Home › Products

Product Overview

KANON LKSM300×12" Precision Measuring Tools (Model LKSM300×12") is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. KANON LKSM300×12" Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Precision Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON LKSM300×12" Precision Measuring Tools

Technical Specifications

ModelLKSM300×12"
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryStandard Caliper
Measuring Range300 mm×12"
Minimum Reading0.05 mm
Maximum Permissible Error MPE_E±0.05
Maximum Permissible Error MPE_S±0.10
Overall length390 mm
Weight250g
OriginJapan
Calibration BasisJIS B 7507 / ISO 13385-1
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (St. KANON Production / NAKAMURA MFG. Co., (f) LKSM3004 "is a section of the LKSM series, the standard KANON cursor carve, the outer diameter/ inner diameter/ depth/ step 4 common to all. X — LKSM is a two-temporal cursor ruler. Reference: 12. Reference values: 300.

LKSM Model 1 View

The following table shows the range and minimum readings of all LKSM models in the LKSM series, which allows for the selection of the models by the size of the worksheet._. Reference: 3

ModelMeasuring rangeMinimum Reading
LKSM150×6"150 mm×6"0.05 mm
LKSM200×8"200 mm×8"0.05 mm
LKSM300×12"300 mm×12"0.05 mm

Key Advantages

  1. Aerobics, internals, depths and steps, a general measure of coverage
  2. Specifications: 39 mm 0.05 mm 20. Please contact our engineers for the full technical wording.
  3. The tectonics are clear and the long-term use is not flimsy
  4. With a slight thrust wheel, one hand can move the ruler
  5. A depth pole, with depth measurements.Aw

Applied trade & measure objects.%1%2

Mechanical processing and car-crypting processes - inter-process measurements of axle, aperture, ditch and step; acceptance and inspection of automobiles and spare parts - flancing, O-circle, shell aperture; bearing and precision hardware - internal and external, — Quantities test for narrow slots and thin wall elements; molds and treatments - measurements of cavity depth, pore distance and positioning dimensions; electrical and electronic parts - measurements of small aperture, thin thickness and mini-crowds; quality control and metering room - for food, — — — — — — — — — — — — — — — — — — — — — — — — First check for confirmation and shipment.!

FAQ

Q: What is the range and minimum reading of the measurements of LKSM3001?. Reference: 12. Reference values: 300.

A: This model measure is 300 mm " Minimum reading 0.05 with a maximum permissible error 0.05. Reference: 12

Q: Is there any other specification to this series?!?

A: Yes. LKSM of 3 models with measurements ranging from 150 mm" to 300 mm" to " by piece size; of the size of the product of the product of the product of the product LKSM; of the output of the product; of the output of the product; of the output of the product; of A full comparison is provided in the “Serious Model One” table on this page.!. Reference: 6, 12

Q: Is the KANON (KANON) bulk set in Japanese original?

A: KANON is the brand of the Twisty and Twisty Tool of the Japanese KANON (NAKAMURA MFG. Co., ff.) which was created in the year 1938, which is the first to be created by the Japanese company NAKAMURA.. Q. Q. Q. Q. Q. Q. Q. The bulk of the equipment was manufactured at the original plant in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd

Q: Can you open the calibration certificate?

A: Yes. This station provides a check-and-reading service, which is based on JIS B 7507 for cursor and JIS B 7507/ISO 13385-1 for cursors and provides calibration data

Q: How do you choose the cursor and the number of the bar?!?

A: The cursor ruler is not battery-resistant, oil-resistant and suitable for long-term use in the workshop site; the number of the card scale readings is visual and can be considered with the same resolution as 0.01 mm, which is suitable for quality checks and for those jobs requiring rapid interpretation. Select by using environment.!

Q: What does MPE mean?. Q

A: MPE is the maximum permissible error (Maxamum Perpicellbe) as the standard maximum for error.E corresponds to the error in the value,.Sp.St.sp.St.sp.St.St.A.Sp.St.Sp.A.A.S.A.S.St.S.A.S.A.S.S.S.S. Additional errors such as parallel measurements of the MEE_S counterpart surface should not be exceeded in actual use.__S

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON SHT-3-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-60J Precision Measuring Tools

SHT-3-60J
└ KANON Gauges
KANON SHT-3-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-30J Precision Measuring Tools

SHT-3-30J
└ KANON Gauges
KANON SHT-1-200 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-200 Precision Measuring Tools

SHT-1-200
└ KANON Gauges
KANON SHT-1-150 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-150 Precision Measuring Tools

SHT-1-150
└ KANON Gauges
KANON SHT-1-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-60J Precision Measuring Tools

SHT-1-60J
└ KANON Gauges
KANON SHT-1-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-30J Precision Measuring Tools

SHT-1-30J
└ KANON Gauges