Home › Products

Product Overview

KANON PITA20 Precision Measuring Tools (Model PITA20) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. KANON PITA20 Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Precision Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON PITA20 Precision Measuring Tools

Technical Specifications

ModelPITA20
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryFlat Head Caliper
Measuring Range200 mm
Minimum Reading0.05 mm
Maximum Permissible Error MPE_E±0.05
Maximum Permissible Error MPE_S±0.10
Overall length287 mm
Weight160g
OriginJapan
Calibration BasisJIS B 7507 / ISO 13385-1
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Standing from KANON) PITA20 is a piece in the PITA series, which is a piece of the "Standard" series.Standing the "Standards" and "Standards" and "Standards" and "Standards" and "Standards" and "Standards" and "Standards" and "Standards" and " The flat-head cursor card of the main side opening slots is not tired of the small reflective and long readings. PITA40 without depth poles; PITA10 has a minimum reading of 19 mm 20.Screen Sp.ScortsScorres.ss Sp.sss St.s.Sp.Sp.S The remaining model is 39 mm 20 equal. Reference: NAKAMURA, MFG

PITA Model 1 View

The following table shows the range and minimum readings of all PITA models in the PITA series, which allows for the selection of the models by the size of the worksheet._. Reference: 5

ModelMeasuring rangeMinimum Reading
PITA10100 mm0.05 mm
PITA15150 mm0.05 mm
PITA20200 mm0.05 mm
PITA30300 mm0.05 mm
PITA40400 mm0.05 mm

Key Advantages

  1. The main ruler opens a thin slot, reduces the tic mirror reflection, and the reading is clearer
  2. Green fills the slots, further reducing the reflection and reducing the weariness of the eyes
  3. The claws are designed for flatheads and are suitable for measuring the plane, the stairs and the inner hole
  4. Volume fine-tuning device for PITA40 and above
  5. Scale 39 mm 20 (S19 mm 20)Screak . Reference: PITA10

Applied trade & measure objects.%1%2

Mechanical processing and car-crypting processes - inter-process measurements of axle, aperture, ditch and step; acceptance and inspection of automobiles and spare parts - flancing, O-circle, shell aperture; bearing and precision hardware - internal and external, — Quantities test for narrow slots and thin wall elements; molds and treatments - measurements of cavity depth, pore distance and positioning dimensions; electrical and electronic parts - measurements of small aperture, thin thickness and mini-crowds; quality control and metering room - for food, — — — — — — — — — — — — — — — — — — — — — — — — First check for confirmation and shipment.!

FAQ

Q: What is the range of measurements and minimum readings for PITA20?

A: This model is measured in the range 200, with a minimum reading 0.05 and a maximum permissible error MOPE_E is 0.05

Q: Is there any other specification to this series?!?

A: Yes. PITA of 5 models with measurements ranging from 100 to 400, selected by piece size; complete comparison to the table " Series I " on this page

Q: Is the KANON (KANON) bulk set in Japanese original?

A: KANON is the brand of the Twisty and Twisty Tool of the Japanese KANON (NAKAMURA MFG. Co., ff.) which was created in the year 1938, which is the first to be created by the Japanese company NAKAMURA.. Q. Q. Q. Q. Q. Q. Q. The bulk of the equipment was manufactured at the original plant in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd

Q: Can you open the calibration certificate?

A: Yes. This station provides a check-and-reading service, which is based on JIS B 7507 for cursor and JIS B 7507/ISO 13385-1 for cursors and provides calibration data

Q: How do you choose the cursor and the number of the bar?!?

A: The cursor ruler is not battery-resistant, oil-resistant and suitable for long-term use in the workshop site; the number of the card scale readings is visual and can be considered with the same resolution as 0.01 mm, which is suitable for quality checks and for those jobs requiring rapid interpretation. Select by using environment.!

Q: What does MPE mean?. Q

A: MPE is the maximum permissible error (Maxamum Perpicellbe) as the standard maximum for error.E corresponds to the error in the value,.Sp.St.sp.St.sp.St.St.A.Sp.St.Sp.A.A.S.A.S.St.S.A.S.A.S.S.S.S. Additional errors such as parallel measurements of the MEE_S counterpart surface should not be exceeded in actual use.__S

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON SHT-3-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-60J Precision Measuring Tools

SHT-3-60J
└ KANON Gauges
KANON SHT-3-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-30J Precision Measuring Tools

SHT-3-30J
└ KANON Gauges
KANON SHT-1-200 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-200 Precision Measuring Tools

SHT-1-200
└ KANON Gauges
KANON SHT-1-150 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-150 Precision Measuring Tools

SHT-1-150
└ KANON Gauges
KANON SHT-1-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-60J Precision Measuring Tools

SHT-1-60J
└ KANON Gauges
KANON SHT-1-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-30J Precision Measuring Tools

SHT-1-30J
└ KANON Gauges