DL10-1 Precision Levels (Model DL10-1) is a Precision Levels supplied by Guangzhou Yunke Electronics Co., Ltd. DL10-1 Precision Levels — Precision Levels · Yunke Electronics. Request a quotation and datasheet.
Brand: See datasheet | Category: Precision Levels
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DL10-1 |
|---|---|
| Series | Qianshao DL Series Number digits Type Electric Precision Levels( Runtime Brand) |
| Category | Number digits Type Electric Precision Levels(Small Angle, Height Accuracy Meter Quantity Type) |
| Brand and | Qianshao Precision Instrument with Limit ( in Runtime , Runtime Brand) |
| Official Documentation | DL-WL Series Electric Precision Levels Operation Operating Instructions(Qianshao Precision Instrument with Limit ) |
| Resolution | I levels 0.01mm / m |
| Model Description | Official 《 each Class Product Configuration Single 》 will DL11, DL11-1, DL10, DL10-1, DL9 and Series at “ Electric Precision Levels(Single Unit)” under, This Model is its in Configuration Body; Official Description Correction Text not Single Series Indication its levels digits Parameter, Tool Body levels digits Configuration and Accuracy |
| Display Range | 0~±1999(Number digits) |
| Measuring Range | ≤±500(Number digits) |
| Maximum Permissible Error | ≤±(1+A×2%), A is Check points Nominal Value to Value |
| Measuring Principle | Height Sensitivity Capacitance Type Sensor + Single Plate Unit Control |
| Measuring Unit | mm / m and Angle (s) two Type optional |
| Data output | Standard RS232 Interface, can Direct and Meter Calculation Unit Communication |
| Power Supply | 4 cells 1.5V AA(5 No.) Battery |
| Power Consumption | less than 100mW |
| Base Operating Surface Dimensions | 150×47×20 mm |
| Dimensions | 150×47×170 mm |
| Net Weight | Approx. 1.3 kg |
| Packaging Dimensions / Gross Weight | 290×235×105 mm / Approx. 3.0 kg |
| Data Storage | up to 999 groups (DL Series) |
| Standard Configuration | Electric Precision Levels 1 units, external Connection Control Box 1 pcs, Product Light Disk 1 Plate (internal incl. DL / WL Series Operating , Basic Measurement Software Operating , Basic Measurement Software Installation Range ), Gauge Screwdriver 1 pcs, 5# Battery 4 pcs, Instrument Case 1 |
| Optional Accessories | Communication Cable 1 records |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The following table shows the specifications of DL10-1, the data being taken from the use instructions for the operation of the electronic horizontal instrument in the DL-WL series (Qingdao Front Station Fine Instrument Ltd.), which were not converted or rewritten. Ques Ques s s s s s s s s s s s s s s s s s
Q: What's the difference between DL11, DL10, DL9? What should I do?
A: Three hosts with the same structure, software and interface, different in the degree of resolution and application accuracy: II slotting 0.001mm/m,. Level and linearness tests appropriate for "00" level products; II slotting resolution 0.005mm/m for "0" level; The I slotting of DL9 is 0.01mm/m for the levels "1" and "2" for the selection of the accuracy of the measured object. Reference: DL11, DL10
Q: Why do DL11-1, DL10-1 do not have separate technical indicators in the instructions?
A: The official instructions 'Current Product Profiles' list DL11, DL11-1, DL10, DL10-1, DL9 under " Electronic Level Machines (single machines)" Standard configurations are identical; however, the text “Main technical indicators” section does not list -1 variants by type, so this page only lists the official I slotting resolution 0.01mm/m, Please confirm with the manufacturer that we do not make assumptions.!
Q: How do measurements get to computers?
A: The home belt standard RS232 interface, which is connected to the computer by means of a communication cable (selection). to the official basic measurement software (DL-PC) can be measured automatically or manually._ and print the calculation and graphics; if geometric measurement is required, the geometric measurement software module can be added to DL-PC.Screen.Screens.ScreaksScres.Scres.s.Scopes.ScrewScrets.Scres.Scres
Q: How much data can this instrument hold?
A: The DL series of body sizes can store the most of the 999 group measurements, read in turn and deleted. The WL series is a 500 group. X-Z-X-Q series.SSZX-Z-Z-Z-X-X-X-X-Q No intermediate export is required for multiple points of long-conductor tracks
Q: What is the concept of distinction 0.001mm/m? Q: What
A: mm/m indicates a difference in height in the length of 1. 0.001mm/m corresponds to the difference in height in the length of 1 m. This is about 0.2 corner seconds, which is a small angle measurement level. The number units can be changed directly between mm/m and angle (s)..Scope_screech_.Screech_Technology_Technology_Technology_Technology_Technology_Technology_Technology_Technology_Technology_Techn. Reference: 1
Q: What about display values that keep beating or blinking?
A: If the number exceeds 1999, the number will scintilt continuously, indicating that it is beyond the range of measurements and can be returned to normal by relative zeros. In addition, the ambient temperature is volatile, the foundations vibrating, and the ground is vibrating. Jumps may also occur when the electricity is not available for 20 minutes or when the temperature balance of 4 hours is not done
Q: Should we mark it on our own?
A: No need or recommendation. The electronic horizontal instrument is marked by the measurement department on a small-scale inspection device, and users are not allowed to mark at will to affect the accuracy of measurements. Once the plant is restored, it is restricted by the sensor's own properties._ It is also necessary to re-mark the small-angled checker
Q: How do you confirm the offer and the period of submission?!
A: No price is displayed on this page. Please contact the sales officer of Guangzhou Yunke Electronics Co., Ltd. to confirm the price, spot and delivery of the specific model, and we can use the scene to help select the resolution slot and the fittings
Q: Are calibration certificates provided with the goods? Q: Q
Standard configurations usually do not include third-party verification or calibration certificates. The electronic level instrument is marked by a measurement department on a small-range inspection. if the Institute of Metrology has a retroactive certificate or a report of the site calibration, please state at the next check that we can arrange for it.AAAAAA
Q: What are the concerns before use?!
A: Temperature balance (no power) must be maintained in the working environment for more than 4 before the electron horizontal machine is used; normal testing cannot be performed until 20 — 30 minutes; ; [Scope of the electronic horizontal machine;] of the electronic machine shall be used for normal testing only after the normal time of the operation of the electronic system; of the electronic system shall be used for the operation The base of the measured project site should be strong and non-vibrational; the appropriate working environment is 20 2 °C, the humidity is not greater than 75 per cent and the temperature change is not greater than 1 X °C per hour. Jumps may occur when environmental conditions are not met.!
Q: Is the product picture the official original?
A: Yes. This page is taken from the electronic levelr back-up photo from the official product of Qingdao Prefectural Equipment Ltd., which is standardized for white bottom processing and watermarks for Guangzhou Yunke Electronics Co., Ltd., without replacing the crowned Li. : A: Yes.: This page is taken from the electronic level photo from the official product information of Qingdao Precision Instrument Ltd.SS
Source: Instructions for the operation of the DL-WL series of electronic horizontal instrument (Singjima Point Fine Instrument, Ltd.). The pictures are full-time photos of the official product of the Qingjia outpost, which have been standardized for white bottom processing and watermarking in accordance with station norms. QueerScreenss Qinjiangs.ssss of the Qingji Island Post official product data.s If not in conformity with the latest specifications of the plant, the manufacturer's confirmation is the basis
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.