SSD OZⅢ-CB ESD Test Equipment (Model OZⅢ-CB) is a ESD Test Equipment supplied by Guangzhou Yunke Electronics Co., Ltd. SSD OZⅢ-CB ESD Test Equipment — ESD Test Equipment · Yunke Electronics. Request a quotation and datasheet.
Brand: SSD | Category: ESD Test Equipment
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | OZⅢ-CB / OZⅢ-CB-TV6 |
|---|---|
| Input Power Supply | DC24V(Supplied AC Adapter, to AC100~240V) |
| Capacity | 7.2VA (ZAPPⅢ Operating when) |
| Working Fluid | Net Air *1 |
| Operating Pressure Range | 0.05MPa~0.6MPa |
| Air Pressure Adjustment Cell Functions | No / with cells Flow Valve |
| Connection Air Management | Outer Diameter φ6 |
| Display | : ZAPPⅢ Normal when points ; : ZAPPⅢ Normal when points |
| Output | MOS FET Electric Device No Voltage b Connection points (ZAPPⅢ Normal Open) |
| Terminal Unit | DC24V OUT: toward External Device Power Supply; INPUT: External Device Signal Input; 0V: Power Supply and External Signal Reference Voltage |
| External Input | Terminal units (DC24V OUT, INPUT, 0V); ZAPPⅢ when INPUT and 0V Circuit, when Open; Input is with Connection points or NPN Body Management Input ( Voltage 3V or less) |
| Maximum Air Flow Quantity (Only Controller) | 450ℓ/min(ANR)/280ℓ/min(ANR) |
| Air Setting | CONT: Continuous; PULSE Hi: Height (10Hz); PULSE Lo: Low (5Hz)*2 |
| Operating Environment | 0~40℃ / 85%RH or less (not Condensation) |
| Body Dimensions | 135×50×75mm(W×H×D) excluding Part |
| Weight | Approx. 530g(only Body)) |
| Supplied Accessories | Operating Instructions, AC Adapter, ZAPPⅢ Connection Wire (2.5m), Grounding Wire, Air Management (2m), Contact (5 pcs) |
| Featured Type | ZAPPⅢ、ZAPPⅢ-H、ZAPPⅢ-C / ZAPPⅢ |
| Optional Accessories | Open : OCB-FSK |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
OZIII-C is a high frequency de-electrication device (control) under the SSD Sixie flag. It is a special control for the SSD. X-X-X-X-X-X-C-Sixie. X-X-Sixiet (SHISHIDO, X-X-X-X-X-X-X-X-X. LTD.) was founded in 1938, a Japanese manufacturer of specialized electrostatic countermeasures, with the original HDC-AC high frequency ionizing technology at its core, with product coverage for de-electrication, dust removal, QuestScene QuestStamps Questsss X-Stampsssss of the Japanese manufacturers of the X The entire series of electrostatic measurements and anti-statistics supplies.!
Structure and working principles:!PIEZONIZER series, using voltage transformers, will press DC24V into high frequency voltage, create high frequency dizziness at the discharge needles, generate ions, and release ions from the nozzle/gun by compressed air, Efficient electricity removal in small volumes; directly internal to the equipment when the high voltage is miniaturized
Product characteristics
• Applied sceneSemiconductor electronics, liquid crystal panels, assembly processes, base plate fittings, testing processes, printing and coating processes, packaging and bundles, resin formation, film, glass, mirrors, dust, non-species, vibration conveyors, proximity,. (c) The production and testing process for static-sensitive manufacturing and testing, such as in provincial spaces
Main specificationsType: OzIII-CB / OzIII-CB-TV6; input power source: DC24V (with AC adapter, corresponding to AC100 240V); XC XV;-Cymium: X-Cymium X-Cymium X-Cymium X-Cymium X-Cymium X Capacity: 7.2 VA (at the time of use of the programme); fluid use: clean air* 1; pressure range: 0.05MPa ~ 0.6MPa; Air pressure modifier function: no/with a throttle; connecting the tube: outer diameter 6; displaying: green: light at normal times at a normal time at a normal time at a normal time; red: light at an abnormal time at an abnormal time at a normal time at a normal time. The full parameters are shown in the following specification table.P
Use and select tipsThe small-calibre nozzle is suitable for loading small spaces or for de-electrifying local points; the gun is suitable for hand-held handling.Air is used in a clean dry air and is used in the range of pressure that is recommended in the instruction.?Appointment
Maintenance and maintenance: clean up with specialized cleaning tools when discharge needles accumulate; keep gas clean and air well in the range of specifications; shut down the gas and power sources before long-term decommissioning.: to the end of the use of the power supply
Guangzhou Yunke Electronics Co., Ltd. provides selective advice, technical information and post-sale support for SSD products such as product catalogues, drawing data (DXF) or technology PDF, which is welcomed by call
Q: Is this a Japanese original?
A: Yes. This is the original Japanese product SHISHIDO EurosatIC (SSD West Sitty), with Guangzhou Yunke Electronics Co., Ltd. for marketing and technical support
Q: How can price and cargo dates be obtained without price?!
A: The price is not displayed on this page. the price and the date of the goods are requested to contact Guangzhou Yunke Electronics Co., Ltd., and we will respond to the model and quantity as soon as possible
Q: What are the requirements for ion generator gas?
A: Please use clean dry air (excluding moisture and oil) and provide air in the pressure range indicated in the official specification table; air pipes use clean pipe with specified outer diameter
Q: Can selective advice and technical information be provided?
A: Yes. We can provide selection advice based on your use environment (distance, wind speed, temperature, blast protection requirements, etc.) and official product catalogues, drawings (DXF) and technical information (PDF)
Q: What parameters are the main parameters for the selection of electrical decomposition devices?
A: General emphasis is given to identifying: the distance and speed requirements, the need for extra gas connections, the size and beat of the electrically removed, the use of the environment (temperature/cleanness/explosiveness) and the specifications of the supporting power source or control. We welcome, when not certain, the fact that we are on the ground and that we are the ones who are the ones who are the ones to help us. —
Q: How do you deal with quality assurance and after sale?!?
A: This item is accompanied by an official instructions of use. The quality of non-anthropogenic damage is dealt with in the factory terms, depending on the order confirmation; the consumables (discharge needles, filters, etc.) are normal wear and tear, and can be ordered for replacement.? — A: This item is attached to the official instructions of use.. Quality of non-anthropogenic damage is addressed by the manufacturer, depending on the order
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.