FLUKE 100 CLKT (Model 100 CLKT) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 100 CLKT — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Water Plate Diameter | 100 mm (3.94 in) |
|---|---|
| Measure Hole Diameter | 89 mm (3.5 in) |
| Measure Hole Region | 6322 mm² (9.79 in²) |
| Thickness | 4 mm (0.16 in) |
| Supported Infrared Wire | with |
| Supported in Infrared Wire | with |
| Supported Length Infrared Wire | with |
| Supported External Wire (UV) | with |
| Supported Can Light | with |
| Supported | with |
| Plus Large Standard (CSA) Certification | with |
| Operating Environment | 3 / 12 Type |
| ANSI C37.20.7 | 50 kA, 60 Hz when 30 pcs Ring |
| EEMACS 14-1 B Type | 40 kA, 60 Hz when 30 pcs Ring |
| IEC 62271 | 20 kA, 50 Hz when 5 pcs Ring |
| Can Ring Humidity | with |
| Can Vibration | with |
| Insulation Material (100°) Resistance | with |
| Insulation Material Pressure (Brinell) Resistance | with |
| Thermal Test 650°C | with |
| Height 11 kV Runtime Device, Chamber Internal or Chamber External | with |
| Maximum Temperature | 250°C (482°F) |
| Maximum Temperature Main Body | 659 °C (1219 °F) |
| Maximum Temperature Optical Part | 1400 °C (2552 °F) |
| Specification | Low (LSF) Type |
| IP Class | IP65 |
| NEMA Class | Type 3 / 12 |
| Vibration Class | IEC60068-2-6 |
| Humidity Class | IEC60068-2-3 |
| Degree | Height up to 630 (1388 ) |
| Warranty Period | to at Control , Replace |
| Origin | New plus |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Save time, more efficient electrical infrared checks, and once you have installed the Fluke infrared window, you will not have to cut off the power source or open the bottom panel door. - may not need to open the panel door. The project is designed to provide a safe and easy inspection. Your investment is not only behind the panel door, but also to consider better protection for electricians, engineers and inspectors who risk their lives every day.!
Installation on closed electrical equipment such as a switchboard allows infrared thermal imaging to be considered in the open
Q: What can the FLUKE Fluke 100 CLKT infrared window do?
Specifications: Fluke FLUKE 100. Please contact our engineers for the full technical wording.
Q: What are the key technical indicators for 100 CLKT? Q: What are the key technical indicators? Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q: Q
A: The list of parameters for this page has been compiled by official information and contains a total of 32 items covering optical component data specifications/KEMA (acrytic test)/ASTA (radio arc test)/TUV. For more detailed accuracy and environmental conditions, please refer to the official manual and this page is not open article by article.!
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the type of infrared window for FLUKE Fluke 100 CLKT? Which scenes are applicable?
A: This product is an infrared window (FLUKE Fluke/ Infrared window). installed on closed electrical equipment such as a switchboard, allowing the infrared thermal imager to see the temperature in the open
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.