Home › Products

Product Overview

Mitutoyo 468-172 Measuring Tools (Model 468-172) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 468-172 Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Mitutoyo | Category: Mitutoyo Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Mitutoyo 468-172 Measuring Tools

Technical Specifications

Brand / OriginMitutoyo Mitutoyo(JapanMitutoyoMitutoyo / Mitutoyo Corporation,Japan)
SeriesMitutoyo 468 Series Digimatic Holtest three points Type Inside Micrometers(Single Body)
Order No.468-172
Main Unit ModelHTD-88R
Product TypeSingle Body ( with Display Single Element; Setting Ring Gauge and Extension Rod is Optional, not Supplied Included)
Measuring Range75 - 88 mm
Resolution0.001 mm
Maximum Permissible Error JMPE±4 µm(Maximum Difference Value 4 µm)
Measuring Methodthree points Type (three ), Measure 120° , Automatic Setting
Measuring SurfaceCoating Processing, ,
IP RatingIP65(Waterproof, Dustproof, Available at Environment)
Position Detection MethodElectromagnetic Type Rotatable Device
Measure Length Welding SystemsABS( to Measurement)/ INC(Phase to Measurement)
Preset ValueStorable 2 groups (Use at points Setting)
DisplayDigital, digits Height 7.5 mm
Data outputwith Measurement Data Output Terminal
Other functionsPosition Zero, points digits, Data Hold, Functions , Automatic Power Supply Open / , Error Warning
Power SupplyType Battery SR44(No.938882)× 1
Battery LifeGeneral Normal Operating under Approx. 1.2 years
Deep Hole / Blind Holecan Connection Blind Hole Bottom Terminal Measurement; Depth Hole optional with Extension Rod
Extension Rod (Optional)No.952623(150 mm)
WarrantySubject to terms of sale

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Mitutoyo Mitutoyo 468-172 3-point aperture kmb (uniform body. measure range 75 - 88 mm)

468-172 is from the Mitutoyo 468 series ofSingle Model_FuncHost typeScrewScHTD-88Rmeasure rangeScreen75 - 88 mm♪ Distinguishing ♪!0.001 mmmax. allowed error JMPESplitSp±4 µm(Maximum difference 4 µm), self-carrying LCD units, three-point (tri-clap) measurements, automatic cavity. Typical applications: heavy mechanical axle, large pump cavity, Pressure puncture systems, etc., with large apertures for 75 ~ 88 mm

Technical Specifications

The following parameters are taken from the official merchandise catalogue Mitutoyo Mitutoyo 2025-2026 series "468 series" with a high number of `22 hrhr (tri-caw percrypt) HTD-Rs 1 The single-body specification table, The data form is cross-checked by Mitutoyo. The data form is not converted or rewritten.The quality of the body is not officially provided..Screen_TreatsScreen_Scene_Treats_Scene_Treats_Treats_Scres.ScresScretsS

This model description

468-172 Programme 75 ~ 88 mm, also in 4 µm. The perforated curvature of this dimension is flat. 4 µm The three-point approach to the arcium is almost supported by three points, with good reliability of the heart, but the vertical effect of the measure on the reading should be increased accordingly, and the measurements should be made to the extent possible to keep the axial line of the volume in parallel with the perforated axis

Compared to 468-171 (62 ~ 75 mm) and 468-173 (87 ~ 100 mm), X-468 (87 ~ 100 mm) This model is a medium-range for the detection of a product of a given type with aperture stabilization at 75 ~ 88 mm..SpunnersStightsS

Aperture inspection for heavy mechanical archoles, cavity of large pumps, pressure airholes

Random attachments and selections: This model is in a single form, and the factory logos do not contain the setting of the rules and long poles (officially note the item.). The bathymetric measurements are optional with long poles No. 952623 (150 mm)

Difference between monomer and suit%%

The 468 series is divided into two categories: a complete display unit with a single self-portfolio, officially marked "nooutoutoutvesher/ " The setup is a selection between the rules and the long pole; the set-up shares multiple headers (or the main foot) with a display device covering multiple apertures. A single aperture specification is long-term point-pointed to detect singles, and the size of the specification is wide, but the package is more economical

A thousand-foot aperture perimeter for the 468 seriesAs

The Mitutoyo 468 series of pii60urhr is measured using a three-point (tri-clap) formula: three thugs are laid on 120°, and they are automatically set in the hole. Reads directly the inner diameter truth, readings that are not influenced by the operator's technique and gesture, are repetitive and are suitable for precise aperture tests with a required radiometric and cylindrical dimensions

(a) Series co-configuration: titanium coating (flex resistance, shock resistance); IP65 protection, which can be used for cutting liquid spill processing sites; Electromagnetic induction rotation encoder with ABS/INC binary system capable of storing preset values for 2 group; LCD alpha-high 7.5 mm; approaching the bottom end of the blind hole, Deep holes can be fitted with long poles; data output endpoints supported by functional locking and approximately 20 minute non-operational automatic shutdown; 1 x 1 button batteries, The normal life expectancy is approximately 1.2. Reference: SR44

Precision: The official JMPE is the range of error values for the subject's exposure to the entire surface of the measurements, where the " maximum margin" refers to the difference between the maximum and the minimum values in that range

Selection (official)

Services and support

Guangzhou Yunke Electronics Co., Ltd. supplies Mitutoyo Mitutoyo original bulkware, which provides three-point aperture knd of the 468 series with selection, quotations and post-sale support. The original plant will also be provided with the required set-up, long poles and data-output accessories

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Mitutoyo 468-181 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-181 Measuring Tools

468-181
└ Inside Micrometers
Mitutoyo 468-180 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-180 Measuring Tools

468-180
└ Inside Micrometers
Mitutoyo 468-179 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-179 Measuring Tools

468-179
└ Inside Micrometers
Mitutoyo 468-178 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-178 Measuring Tools

468-178
└ Inside Micrometers
Mitutoyo 468-177 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-177 Measuring Tools

468-177
└ Inside Micrometers
Mitutoyo 468-176 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 468-176 Measuring Tools

468-176
└ Inside Micrometers