SSD DZ5 Electrostatic Potential Meter (Model DZ5) is a ESD Test Equipment supplied by Guangzhou Yunke Electronics Co., Ltd. SSD STATIRON DZ5 electrostatic potential meter: 0.00 to ±19.99 kV at 0.01 kV, 30 mm LED-focused distance, 180 degree rotating sensor head.
Brand: SSD | Category: ESD Test Equipment
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DZ5 |
|---|---|
| Product Model | DZ5 |
| Signal Detection Method | Vibration Type Wave Method *1 |
| Display Data Update Rate | 0.4 s |
| Measuring Electric Digit Range | 0.00~±19.99kV(Resolution 0.01kV) |
| Accuracy | ±10% ±2digit |
| Measuring Distance | 30mm(Measured and Detection Part ) |
| Measuring Distance Adjustment | LED Light Focus Type (Light i.e. Distance 30mm) |
| Probe Rotatable Angle | 180 degrees (each 45 degrees Positioning ) |
| Display Part | built-in Backlight LED Display |
| Extreme Display | + Extreme Property /- Extreme Property Display |
| Mode Switching | Use MODE Key Switching |
| Battery Check | Display Part Display Quantity |
| Power Supply | 3 Battery 2 This |
| Operating Environment | Range Temperature: 5~40℃ Range Humidity: 20~70%RH(not Condensation) |
| Body Dimensions | 68×23×148mm(W×D×H) |
| Weight | 200g(incl. battery) |
| Supplied Accessories | Grounding Wire, Operating Instructions |
| Optional Accessories | Body with Electric Extreme Plate (ODZ5-HPLT) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The SSD DZ5 (STATIRON series) is a handheld electrostatic potential meter from SHISHIDO ELECTROSTATIC, LTD. (SSD), a Japanese electrostatic-control manufacturer founded in 1938 whose HDC-AC high-frequency ionisation technology underpins a complete range of ionisers, cleaners, measuring instruments and anti-static products. Instruments in the MEASURES family detect the electrostatic field or measure resistance and present electrostatic potential and surface resistance as direct digital readings, supporting quantitative control and verification of ESD countermeasures on site.
The DZ5 uses a vibrating chopper sensing method and measures 0.00 to ±19.99 kV at 0.01 kV resolution with an accuracy of ±10% ±2 digit. The measuring distance is 30 mm between the object and the sensor head, set by a red LED focus marker: when the light spot is in focus, the distance is correct, which makes positioning quick and repeatable in the field. The display updates every 0.4 s, the head rotates through 180° with detents every 45°, and the backlit LED display shows polarity (+ / -) and remaining battery charge. Modes are changed with the MODE key.
Zero the instrument and check the battery before measurement. For surface-resistance measurements, note the influence of ambient temperature and humidity on readings and use the supplied standard electrodes and leads. Remove the batteries during long storage, protect the sensor head from impact and arrange periodic calibration according to use. Digital direct reading makes the instrument suitable for patrol checks, verification and process control in ESD-sensitive manufacturing and inspection operations.
Is this an original Japanese product? Yes. The instrument is an original SHISHIDO ELECTROSTATIC (SSD) product, sold and supported by Yunke Electronics.
Why is no price shown? This page does not list prices. Please send us the model and quantity for a quotation and lead time.
Does it need periodic calibration? Regular calibration according to use is recommended to keep readings reliable; ambient temperature and humidity also affect surface-resistance measurement. We can arrange calibration.
Can you help with selection and documentation? Yes. Tell us the working distance, air speed, temperature and any explosion-protection requirements, and we can advise on selection and supply the official catalogue, DXF drawings and technical PDFs.
What matters when selecting an ioniser? Installation distance and required decay time, whether an external air supply is needed, the size and cycle time of the target, the environment (temperature, cleanliness, explosion protection) and the power supply or controller specification. Non-warranty quality issues are handled under the manufacturer's terms; consumables such as discharge needles and filters can be ordered separately.
All figures above are transcribed as published in the official SSD DZ5 specification, without conversion or inferred values. This is a quotation-only catalogue; no prices are listed.
For the official catalogue, drawings (DXF), technical PDFs, a quotation or lead time, please contact our engineers.