Sylvac 810-1600 Precision Measuring Tools (Model 810-1600) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Sylvac 810-1600 Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Sylvac | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 810-1600 |
|---|---|
| Brand | Switzerland Sylvac(SwitzerlandSylvac) |
| Series | Caliper S_Cal EVO Smart Internal Groove |
| Product Type | Digital Caliper (internal Groove / internal Base Dedicated Measure · Bluetooth®) |
| Origin | Switzerland |
| Alias / Alternative Name | S_Cal EVO internal Groove Type Digital Caliper, Caliper S_Cal EVO Smart Internal Groove |
| EAN Barcode | 7640125687835 |
| Measuring Range (mm) | 150 |
| Maximum Error G – External Measuring EMPE (µm) | ±20 ² |
| Maximum Error – Internal Measuring SMPE (µm) | ± 30 ³ |
| Depth Rod (Mm) | 4 x 1.4 |
| IP Rating (IEC 60529) | IP67 |
| Connection (Instrument to Device) | built-in Bluetooth® Wireless ¹ |
| Functions | Position Zero, Preset (Maximum 999.99), mm / inch Switching, Hold |
| Smart Inductive Sensor | ● |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
S_Cal EVOsãove is a ditch and a karaoke for Sylvac (Tanqing, Switzerland).! Official instructions are used to measure the pits and interiors ( keying) and to house `human-power' wireless transmissions
The dimensions of the inner cavity characteristics of the perine card springs, seals, inner perforated steps, interior width, etc
The following parameters are taken item by item from the technical parameter list of the official product pages of Sylvac (Tanqing, Switzerland), which is not converted in units and does not add extras to the assumptions; the items not listed in the official table are also not filled in this page
1) This page is a single-type page with the value in the table, i.e. the order number in the official technical form (810-1600) the original value of the column; if the same model appears in an official multiple tab, the single most complete parameter for this page..Signs
12,34,5, which appears after the values in the 2) table, is the original footnote mark of the official Sylvac table, which covers the applicable conditions of measurement, temperature, heading configuration, etc., and this page retains the original mark, Specific conditions are based on official technical information.!
The "" in the 3 table is the label for the official technical table; if the official technical form is a dash, this page is marked as "officially unsaid" and does not infer its meaning (e.g. without the measurement, No such size or non-applicability)
The official size column (Scope A/B/C etc.) of 4 corresponds to the shape size map in the official technical information, and this page reproduces only the values and does not extrapolate uncodified dimensions
The claws of the pits are usually in the form of hooks or dots, and are measured by positioning the slot walls and readings closer to functional dimensions
Official standard delivery content: Instatementsite to aqui05; — Lithyan van CR2032po; Inaction.12. — ; Inaction.12.sss
Please indicate "Sylvac (Tanqing, Switzerland)+ order number" when ordering, for orderssssStands810-1600The price is not displayed on this page. The price and the date are requested to contact Guangzhou Yunke Electronics Co., Ltd. Question
Q: How deep can the gutters be measured?
A: No official uniform depth values are published depending on the proximity of the claw gauge to the hole; provide aperture and sink depth, and we help to identify detectable ranges.!
Q: Is this the original Swiss original?
A: Yes. This is a Swiss product from the Sylvac (Tanqing, Switzerland) plant, with Guangzhou Yunke Electronics Co., Ltd. for marketing and technical support
Q: Is this page parameter fully consistent with official information?
A: Consistent. Parameters are reproduced item by item in the table of technical parameters for the official product pages of Sylvac, in the official original language of both units and expressions; the unpublished project page is not filled in and is not speculative
Q: Can selective advice and technical information be provided?
A: Yes. We can provide selective advice based on measured size, accuracy requirements, use of environment (oil/cooling fluid/whether wireless communication is allowed) and data recording requirements, and can provide official technical information.?
Q: How do you deal with quality assurance and after sale?!?
A: Quality issues for non-anthropogenic damage are dealt with in accordance with the terms of the manufacturer, depending on the confirmation of the order; if cyclical calibration is required, we can assist in the arrangement
This page is marked by the official published value of Sylvac (Tanqing, Switzerland), which is published for selection; call or correspondence is requested for spot, delivery and price._. Reference: Guangzhou Yunke Electronics Co., Ltd
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.