voltage Accuracy±(0.05% + 1)
DC Voltage Maximum Resolution10 µV
AC VoltageMaximum Voltage 1000 V
AC Voltage Accuracy±(0.7% + 2) True RMS
AC Voltage AC Bandwidth20 kHz, with Low General Filtering Device; 1 kHz when is 3 db
AC Voltage Maximum Resolution0.1 mV
DC CurrentMaximum Current (Ampere) 10 A(20 A, most Length 30 s)
DC Current Current Accuracy±(0.2% + 2)
DC Current Maximum Resolution0.01 µA
AC CurrentMaximum Current (Ampere) 10 A(20 A, most Length 30 s)
AC Current Current Accuracy±(1.0% + 2) True RMS
AC Current Maximum Resolution0.1 µA
ResistanceMaximum Resistance 50 MΩ
Resistance Accuracy±(0.2% + 1)
Resistance Maximum Resolution0.1 Ω
CapacitanceMaximum Capacitance 9,999 µF
Capacitance Accuracy±(1% + 2)
Capacitance Maximum Resolution0.01 nF
FrequencyMaximum Frequency 200 kHz
Frequency Accuracy±(0.005% + 1)
Frequency Maximum Resolution0.01 Hz
Duty CycleMaximum Duty Cycle 99.9%
Duty Cycle Accuracy±(0.2% / kHz + 0.1%)
Duty Cycle Maximum Resolution0.1%
Temperature-200.0 °C – 1090 °C
80 BK-40.0 °C – 260 °C
ElectricMaximum Electric Guide 60.00 nS
Electric Accuracy±(1.0% + 10)
Electric Maximum Resolution0.01 nS
DiodeRange 3 V
Diode Resolution1 mV
Diode Accuracy±(2% + 1)
Duty Cycle RangeAccuracy ±(0.2% / kHz + 0.1%) Range internal
Operating-20°C to +55°C
Storage-40°C to 60°C
Humidity0% – 90% (0 °C – 35 °C)
Operating2,000 m
Over VoltageEN 61010–1 to 1000 V CAT III, 600V CAT IV
UnitUL, CSA, TÜV, VDE Certification
Dimensions201 x 98 x 52 mm(with sets)
Weight355 g
DisplayNumber digits 6000 counts, per s more New 4 times
Display Analog32 Range, per s more New 40 times
Display Frequency19,999 counts, >10 Hz when per s more New 3 times
Warranty LimitWarranty
Battery LifeAlkaline Battery: General Normal Approx. is 400 hours, No Backlight Lamp
Specification1 m Height (per IEC 61010–1:2001)
VibrationAccording to MIL–PRF–28800 to 2 class Instrument Gauge Gauge
Screw Blade TypeBlade Length / (in / mm) Length / (in / mm) Width / (in / mm) Blade Diameter / (in / mm)
Digit Head3 / 75 3-3 / 8 / 86 1 / 25 3 / 32 / 2.55
Digit Head4 / 100 3-11 / 16 / 94 1 5 / 16 / 30 5 / 32 / 4.0
Digit Head5 / 125 4-3 / 16 / 106 1 7 / 16 / 36 1 / 4 / 6.0
1 No. Digit Head3 / 80 3-11 / 16 / 94 1 3 / 16 / 30 7 / 32 / 5
2 No. Digit Head4 / 100 4-3 / 16 / 106 1 7 / 16 / 36 1 / 4 / 6
TypeNominal Length (in) Nominal Length (mm)
Nozzle8 200
Nozzle8 200
Steel8 200

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Product Overview

Fluke 376 FC True-RMS and insulation manual tool introduction kits containing common screws, clamp and cutters. 376 FC clamp-sheet with iFx flexible electrical stream probe,Scrells Realising 1000 A communication and straight current measurements and 2500 A communication and straight current voltage measurements 1000 V, which accurately measure the real value of non-linear signals and currents The Quantum and the understanding of its changing trends, Create and send reports on site via bluetooth connections to. And-and-and-and-and-and-and-and- and--and-and-and- Clear from the arc flash, secure, a single-word screw, three-shaped, three-string, cross-strike, 1 and 2 top two-string, sideblade and a sharp-mouthed area, unique,.Stucked by the XQQ9, 2-strength with the sideblade and the sharp-blacked-blind-blind-blind, 3-blin A slashed wave zone with 4 holding points for pulling round objects, holding large and not smoothing straight, semi-circle, long and thin roller pliers, unique side blades, The power-cutting wires, high-lear tilt pliers, hard materials like steel, piano wire, power connections and precision blades, steel-coated clamps, with sharp sawing clamps and 4 dots, tight-locking external fibres, long-formed, long-formed, long-formed, long-spanned, long-spanted, long-spanned, long-spanned, long-spanned, long-spanned, long-spanted, long-spanted, It's easy to cut wires in small spaces, with a powerful sharp mouth clamp, but lighter than the other designs.!. Reference: Fluke, 20

Key Advantages

  1. Fluke 376 FC pl . Reference: True-RMS
  2. 3, put the word insulation screwdriver
  3. 2, put the cross-head insulation screwr
  4. 3, put the insulation pins on
  5. Insulation tool certified by 1000 V AC and 1500 V DC
  6. Rolling Tool Bag

Category Description

The insulation hand tool is used for the tight and cutting in the electrical environment and meets the IEC 60900 insulation criteria..ssssss

Applied industry & test project

FAQ

Q: FLUKE Fluke 376 FC Toolkit Insulation Tool What can be done predominantly?

A: FLUKE Fluke 376 FC Toolkit Insulation Tool is a FLUKE Fluke insulation tool product. QT:Seams. The main functions listed officially include: a plier table for Fluke 37611ZQ ; a single word-insulation screwdriver for 3; 2 uses the cross-head insulation screws.Stamps are provided for measurement objects and process requirements, with cloud help..ScreechsSceneScreechs. Reference: True-RMS, FC. Reference values: 376.

Q: What are the key technical indicators for the 376 FC Toolkit? Q: What are the key technical indicators?S

A: This page parameter table has been compiled by official information and contains 129 items,.A.Signatures Covers general technical indicators/communication currents/2.5% 5 bit (100-500 Hz)/2.5 @ 600 A. For more detailed accuracy and environmental conditions, please refer to the official manual and this page is not open article by article.!

Q: How can the selection and the cargo date be confirmed?!

A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff

Q: The FLUKE Fluke 376 FC Toolkit Insulation Tool What is the class of goods? What are the scenarios?

A: This product is an insulation tool (FLUKE Fluke/ insulation tool). The insulation hand tool is used to secure and cut in electrical environments and meets the IEC 60900 insulation criteria

Q: How can technical support be obtained after purchase?!

A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

FLUKE Insulated Pliers Tool Kit
FLUKE

FLUKE Insulated Pliers Tool Kit

└ Insulated Tools
FLUKE Insulated Screwdriver Tool Kit
FLUKE

FLUKE Insulated Screwdriver Tool Kit

└ Insulated Tools
FLUKE T6-600/T6-1000 Tester Kit
FLUKE

FLUKE T6-600/T6-1000 Tester Kit

T6-600/T6-1000
└ Insulated Tools
FLUKE Insulated Square-Tip Screwdriver
FLUKE

FLUKE Insulated Square-Tip Screwdriver

└ Insulated Tools
FLUKE Insulated Slotted Screwdriver
FLUKE

FLUKE Insulated Slotted Screwdriver

└ Insulated Tools
FLUKE Insulated Pump Pliers
FLUKE

FLUKE Insulated Pump Pliers

└ Insulated Tools