Home › Products

Product Overview

Mitutoyo 468-985 Measuring Tools (Model 468-985) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 468-985 Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Mitutoyo | Category: Mitutoyo Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Mitutoyo 468-985 Measuring Tools

Technical Specifications

Brand / OriginMitutoyo Mitutoyo(JapanMitutoyoMitutoyo / Mitutoyo Corporation,Japan)
SeriesMitutoyo 468 Series Digimatic Holtest three points Type Inside Micrometers
Order No.468-985
Main Unit ModelHTD-100RFST
Set Installed TypeStandard sets Installed (per pcs Main Scale with Reading Body)
Measuring Range75 - 100 mm
Resolution0.001 mm
Reading MethodDigital, digits Height 7.5 mm
Measuring Surfacethree Measure , Coating Processing
Automaticthree points Type 120° Measure , Automatic Setting Reading Internal Diameter Value
IP RatingIP65(can at Environment Operating)
Measure Length Welding SystemsABS( to Measurement)/ INC(Phase to Measurement) Dual Welding Systems
Preset ValueStorable 2 groups
Data outputwith Measurement Data Output Terminal
Other functionsFunctions Setting, Low Voltage Alarm, HOLD, Approx. 20 minutes No Operation Auto Power-off
Power SupplySR44 Battery × 1, Normal Gauge Operating under Service Life Approx. 1.2 years
Matching Setting Ring Gaugeø87(1 pcs)
Matching Extension Rod150 mm(1 pcs)
Deep Hole / Blind Holeoptional with Extension Rod Measure Depth Hole; Measure can Blind Hole Bottom Surface Measurement
WarrantySubject to terms of sale

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Mitutoyo Mitutoyo 468-985 3-point aperture thousands-by-foot set (measured range 75 - 100 mm)

This article is a Mitutoyo package, cargo numberS-H-H-H-H-H-. Reference: 468468-985Host typeScrewScHTD-100RFSTmeasure rangeScreen75 - 100 mmThe set isStandard set (self-readable body per main ruler)Each master read separately, multiple jobs can operate in parallel, without sharing the mainframe or changing head

Technical Specifications

The following parameters are derived from the official catalogue of Mitutoyo Mitutoyo, which was not converted or rewritten; the maximum permissible error (MPE) data for this series are not officially provided and therefore not included in the table

Set Contents

This package is configured according to the following lists and is independently packaged for standard plant fittings

Measurements of this package and application

This standard set covers75 - 100 mmAperture interval with two main feet of 75 - 88 / 87 - 100 mm, which is the largest medium mass of the 468 standard package. XO XO XS. O QS Q Each of the two main feet read separately and fit for medium-sized and large works, such as the inner wall of the hydraulic tank, the medium tank set, etc., which are concentrated in 75 ~ 100 mm in aperture

Random configuration of 87 setting of the X only with 150 mm long-bar 1. Reference: 1

Agaves perimeter perimeter for the Mitutoyo 468 seriesScrewsScreaks

Mitutoyo (Mitutoyo) 468 Series biiq 200hriiitiiqThree-point inner perforated 1,000-foot (three-point aperture 1,000-foot)Three radiant silicons are all clothed by 120°, which can be measured automatically with a cavity in the hole, and the true value of the inner diameter is read directly, and the readings are not dependent on the operator's hand and position; compared to the two-point inner diameter device, It is more insensitive to the installation angle and the results of multiple measurements are more stable and suitable for precision aperture tests of the required radians and cylindricals

For this seriesLCD count readings%%%%character height 7.5 mm, read intuitively avoids the difference in vision and estimation error caused by mechanical typographical readings

Why the three-point formula?

Two-point inner diameter devices need to look for maximum values for collusive collage inside the hole, and the results are easily influenced by the operator's manual approach; the three-point structure is designed to be three-point silicons and contact walls simultaneously, and the contact link is necessarily through the hole centre, so that one time it is set for a determination. Repetitious and efficient, especially for bulk aperture detection and rapid field determination

Series of common features (official) —

Watch out for the selection.!The accuracy of measurements cannot be changed using a survey beyond the mark, and there is no official guarantee that the measurements will be accurate at this time. select the matching package between the measured aperture zones and do not mix the head

Selection (official)

Services and support

Specifications: Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 468. Please contact our engineers for the full technical wording.

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Mitutoyo 468-181 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-181 Measuring Tools

468-181
└ Inside Micrometers
Mitutoyo 468-180 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-180 Measuring Tools

468-180
└ Inside Micrometers
Mitutoyo 468-179 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-179 Measuring Tools

468-179
└ Inside Micrometers
Mitutoyo 468-178 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-178 Measuring Tools

468-178
└ Inside Micrometers
Mitutoyo 468-177 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-177 Measuring Tools

468-177
└ Inside Micrometers
Mitutoyo 468-176 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-176 Measuring Tools

468-176
└ Inside Micrometers