Home › Products

Product Overview

KANON KDTA-N20GTH-UC Torque Testers (Model KDTA-N20GTH-UC) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KANON KDTA-N20GTH-UC Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON KDTA-N20GTH-UC Torque Testers

Technical Specifications

ModelKDTA-N20GTH-UC
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryDigital Torque Testers( Place Type · Large Capacity)
Range / Display Range20~200 kgf·cm / 2~20 N·m
Conversion Range0.1 kgf·cm / 0.01 N·m
Minimum Reading (Increment)12 mm
Square Drive Size340×220×169
Weight12 kg
Accuracy±1%(Indication Value)
OriginJapan
Calibration BasisISO 6789-1 / ISO 6789-2
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Standing from KANON/ NAKAMURA MFG. Co., ff.) KDTA-N20GTH-UC is a piece in the KDTA-GTH-UC series, which is a piece of the video from the video series. , X XX, X , XZ Q XV Q, he unizoquis are used to create a new environment for the benefit of the population..! Randomly attached to the counterpart header (12.7×22 / 19.05×30 / 25.4×30 etc.). Reference: GTH

KDTA-GTH-UC Model 1 View

The following table shows the mass and weight of all 6 models in the KDTA-GTH-UC series, which allows for the selection of the actual hard torque type

ModelProcess / Display RangeWeight
KDTA-N20GTH-UC20~200 kgf·cm / 2~20 N·m12 kg
KDTA-N100GTH-UC100~1000 kgf·cm / 10~100 N·m18 kg
KDTA-N200GTH-UC200~2000 kgf·cm / 20~200 N·m20 kg
KDTA-N300GTH-UC300~3000 kgf·cm / 30~300 N·m40 kg
KDTA-N600GTH-UC600~6000 kgf·cm / 60~600 N·m90 kg
KDTA-N1000GTH-UC10~100 kgf·m / 100~1000 N·m100 kg

Key Advantages

  1. Large-volume landing structure to verify the torque wrench of 20 N·m ~ 1000 N·mScreaked wrenchScreaksScret
  2. The body is high and wide, and it is not moved when it is subject to a heavy rectangular reaction
  3. kgf cm / kgf m to N.m
  4. Three measurement models TRACK / Peaks01 / Peak to Peaks01Scrells
  5. Precision 1% (indicative value)

Applied trade & test object

(a) Automobiles and parts assembly - engine, transmission box, torque and torque of the bottom plate bolts; 3C electronic and precision assembly - cellular phones, laptop computers, small torque of video modules, tight; — — — — — — — — — — torque and — — to the bottom plate — — — to the engine, — to the engine, the transmission, — to the bottom, the torque, the (a) Household and white household electricity - air conditioners compressors, washing machines, refrigerator assembly torque management; engineering machinery and heavy works - large-scale bolts, wheels, screws'high torque hardening; — Aeronautical and orbital traffic - recheck and record of key connecting to torque; medical instruments and instruments - assembly and exit inspection of microtrangles

FAQ

Q: What is the accuracy of KDTA-N20GTH-UC?

A: This model is 1 per cent (indicative value) and the measurements are stable and reliable within the recommended range. (indicative value

Q: Is there any other measure in this series?!

A: Yes. The series of the Laillarian treasurealyzers has 6 models, and the series has been created to create a new one.! The process covers 20~200 kgf Cm/ 2~20 N·m to 10~100 kgf.m/100~1000 N·m,Screaks of the Screaks of the Screws of the Select to use the hard torque size; see full comparison to the " Series One View " table on this page._Face

Q: Where does KANON (KANON) belong? Q: What brand is this?s

A: KANON is the brand of the torque tool of the Japanese factory KANON (NAKAMURA MFG. Co., ff.), which was created in the year 1938, which is the first to be created by the Japanese company 1938. The main battalion has a manual twister, a torque, a torque test instrument and a torque device, and has production and sales outlets both inside Japan and abroad.!

Q: Is this product imported in Japanese original? Q

A: The KANON product listed at this station is the prototype of the Japanese factory KANON, which is produced in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd., with randomly attached inspection reports; please specify at the time of submission if a third party calibration certificate is required

Q: Can you open a calibration certificate or do an annual calibration?!

A: Yes. The KANON full-system tortile tool can produce calibration data, and the station provides a check-and-annual calibration service based on ISO 6789-1/ISO 6789-2

Q: How should the wrench choose the measure?!

A: 20%~100%% area recommended to use torque to land in tool process (partly numbered with 10%~100%) The least error measurement margin when the torque approach the maximum quantum range and the tool lifetime is the longest; the working conditions below the mass 20 per cent suggest a smaller process model

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON KDTA-N1000GTH-UC Torque Testers
Torque Testers

KANON KDTA-N1000GTH-UC Torque Testers

KDTA-N1000GTH-UC
└ KANON
KANON KDTA-N600GTH-UC Torque Testers
Torque Testers

KANON KDTA-N600GTH-UC Torque Testers

KDTA-N600GTH-UC
└ KANON
KANON KDTA-N300GTH-UC Torque Testers
Torque Testers

KANON KDTA-N300GTH-UC Torque Testers

KDTA-N300GTH-UC
└ KANON
KANON KDTA-N200GTH-UC Torque Testers
Torque Testers

KANON KDTA-N200GTH-UC Torque Testers

KDTA-N200GTH-UC
└ KANON
KANON KDTA-N100GTH-UC Torque Testers
Torque Testers

KANON KDTA-N100GTH-UC Torque Testers

KDTA-N100GTH-UC
└ KANON
KANON KDTA-N200GTS-UC Torque Testers
Torque Testers

KANON KDTA-N200GTS-UC Torque Testers

KDTA-N200GTS-UC
└ KANON