Home › Products

Product Overview

DL11 Precision Levels (Model DL11) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. DL11 Precision Levels — Precision Levels · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Precision Levels

Sales Inquiries: 15626018696 · 78403603@qq.com

DL11 Precision Levels

Technical Specifications

ModelDL11
SeriesQianshao DL Series Number digits Type Electric Precision Levels( Runtime Brand)
CategoryNumber digits Type Electric Precision Levels(Small Angle, Height Accuracy Meter Quantity Type)
Brand andQianshao Precision Instrument with Limit ( in Runtime , Runtime Brand)
Official DocumentationDL-WL Series Electric Precision Levels Operation Operating Instructions(Qianshao Precision Instrument with Limit )
ResolutionII levels 0.001mm / m; I levels 0.01mm / m
Applicable ClassSuitable “00” class Product Flatness, Direct Wire degrees Detection
Display Range0~±1999(Number digits)
Measuring Range≤±500(Number digits)
Maximum Permissible Error≤±(1+A×2%), A is Check points Nominal Value to Value
Measuring PrincipleHeight Sensitivity Capacitance Type Sensor + Single Plate Unit Control
Measuring Unitmm / m and Angle (s) two Type optional
Data outputStandard RS232 Interface, can Direct and Meter Calculation Unit Communication
Power Supply4 cells 1.5V AA(5 No.) Battery
Power Consumptionless than 100mW
Base Operating Surface Dimensions150×47×20 mm
Dimensions150×47×170 mm
Net WeightApprox. 1.3 kg
Packaging Dimensions / Gross Weight290×235×105 mm / Approx. 3.0 kg
Data Storageup to 999 groups (DL Series)
Each Range Zero Digit Repeatability≤1 pcs Number
Specification≤6 pcs Number / 4h, 3 pcs Number / h(II levels)
Repeatability≤1 pcs Number
Display Reading Stabilization Time≤10 s
Zero Value Error≤1 pcs Number
Verification Conditions(20±2)℃、0.5℃/h
Standard ConfigurationElectric Precision Levels 1 units, external Connection Control Box 1 pcs, Product Light Disk 1 Plate (internal incl. DL / WL Series Operating , Basic Measurement Software Operating , Basic Measurement Software Installation Range ), Gauge Screwdriver 1 pcs, 5# Battery 4 pcs, Instrument Case 1
Optional AccessoriesCommunication Cable 1 records

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Technical Specifications

The following table shows the specifications of DL11, which were taken from the use instructions for the operation of the electronic horizontal instrument in the DL-WL series (Qingdao Front Station Fine Instrument Ltd.), which were not converted or rewritten

Features

  1. Discognize II-Standed 0.001mm/m; I-Step 0.01mm/m-Step the appropriate strategic position based on the accuracy of the testSp
  2. High sensitivity electro-voltage sensors combined with single-simple control to measure accuracy, read-intuitive, responsive
  3. Touch-to-sense panels, simple to operate; key zero at any location (absolute zero and relative zero)
  4. Measurable data can be stored, read, deleted, DL series stored up to 999 group without live hand-cuffing
  5. Standard RS232 interface output, which can be communicated directly to computers and associated with basic measurement software for automatic or manual measurement and data
  6. Measuring units can be converted between mm/m and angle (sec) to accommodate different measurement habitsAVsSS
  7. Automated temperature measurement function is available to view ambient temperatures and to determine whether the check conditions are met
  8. Automatic monitoring of power voltage and low voltage alarm function to avoid measuring power outages
  9. General-purpose 4 section 1.5V AA battery powered with power less than 100mW, ready for on-site replacement X battery powered with power less than 100W and ready to replace
  10. Saved and restored out of plant settings, misoperated quickly back to initial status

Key Advantages

  1. High-precision detection needs for 00 level flats and guidance.ScreaksScretsSc. Reference: 0.001mm/m
  2. Single-sized digital circuits, high resistance, stable readings
  3. RS232 straight-on computer, which can automatically collect, calculate and output print results and graphics with measurement softwareAccess to the use of the softwareC
  4. Maximum storage of DL series, with long-conductor track multiple point detection without intermediate export. Reference: 999
  5. Touch-to-sense panel + zero location, low on-site operating threshold
  6. Automatic temperature measurement + low voltage alarm, state of use
  7. 150×47, approximately 1.3kg, deactivated handles to be fixed across bridges. Reference: 170mm
  8. Recoverable from plant settings, simple maintenance after long use

Applied industry & test project

Selection Guide

  1. Sort by Precision of the measure"00" level flatbed, precision machine bed guidance track preferred DL11 (II-Stage 0.001mm/m); "0" XDL10 (II-Stage 0.005mm/m); "1",sStamp Q, Queue 2 for DL9 (I-argument 0.01mm/m)
  2. It's rough and fineThe site proposes to quickly adjust the measured basic level by using the I (0.01mm/m) and then to the II strategizing to avoid repeated zeroing in excess of process
  3. Watch the bridgeWhen reading in radians, the readings of the points are converted to a line value of 1000 and i (μm) in the lower range, which is for μm, L for bridging distance (mm) and different results. Cross-bridge specifications are required before testing.!
  4. Direction of measurementThe handle points should be consistent with the direction of cross-bridge movement, the instrument is locational and the reloading affects readings.!
  5. The temperature balance can't be saved4 hours or more must be placed in the working environment before use, and shall be measured after the minutes of the transmission of 20 ~ 30; the high accuracy II is particularly sensitive to temperature and vibration. : II Q Q —

FAQ

Q: What's the difference between DL11, DL10, DL9? What should I do?

A: Three hosts with the same structure, software and interface, different in the degree of resolution and application accuracy: II slotting 0.001mm/m,. Level and linearness tests appropriate for "00" level products; II slotting resolution 0.005mm/m for "0" level; The I slotting of DL9 is 0.01mm/m for the levels "1" and "2" for the selection of the accuracy of the measured object. Reference: DL11, DL10

Q: Why do DL11-1, DL10-1 do not have separate technical indicators in the instructions?

A: The official instructions 'Current Product Profiles' list DL11, DL11-1, DL10, DL10-1, DL9 under " Electronic Level Machines (single machines)" Standard configurations are identical; however, the text “Main technical indicators” section does not list -1 variants by type, so this page only lists the official I slotting resolution 0.01mm/m, Please confirm with the manufacturer that we do not make assumptions.!

Q: How do measurements get to computers?

A: The home belt standard RS232 interface, which is connected to the computer by means of a communication cable (selection). to the official basic measurement software (DL-PC) can be measured automatically or manually._ and print the calculation and graphics; if geometric measurement is required, the geometric measurement software module can be added to DL-PC.Screen.Screens.ScreaksScres.Scres.s.Scopes.ScrewScrets.Scres.Scres

Q: How much data can this instrument hold?

A: The DL series of body sizes can store the most of the 999 group measurements, read in turn and deleted. The WL series is a 500 group. X-Z-X-Q series.SSZX-Z-Z-Z-X-X-X-X-Q No intermediate export is required for multiple points of long-conductor tracks

Q: What is the concept of distinction 0.001mm/m? Q: What

A: mm/m indicates a difference in height in the length of 1. 0.001mm/m corresponds to the difference in height in the length of 1 m. This is about 0.2 corner seconds, which is a small angle measurement level. The number units can be changed directly between mm/m and angle (s)..Scope_screech_.Screech_Technology_Technology_Technology_Technology_Technology_Technology_Technology_Technology_Technology_Techn. Reference: 1

Q: What about display values that keep beating or blinking?

A: If the number exceeds 1999, the number will scintilt continuously, indicating that it is beyond the range of measurements and can be returned to normal by relative zeros. In addition, the ambient temperature is volatile, the foundations vibrating, and the ground is vibrating. Jumps may also occur when the electricity is not available for 20 minutes or when the temperature balance of 4 hours is not done

Q: Should we mark it on our own?

A: No need or recommendation. The electronic horizontal instrument is marked by the measurement department on a small-scale inspection device, and users are not allowed to mark at will to affect the accuracy of measurements. Once the plant is restored, it is restricted by the sensor's own properties._ It is also necessary to re-mark the small-angled checker

Q: How do you confirm the offer and the period of submission?!

A: No price is displayed on this page. Please contact the sales officer of Guangzhou Yunke Electronics Co., Ltd. to confirm the price, spot and delivery of the specific model, and we can use the scene to help select the resolution slot and the fittings

Q: Are calibration certificates provided with the goods? Q: Q

Standard configurations usually do not include third-party verification or calibration certificates. The electronic level instrument is marked by a measurement department on a small-range inspection. if the Institute of Metrology has a retroactive certificate or a report of the site calibration, please state at the next check that we can arrange for it.AAAAAA

Q: What are the concerns before use?!

A: Temperature balance (no power) must be maintained in the working environment for more than 4 before the electron horizontal machine is used; normal testing cannot be performed until 20 — 30 minutes; ; [Scope of the electronic horizontal machine;] of the electronic machine shall be used for normal testing only after the normal time of the operation of the electronic system; of the electronic system shall be used for the operation The base of the measured project site should be strong and non-vibrational; the appropriate working environment is 20 2 °C, the humidity is not greater than 75 per cent and the temperature change is not greater than 1 X °C per hour. Jumps may occur when environmental conditions are not met.!

Q: Is the product picture the official original?

A: Yes. This page is taken from the electronic levelr back-up photo from the official product of Qingdao Prefectural Equipment Ltd., which is standardized for white bottom processing and watermarks for Guangzhou Yunke Electronics Co., Ltd., without replacing the crowned Li. : A: Yes.: This page is taken from the electronic level photo from the official product information of Qingdao Precision Instrument Ltd.SS

Pictures and Parameter Sources of this Page Products

Source: Instructions for the operation of the DL-WL series of electronic horizontal instrument (Singjima Point Fine Instrument, Ltd.). The pictures are full-time photos of the official product of the Qingjia outpost, which have been standardized for white bottom processing and watermarking in accordance with station norms. QueerScreenss Qinjiangs.ssss of the Qingji Island Post official product data.s If not in conformity with the latest specifications of the plant, the manufacturer's confirmation is the basis

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

DL9-PC Precision Levels
Precision Levels

DL9-PC Precision Levels

DL9-PC
└ Qianshao Levels
DL10-PC Precision Levels
Precision Levels

DL10-PC Precision Levels

DL10-PC
└ Qianshao Levels
DL11-PC Precision Levels
Precision Levels

DL11-PC Precision Levels

DL11-PC
└ Qianshao Levels
DL9-XPC Precision Levels
Precision Levels

DL9-XPC Precision Levels

DL9-XPC
└ Qianshao Levels
DL10-XPC Precision Levels
Precision Levels

DL10-XPC Precision Levels

DL10-XPC
└ Qianshao Levels
DL11-XPC Precision Levels
Precision Levels

DL11-XPC Precision Levels

DL11-XPC
└ Qianshao Levels