Sylvac 810-1602 Precision Measuring Tools (Model 810-1602) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Sylvac 810-1602 Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Sylvac | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 810-1602 |
|---|---|
| Brand | Switzerland Sylvac(SwitzerlandSylvac) |
| Series | Caliper S_Cal EVO Smart External Groove |
| Product Type | Digital Caliper (external Groove / external Base Dedicated Measure · Bluetooth®) |
| Origin | Switzerland |
| Alias / Alternative Name | S_Cal EVO external Groove Type Digital Caliper, Caliper S_Cal EVO Smart External Groove |
| EAN Barcode | 7640125687972 |
| Measuring Range (mm) | 150 |
| Maximum Error G – External Measuring EMPE (µm) | ±20 ² |
| Maximum Error – Internal Measuring SMPE (µm) | ±30 ³ |
| Depth Rod (Mm) | 4 x 1.4 |
| IP Rating (IEC 60529) | IP67 |
| Connection (Instrument to Device) | built-in Bluetooth® Wireless ¹ |
| Functions | Position Zero, Preset (Maximum 999.99), mm / inch Switching, Hold |
| Smart Inductive Sensor | ● |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
S_Cal EVO Official instructions are used to measure the troughs and the outer (silent) and to house `human-power' wireless transmission. Reference: Sylvac
The dimensions of conventional car-footings such as the width of the axle ditches, the recoils, the seals, the outer steps, etc. are difficult to locate
The following parameters are taken item by item from the technical parameter list of the official product pages of Sylvac (Tanqing, Switzerland), which is not converted in units and does not add extras to the assumptions; the items not listed in the official table are also not filled in this page
1) This page is a single-type page with the value in the table, i.e. the order number in the official technical form (810-1602) the original value of the column; if the same model appears in an official multiple tab, the single most complete parameter for this page..Signs
12,34,5, which appears after the values in the 2) table, is the original footnote mark of the official Sylvac table, which covers the applicable conditions of measurement, temperature, heading configuration, etc., and this page retains the original mark, Specific conditions are based on official technical information.!
The "" in the 3 table is the label for the official technical table; if the official technical form is a dash, this page is marked as "officially unsaid" and does not infer its meaning (e.g. without the measurement, No such size or non-applicability)
The official size column (Scope A/B/C etc.) of 4 corresponds to the shape size map in the official technical information, and this page reproduces only the values and does not extrapolate uncodified dimensions
The claws of the pits are shaped by the characteristics of the measured cavity, and when selected, provide the width, depth and proximity of the grooves to confirm their penetration.Screts and.Screts
Official standard delivery content: Instatementsite to aqui05; — Lithyan van CR2032po; Inaction.12. — ; Inaction.12.sss
Please indicate "Sylvac (Tanqing, Switzerland)+ order number" when ordering, for orderssssStands810-1602The price is not displayed on this page. The price and the date are requested to contact Guangzhou Yunke Electronics Co., Ltd. Question
Q: Can you check the gutters?
A: No. This model is the Outer Trench; for the Intra-Crowd, please choose S_Cal EVO-FarGrail,_Cal -O-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C-C- The dot-touching type can be seen at the tampon Žis
Q: Is this the original Swiss original?
A: Yes. This is a Swiss product from the Sylvac (Tanqing, Switzerland) plant, with Guangzhou Yunke Electronics Co., Ltd. for marketing and technical support
Q: Is this page parameter fully consistent with official information?
A: Consistent. Parameters are reproduced item by item in the table of technical parameters for the official product pages of Sylvac, in the official original language of both units and expressions; the unpublished project page is not filled in and is not speculative
Q: Can selective advice and technical information be provided?
A: Yes. We can provide selective advice based on measured size, accuracy requirements, use of environment (oil/cooling fluid/whether wireless communication is allowed) and data recording requirements, and can provide official technical information.?
Q: How do you deal with quality assurance and after sale?!?
A: Quality issues for non-anthropogenic damage are dealt with in accordance with the terms of the manufacturer, depending on the confirmation of the order; if cyclical calibration is required, we can assist in the arrangement
This page is marked by the official published value of Sylvac (Tanqing, Switzerland), which is published for selection; call or correspondence is requested for spot, delivery and price._. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.