Home › Products

Product Overview

KANON EHK30J Precision Measuring Tools (Model EHK30J) is a Precision Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. KANON EHK30J Precision Measuring Tools — Precision Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Precision Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON EHK30J Precision Measuring Tools

Technical Specifications

ModelEHK30J
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryDigital Rotatable Wire Height Gauges
Measuring Range0~300(with Rotatable Wire Head when 10~300)
Minimum Reading0.01 mm
Maximum Permissible Error MPE_E±0.05
Plate Length B120.0 mm
Plate Height C68.0 mm
Plate Thickness D32.0 mm
Wire Head Standard ConfigurationRS-10(Rotatable Type)
Wire Head Dimensions A / B105.5 / 36 mm
Wire Head Thickness C / D12.7 / 9 mm
Measurement modeABS to Type / INC Increment Quantity Type
Overall length450.5 mm
Power SupplySR44 ×1
Weight2.2kg
OriginJapan
Calibration BasisOutput Check (can Detection Tool Calibration Certificate)
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Standing from KANON/ NAKAMURA. Co., ff.) EHK30J is a piece in the EHK series, which is a piece of the video from the video series, which is used to create a new video. . . .. The two underlined sides of the rotor head (Kurukuri) are on the same plane and are desirable in both the opposite direction. The two underlined sides of the rotated head RS-10 are on the same plane. No conversion is required for the positive or reverse orientation point when underlined; the valid mass when using the underlined header is 10~300 mm._. Reference: MFG

EHK Model 1 View

The following table shows the range and minimum readings of all EHK models in the EHK series, which allows for the selection of the models by the size of the worksheet. Reference: 1

ModelMeasuring rangeMinimum Reading
EHK30J0~300 (10~300 with a spin-draw head)0.01 mm

Key Advantages

  1. ABS / INC measurements, absolute (ABS) is not required to be zero per timeSpwxSpS
  2. Any location can be zero, supporting relative measurements to the height of the steps
  3. Rotation head RS-10 is configured standard, two lined measurements are located on the same plane
  4. Lineheads rotated, no readings were required for both front and side measurements
  5. Straight reading, resolution 0.01 mm, balancing lined, altitude with step measurementsStightness
  6. Lineheads are common to SHT-3-30J and can be used interchangeably

Applied trade & measure objects.%1%2

Mechanical processing and car-crypting processes - inter-process measurements of axle, aperture, ditch and step; acceptance and inspection of automobiles and spare parts - flancing, O-circle, shell aperture; bearing and precision hardware - internal and external, — Quantities test for narrow slots and thin wall elements; molds and treatments - measurements of cavity depth, pore distance and positioning dimensions; electrical and electronic parts - measurements of small aperture, thin thickness and mini-crowds; quality control and metering room - for food, — — — — — — — — — — — — — — — — — — — — — — — — First check for confirmation and shipment.!

FAQ

Q: What is the range of measurements and minimum readings for EHK30J?

A: This model measure is 0~300 (10~300 at the head of the rotation), minimum reading 0.01, The maximum permissible error MOPE_E is 0.05

Q: Is there any other specification to this series?!?

A: Yes. EHK of 1 models, The range of measurements from 0~300 (10~300 with a spin-lined head) to 0~300 (10 with a spin-lined head) (0) to 0( with a spin-lined head Z ~300, ~ ~ ~SzQ8 Select by worksheet size; see full comparison to the " Series I " table on this page

Q: Is the KANON (KANON) bulk set in Japanese original?

A: KANON is the brand of the Twisty and Twisty Tool of the Japanese KANON (NAKAMURA MFG. Co., ff.) which was created in the year 1938, which is the first to be created by the Japanese company NAKAMURA.. Q. Q. Q. Q. Q. Q. Q. The bulk of the equipment was manufactured at the original plant in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd

Q: Can you open the calibration certificate?

A: Yes. This station provides a check-and-reading service, which is based on JIS B 7507 for cursor and JIS B 7507/ISO 13385-1 for cursors and provides calibration data

Q: How do you choose the cursor and the number of the bar?!?

A: The cursor ruler is not battery-resistant, oil-resistant and suitable for long-term use in the workshop site; the number of the card scale readings is visual and can be considered with the same resolution as 0.01 mm, which is suitable for quality checks and for those jobs requiring rapid interpretation. Select by using environment.!

Q: What does MPE mean?. Q

A: MPE is the maximum permissible error (Maxamum Perpicellbe) as the standard maximum for error.E corresponds to the error in the value,.Sp.St.sp.St.sp.St.St.A.Sp.St.Sp.A.A.S.A.S.St.S.A.S.A.S.S.S.S. Additional errors such as parallel measurements of the MEE_S counterpart surface should not be exceeded in actual use.__S

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON SHT-3-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-60J Precision Measuring Tools

SHT-3-60J
└ KANON Gauges
KANON SHT-3-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-3-30J Precision Measuring Tools

SHT-3-30J
└ KANON Gauges
KANON SHT-1-200 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-200 Precision Measuring Tools

SHT-1-200
└ KANON Gauges
KANON SHT-1-150 Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-150 Precision Measuring Tools

SHT-1-150
└ KANON Gauges
KANON SHT-1-60J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-60J Precision Measuring Tools

SHT-1-60J
└ KANON Gauges
KANON SHT-1-30J Precision Measuring Tools
Precision Measuring Tools

KANON SHT-1-30J Precision Measuring Tools

SHT-1-30J
└ KANON Gauges