KANON E-RM-2-60B Precision Measuring Tools (Model E-RM-2-60B) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. KANON E-RM-2-60B Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: KANON | Category: Precision Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | E-RM-2-60B |
|---|---|
| Brand | KANON(KANON / NAKAMURA MFG. Co., Ltd.) |
| Category | Digital Position in Caliper |
| Measuring Range | above 35~600 / under 25~600 |
| Minimum Reading | 0.01 mm |
| Maximum Permissible Error MPE_E | ±0.05 |
| Applicable Hole (Minimum / Maximum) | Φ3 / Φ29 mm |
| Contact Point Angle | 40° |
| Overall length | 799 mm |
| Power Supply | SR44 ×1 |
| Weight | 1.7kg |
| Origin | Japan |
| Calibration Basis | JIS B 7507 / ISO 13385-1 |
| Supply Notes | Guangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
KANON (Standing from KANON) E-RM-2-60B is a piece in the E-RM-2 series, which is a piece of the "Standard" series.Standing the "Standard" series.ssssStampsss of the Internet, and also the "Standards" are a piece in the series of E-RM-2s.s of the Internet, and the Internet A digitally visible version of the RM-2 bias type, which allows the centre spacing of the hole to be measured. The offset header is suitable for work that is not in the same axis; the scale is up/down two sets of header markings._. Reference: NAKAMURA, MFG
The following table shows the range and minimum readings of all 3 models in the E-RM-2 series, which allows for the selection of the models by the size of the worksheet
| Model | Measuring range | Minimum Reading |
|---|---|---|
| E-RM-2-15BL | Up 25~150/ Down 20~150 | 0.01 mm |
| E-RM-2-30BL | Up 35~300/ Down 25~300 | 0.01 mm |
| E-RM-2-60B | Up 35~600/ Down 25~600 | 0.01 mm |
Mechanical processing and car-crypting processes - inter-process measurements of axle, aperture, ditch and step; acceptance and inspection of automobiles and spare parts - flancing, O-circle, shell aperture; bearing and precision hardware - internal and external, — Quantities test for narrow slots and thin wall elements; molds and treatments - measurements of cavity depth, pore distance and positioning dimensions; electrical and electronic parts - measurements of small aperture, thin thickness and mini-crowds; quality control and metering room - for food, — — — — — — — — — — — — — — — — — — — — — — — — First check for confirmation and shipment.!
Q: What is the range of measurements and minimum readings for E-RM-2-60B?
A: This model is measured in the range of 35~600/under 25~600, with a minimum reading 0.01, The maximum permissible error MOPE_E is 0.05
Q: Is there any other specification to this series?!?
A: Yes. E-RM-2 of 3 models, Measurement range from upper 25~150/ 20~150 to upper 35~600/ 25~ZQ9Sp ,! Select by worksheet size; see full comparison to the " Series I " table on this page._._. Reference: 600
Q: Is the KANON (KANON) bulk set in Japanese original?
A: KANON is the brand of the Twisty and Twisty Tool of the Japanese KANON (NAKAMURA MFG. Co., ff.) which was created in the year 1938, which is the first to be created by the Japanese company NAKAMURA.. Q. Q. Q. Q. Q. Q. Q. The bulk of the equipment was manufactured at the original plant in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd
Q: Can you open the calibration certificate?
A: Yes. This station provides a check-and-reading service, which is based on JIS B 7507 for cursor and JIS B 7507/ISO 13385-1 for cursors and provides calibration data
Q: How do you choose the cursor and the number of the bar?!?
A: The cursor ruler is not battery-resistant, oil-resistant and suitable for long-term use in the workshop site; the number of the card scale readings is visual and can be considered with the same resolution as 0.01 mm, which is suitable for quality checks and for those jobs requiring rapid interpretation. Select by using environment.!
Q: What does MPE mean?. Q
A: MPE is the maximum permissible error (Maxamum Perpicellbe) as the standard maximum for error.E corresponds to the error in the value,.Sp.St.sp.St.sp.St.St.A.Sp.St.Sp.A.A.S.A.S.St.S.A.S.A.S.S.S.S. Additional errors such as parallel measurements of the MEE_S counterpart surface should not be exceeded in actual use.__S
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.