Home › Products

Product Overview

KANON E-RM-2-15BL Precision Measuring Tools (Model E-RM-2-15BL) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. KANON E-RM-2-15BL Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Precision Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON E-RM-2-15BL Precision Measuring Tools

Technical Specifications

ModelE-RM-2-15BL
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryDigital Position in Caliper
Measuring Rangeabove 25~150 / under 20~150
Minimum Reading0.01 mm
Maximum Permissible Error MPE_E±0.05
Applicable Hole (Minimum / Maximum)Φ1 / Φ5 mm
Contact Point Angle53°
Overall length254 mm
Power SupplySR44 ×1
Weight160g
OriginJapan
Calibration BasisJIS B 7507 / ISO 13385-1
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Standing from KANON) E-RM-2-15BL is a piece in the E-RM-2 series, which is a piece of the "Standard" series.Standing the "Standard" series.ssssStampsss of the Internet, and also the "Standards" are a piece in the series of E-RM-2s.s of the Internet, and the Internet A digitally visible version of the RM-2 bias type, which allows the centre spacing of the hole to be measured. The offset header is suitable for work that is not in the same axis; the scale is up/down two sets of header markings._. Reference: NAKAMURA, MFG

E-RM-2 Model 1 View

The following table shows the range and minimum readings of all 3 models in the E-RM-2 series, which allows for the selection of the models by the size of the worksheet

ModelMeasuring rangeMinimum Reading
E-RM-2-15BLUp 25~150/ Down 20~1500.01 mm
E-RM-2-30BLUp 35~300/ Down 25~3000.01 mm
E-RM-2-60BUp 35~600/ Down 25~6000.01 mm

Key Advantages

  1. The diagonal heading is set, and the two holes are not in the same axis to locate the center
  2. Set table of specifications for top/ bottom header counters
  3. Discreet 0.01 mm, LCD read directly
  4. Apertures, 1~, 29 mm (by type)
  5. SR44 button battery poweredCharlie

Applied trade & measure objects.%1%2

Mechanical processing and car-crypting processes - inter-process measurements of axle, aperture, ditch and step; acceptance and inspection of automobiles and spare parts - flancing, O-circle, shell aperture; bearing and precision hardware - internal and external, — Quantities test for narrow slots and thin wall elements; molds and treatments - measurements of cavity depth, pore distance and positioning dimensions; electrical and electronic parts - measurements of small aperture, thin thickness and mini-crowds; quality control and metering room - for food, — — — — — — — — — — — — — — — — — — — — — — — — First check for confirmation and shipment.!

FAQ

Q: What is the range of measurements and minimum readings for E-RM-2-15BL?

A: This model is measured in the range of 25~150/under 20~150, with a minimum reading 0.01, The maximum permissible error MOPE_E is 0.05

Q: Is there any other specification to this series?!?

A: Yes. E-RM-2 of 3 models, Measurement range from upper 25~150/ 20~150 to upper 35~600/ 25~ZQ9Sp ,! Select by worksheet size; see full comparison to the " Series I " table on this page._._. Reference: 600

Q: Is the KANON (KANON) bulk set in Japanese original?

A: KANON is the brand of the Twisty and Twisty Tool of the Japanese KANON (NAKAMURA MFG. Co., ff.) which was created in the year 1938, which is the first to be created by the Japanese company NAKAMURA.. Q. Q. Q. Q. Q. Q. Q. The bulk of the equipment was manufactured at the original plant in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd

Q: Can you open the calibration certificate?

A: Yes. This station provides a check-and-reading service, which is based on JIS B 7507 for cursor and JIS B 7507/ISO 13385-1 for cursors and provides calibration data

Q: How do you choose the cursor and the number of the bar?!?

A: The cursor ruler is not battery-resistant, oil-resistant and suitable for long-term use in the workshop site; the number of the card scale readings is visual and can be considered with the same resolution as 0.01 mm, which is suitable for quality checks and for those jobs requiring rapid interpretation. Select by using environment.!

Q: What does MPE mean?. Q

A: MPE is the maximum permissible error (Maxamum Perpicellbe) as the standard maximum for error.E corresponds to the error in the value,.Sp.St.sp.St.sp.St.St.A.Sp.St.Sp.A.A.S.A.S.St.S.A.S.A.S.S.S.S. Additional errors such as parallel measurements of the MEE_S counterpart surface should not be exceeded in actual use.__S

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON SHT-3-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-60J Precision Measuring Tools

SHT-3-60J
└ KANON Gauges
KANON SHT-3-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-30J Precision Measuring Tools

SHT-3-30J
└ KANON Gauges
KANON SHT-1-200 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-200 Precision Measuring Tools

SHT-1-200
└ KANON Gauges
KANON SHT-1-150 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-150 Precision Measuring Tools

SHT-1-150
└ KANON Gauges
KANON SHT-1-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-60J Precision Measuring Tools

SHT-1-60J
└ KANON Gauges
KANON SHT-1-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-30J Precision Measuring Tools

SHT-1-30J
└ KANON Gauges