KANON 120GCK Torque Testers (Model 120GCK) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KANON 120GCK Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: KANON | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | 120GCK |
|---|---|
| Brand | KANON(KANON / NAKAMURA MFG. Co., Ltd.) |
| Category | Adjustable Type Interchangeable Head Torque Wrench () |
| Range (kgf·cm / kgf·m) | 40~120 |
| Range (N·m) | 4~12 |
| Interchangeable Head | 25(QCK,SCK,RCK,HCK) |
| Overall length | 209 mm |
| Head Dimensions (mm) | 10×45×13 |
| Body Dimensions (mm) | 18.2×9.6×29 |
| Weight | 0.21 kg |
| Accuracy | ±3%(Indication Value) |
| Origin | Japan |
| Calibration Basis | ISO 6789-1 / ISO 6789-2 |
| Supply Notes | Guangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
KANON (Cooked by KANON/ NAKAMURA MFG. Co., (xv) 120 GCK is a section of the GCK series, The same structure as LCK, which is used to create a new system for the use of the Internet, is used to create a new system for the use of the Internet._BAR_._BAR_._BAR_._able_toque_to_._to_. tore_to_to_to_to_.? to_to_to_to_to_to_to_to_to_to_to_to_ The difference is in hand handle material (GCK for resin). Reference: GCK
The following table shows the mass and weight of all GCK models in the GCK series, which allows for the selection of the actual hard torque type._. Reference: 7
| Model | Range (kgf·cm / kgf·m) | Weight |
|---|---|---|
| 60GCK | 20~60 | 0.18 kg |
| 120GCK | 40~120 | 0.21 kg |
| 250GCK | 50~250 | 0.37 kg |
| 500GCK | 100~500 | 0.6 kg |
| 1000GCK | 200~1000 | 0.68 kg |
| 1400GCK | 400~1400 | 1.3 kg |
| 2000GCK | 400~2000 | 1.3 kg |
(a) Automobiles and parts assembly - engine, transmission box, torque and torque of the bottom plate bolts; 3C electronic and precision assembly - cellular phones, laptop computers, small torque of video modules, tight; — — — — — — — — — — torque and — — to the bottom plate — — — to the engine, — to the engine, the transmission, — to the bottom, the torque, the (a) Household and white household electricity - air conditioners compressors, washing machines, refrigerator assembly torque management; engineering machinery and heavy works - large-scale bolts, wheels, screws'high torque hardening; — Aeronautical and orbital traffic - recheck and record of key connecting to torque; medical instruments and instruments - assembly and exit inspection of microtrangles
Q: What is the accuracy of 120 GCK? Q: What is the accuracy of 120?SQQQQ
A: This model is 3 per cent (indicative value) and the measurements are stable and reliable within the recommended range. (indicative value
Q: Is there any other measure in this series?!
A: Yes. The Adable Life tore series has 7 models, and the number of models is not available. The process covers 20~60 to 400~2000, which is selected in the form of a tight torque; for a complete comparison see the " Series I " table on this page
Q: Where does KANON (KANON) belong? Q: What brand is this?s
A: KANON is the brand of the torque tool of the Japanese factory KANON (NAKAMURA MFG. Co., ff.), which was created in the year 1938, which is the first to be created by the Japanese company 1938. The main battalion has a manual twister, a torque, a torque test instrument and a torque device, and has production and sales outlets both inside Japan and abroad.!
Q: Is this product imported in Japanese original? Q
A: The KANON product listed at this station is the prototype of the Japanese factory KANON, which is produced in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd., with randomly attached inspection reports; please specify at the time of submission if a third party calibration certificate is required
Q: Can you open a calibration certificate or do an annual calibration?!
A: Yes. The KANON full-system tortile tool can produce calibration data, and the station provides a check-and-annual calibration service based on ISO 6789-1/ISO 6789-2
Q: How should the wrench choose the measure?!
A: 20%~100%% area recommended to use torque to land in tool process (partly numbered with 10%~100%) The least error measurement margin when the torque approach the maximum quantum range and the tool lifetime is the longest; the working conditions below the mass 20 per cent suggest a smaller process model
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.