Sylvac 810-1532 Precision Measuring Tools (Model 810-1532) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Sylvac 810-1532 Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Sylvac | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 810-1532 |
|---|---|
| Brand | Switzerland Sylvac(SwitzerlandSylvac) |
| Series | Caliper S_Cal EVO Basic |
| Product Type | Digital Caliper (IP67 Protection · No Data Output) |
| Origin | Switzerland |
| Alias / Alternative Name | S_Cal EVO Type Digital Caliper, Caliper S_Cal EVO Basic |
| EAN Barcode | 7640125682366 |
| Measuring Range (mm) | 300 |
| Maximum Error G – External Measuring EMPE (µm) | 30 ¹ |
| Maximum Error – Internal Measuring SMPE (µm) | 40 ² |
| Dimension A (mm) | 388 |
| Dimension B (mm) | 64 |
| Dimension C (mm) | 14 |
| Dimension D (mm) | 19 |
| Dimensions E (Mm) | 16 x 4 |
| Depth Rod (Mm) | Official not Output |
| IP Rating (IEC 60529) | IP67 |
| Functions | Position Zero, Preset (Maximum 999.99), mm / inch Switching, Hold |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Specifications: IP67 m/s Sylvac 3.5 mm 2.5 EVO. Please contact our engineers for the full technical wording. Reference values: 67.
General direct measurements of the outer diameter, inner diameter, depth, step size of the workshop, metering room and production line are appropriate in cases where IP67 protection is required but data output is not required
The following parameters are taken item by item from the technical parameter list of the official product pages of Sylvac (Tanqing, Switzerland), which is not converted in units and does not add extras to the assumptions; the items not listed in the official table are also not filled in this page
1) This page is a single-type page with the value in the table, i.e. the order number in the official technical form (810-1532) the original value of the column; if the same model appears in an official multiple tab, the single most complete parameter for this page..Signs
12,34,5, which appears after the values in the 2) table, is the original footnote mark of the official Sylvac table, which covers the applicable conditions of measurement, temperature, heading configuration, etc., and this page retains the original mark, Specific conditions are based on official technical information.!
The "" in the 3 table is the label for the official technical table; if the official technical form is a dash, this page is marked as "officially unsaid" and does not infer its meaning (e.g. without the measurement, No such size or non-applicability)
The official size column (Scope A/B/C etc.) of 4 corresponds to the shape size map in the official technical information, and this page reproduces only the values and does not extrapolate uncodified dimensions
S_Cal EVO is an absolute electronic card-foot platform of Sylvac, which covers basic, bluetooth, close output, micro-meal readings and grooves/deep holes, etc. The main differences between reading resolution, data output and special claw-checking are the use of the S.I.S absolute sensor system and the IP67 rack
Official standard delivery content: Instatementsite to aqui05; — Lithyan van CR2032po; Inaction.12. — ; Inaction.12.sss
Please indicate "Sylvac (Tanqing, Switzerland)+ order number" when ordering, for orderssssStands810-1532The price is not displayed on this page. The price and the date are requested to contact Guangzhou Yunke Electronics Co., Ltd. Question
Q: platinum and the perpendicular version?
A: platitudes of official "connection" are nooth, local readable only; Smart versions have built-in +mouth, wireless transmissions, which can be used to upload measurements wirelessly._ The hangars, protection levels, accuracy and display specifications are consistent.!
Q: How many depth poles?
A: The official provision of two configurations of rectangular depth poles (40) and cylinder depth poles ( 1.5 mm), which are distinguished by the order number. Reference: 1.4 mm. Reference values: 4.
Q: Is this the original Swiss original?
A: Yes. This is a Swiss product from the Sylvac (Tanqing, Switzerland) plant, with Guangzhou Yunke Electronics Co., Ltd. for marketing and technical support
Q: Is this page parameter fully consistent with official information?
A: Consistent. Parameters are reproduced item by item in the table of technical parameters for the official product pages of Sylvac, in the official original language of both units and expressions; the unpublished project page is not filled in and is not speculative
Q: Can selective advice and technical information be provided?
A: Yes. We can provide selective advice based on measured size, accuracy requirements, use of environment (oil/cooling fluid/whether wireless communication is allowed) and data recording requirements, and can provide official technical information.?
Q: How do you deal with quality assurance and after sale?!?
A: Quality issues for non-anthropogenic damage are dealt with in accordance with the terms of the manufacturer, depending on the confirmation of the order; if cyclical calibration is required, we can assist in the arrangement
This page is marked by the official published value of Sylvac (Tanqing, Switzerland), which is published for selection; call or correspondence is requested for spot, delivery and price._. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.